M95010-WMN6P

{
  "slug": "m95010-wmn6p",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "m95010-wmn6p",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "m95010-wmn6p.kicad_sym",
    "m95010-wmn6p.kicad_mod",
    "m95010-wmn6p.glb",
    "m95010-wmn6p.step",
    "m95010-wmn6p.lbr",
    "docs/hero.png",
    "docs/m95010-wmn6p-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "m95010-wmn6p-hero.glb",
    "m95010-wmn6p-hero.overlay.json",
    "m95010-wmn6p-etched.glb"
  ],
  "component": {
    "mpn": "M95010-WMN6P",
    "manufacturer": "STMicroelectronics",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.st.com/resource/en/datasheet/m95010-wmn6p.pdf",
    "parts": {
      "symbol": "m95010-wmn6p.kicad_sym",
      "footprint": "m95010-wmn6p.kicad_mod",
      "model_3d": "m95010-wmn6p-hero.glb",
      "model_3d_plain": "m95010-wmn6p-etched.glb",
      "model_3d_step": "m95010-wmn6p-etched.step",
      "model_3d_step_plain": "m95010-wmn6p.step",
      "lbr": "m95010-wmn6p.lbr"
    },
    "distributor_links": {
      "lcsc": "C1349403",
      "digikey": "497-8600-5-ND",
      "mouser": "511-M95010-WMN6P"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T16:33:35Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-8600-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-M95010-WMN6P",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "S",
        "type": "input",
        "description": "Chip Select: driving S high deselects the device and puts Q in high impedance, and driving it low selects the device; after power-up a falling edge on S is required before any instruction."
      },
      {
        "number": "2",
        "name": "Q",
        "type": "output",
        "description": "Serial Data Output shifts data out on the falling edge of C and is high impedance when the device is deselected or in the Hold condition."
      },
      {
        "number": "3",
        "name": "W",
        "type": "input",
        "description": "Write Protect: when held low, writes to the memory are disabled while other operations remain enabled, and W must be driven high or low and must not be left floating."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground: the reference for the VCC supply voltage."
      },
      {
        "number": "5",
        "name": "D",
        "type": "input",
        "description": "Serial Data Input receives instructions, addresses and data to be written, latched on the rising edge of the Serial Clock C."
      },
      {
        "number": "6",
        "name": "C",
        "type": "input",
        "description": "Serial Clock provides the serial interface timing: instructions, addresses and data on D are latched on its rising edge, and data on Q changes after its falling edge."
      },
      {
        "number": "7",
        "name": "HOLD",
        "type": "input",
        "description": "Hold pauses serial communication without deselecting the device; during Hold, Q is high impedance and D and C are Don't Care, and the device must be selected with S low to enter Hold."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage: 2.5 V to 5.5 V for the M950x0-W (M95010-W), which must remain stable and within VCC(min) to VCC(max) during all operations."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's pin-to-signal assignment is given only in Figure 2 (8-pin package connections, page ; The MPN M95010-WMN6P is the M95010-W device in package MN (SO8, 150 mil). The datasheet covers the M"
        ],
        "pages_sent": 46,
        "cost_usd": 0.336,
        "at": "2026-10-30T16:33:17"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/m95010-wmn6p.pdf",
        "pages": 46,
        "sha256": "1b7ee07d5879b564",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "m95010-wmn6p.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "m95010-wmn6p-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6e0ce475ac4b8ff3286193964164eb0a8f284b999abbffb7ae683d76e139ac28",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SO8N (MN)",
      "source_page": 40,
      "D": {
        "nom_mm": 4.9,
        "range_mm": [
          4.8,
          5.0
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.75,
        "range_mm": [
          null,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "m95010-wmn6p.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}