main
Ray
Initial commit: component/m93c56-rdw6tp
ce9ea9d
M93C56-RDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M93C56-RDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; must be driven to VSS during power-up (pull-down recommended) and must be brought low for at least tSLSH between consecutive instruction cycles. |
| 2 | C | input | Serial Clock input; operates from DC up to 2 MHz and must be held low when Chip Select rises, with an external pull-down recommended if the bus master can go high impedance. |
| 3 | D | input | Serial Data input, sampled on the rising edge of the Serial Clock for the start bit, op-code, address and data bits. |
| 4 | Q | output | Serial Data output that shifts out read data on rising clock edges, shows READY/BUSY status (Q=0 busy, Q=1 ready) during write or erase cycles, and is high impedance when the device is deselected. |
| 5 | VSS | power_in | Ground reference for the device. |
| 6 | ORG | input | Organization Select: x16 when left unconnected or tied to VCC, x8 when tied to VSS, and should be tied to VSS or VCC in standby for minimum power. |
| 7 | DU | passive | Don't Use pin reserved for ST test sequences, which may be left unconnected or connected to VCC or VSS. |
| 8 | VCC | power_in | Supply voltage of 1.8 V to 5.5 V for the M93Cx6-R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC and VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M93C56-RDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m93c56-rdw6tp-etched.step/m93c56-rdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m93c56-rdw6tp.step/m93c56-rdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (35 pp, sha256
7b1f76e6c602697a, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M93C56-RDW6TP
**STMicroelectronics** · EEPROM · TSSOP-8
M93C56-RDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; must be driven to VSS during power-up (pull-down recommended) and must be brought low for at least tSLSH between consecutive instruction cycles. |
| 2 | C | input | Serial Clock input; operates from DC up to 2 MHz and must be held low when Chip Select rises, with an external pull-down recommended if the bus master can go high impedance. |
| 3 | D | input | Serial Data input, sampled on the rising edge of the Serial Clock for the start bit, op-code, address and data bits. |
| 4 | Q | output | Serial Data output that shifts out read data on rising clock edges, shows READY/BUSY status (Q=0 busy, Q=1 ready) during write or erase cycles, and is high impedance when the device is deselected. |
| 5 | VSS | power_in | Ground reference for the device. |
| 6 | ORG | input | Organization Select: x16 when left unconnected or tied to VCC, x8 when tied to VSS, and should be tied to VSS or VCC in standby for minimum power. |
| 7 | DU | passive | Don't Use pin reserved for ST test sequences, which may be left unconnected or connected to VCC or VSS. |
| 8 | VCC | power_in | Supply voltage of 1.8 V to 5.5 V for the M93Cx6-R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC and VSS pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M93C56-RDW6TP`
- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `m93c56-rdw6tp-etched.step` / `m93c56-rdw6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m93c56-rdw6tp.step` / `m93c56-rdw6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589828441756635136) (35 pp, sha256 `7b1f76e6c602697a`, retrieved 2026-10-03, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m93c56-rdw6tp-datasheet.pdf)