← Commit history

Initial commit: component/m93c56-rdw6tp

Ray ·ce9ea9d480 ·
2 files changed +204
README.mdadded+44
@@ -0,0 +1,44 @@+# M93C56-RDW6TP++**STMicroelectronics** · EEPROM · TSSOP-8++M93C56-RDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip Select input; must be driven to VSS during power-up (pull-down recommended) and must be brought low for at least tSLSH between consecutive instruction cycles. |+| 2 | C | input | Serial Clock input; operates from DC up to 2 MHz and must be held low when Chip Select rises, with an external pull-down recommended if the bus master can go high impedance. |+| 3 | D | input | Serial Data input, sampled on the rising edge of the Serial Clock for the start bit, op-code, address and data bits. |+| 4 | Q | output | Serial Data output that shifts out read data on rising clock edges, shows READY/BUSY status (Q=0 busy, Q=1 ready) during write or erase cycles, and is high impedance when the device is deselected. |+| 5 | VSS | power_in | Ground reference for the device. |+| 6 | ORG | input | Organization Select: x16 when left unconnected or tied to VCC, x8 when tied to VSS, and should be tied to VSS or VCC in standby for minimum power. |+| 7 | DU | passive | Don't Use pin reserved for ST test sequences, which may be left unconnected or connected to VCC or VSS. |+| 8 | VCC | power_in | Supply voltage of 1.8 V to 5.5 V for the M93Cx6-R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC and VSS pins. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M93C56-RDW6TP`+- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`+- 3D model: TSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `m93c56-rdw6tp-etched.step` / `m93c56-rdw6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m93c56-rdw6tp.step` / `m93c56-rdw6tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589828441756635136) (35 pp, sha256 `7b1f76e6c602697a`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m93c56-rdw6tp-datasheet.pdf)
page.jsonadded+160
@@ -0,0 +1,160 @@+{+  "slug": "m93c56-rdw6tp",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m93c56-rdw6tp",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m93c56-rdw6tp.kicad_sym",+    "m93c56-rdw6tp.kicad_mod",+    "m93c56-rdw6tp.glb",+    "m93c56-rdw6tp.step",+    "m93c56-rdw6tp.lbr",+    "docs/hero.png",+    "docs/m93c56-rdw6tp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "m93c56-rdw6tp-hero.glb",+    "m93c56-rdw6tp-hero.overlay.json"+  ],+  "component": {+    "mpn": "M93C56-RDW6TP",+    "manufacturer": "STMicroelectronics",+    "package": "TSSOP-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "EEPROM",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589828441756635136",+    "parts": {+      "symbol": "m93c56-rdw6tp.kicad_sym",+      "footprint": "m93c56-rdw6tp.kicad_mod",+      "model_3d": "m93c56-rdw6tp-hero.glb",+      "model_3d_plain": "m93c56-rdw6tp.glb",+      "model_3d_step": "m93c56-rdw6tp-etched.step",+      "model_3d_step_plain": "m93c56-rdw6tp.step",+      "lbr": "m93c56-rdw6tp.lbr"+    },+    "distributor_links": {+      "lcsc": 2062199,+      "digikey": "M93C56-RDW6TP-ND",+      "mouser": "511-M93C56-RDW6TP"+    },+    "distributor_check": {+      "checked_at": "2026-10-03T02:06:30Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "M93C56-RDW6TP-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "511-M93C56-RDW6TP",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "S",+        "type": "input",+        "description": "Chip Select input; must be driven to VSS during power-up (pull-down recommended) and must be brought low for at least tSLSH between consecutive instruction cycles."+      },+      {+        "number": "2",+        "name": "C",+        "type": "input",+        "description": "Serial Clock input; operates from DC up to 2 MHz and must be held low when Chip Select rises, with an external pull-down recommended if the bus master can go high impedance."+      },+      {+        "number": "3",+        "name": "D",+        "type": "input",+        "description": "Serial Data input, sampled on the rising edge of the Serial Clock for the start bit, op-code, address and data bits."+      },+      {+        "number": "4",+        "name": "Q",+        "type": "output",+        "description": "Serial Data output that shifts out read data on rising clock edges, shows READY/BUSY status (Q=0 busy, Q=1 ready) during write or erase cycles, and is high impedance when the device is deselected."+      },+      {+        "number": "5",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "6",+        "name": "ORG",+        "type": "input",+        "description": "Organization Select: x16 when left unconnected or tied to VCC, x8 when tied to VSS, and should be tied to VSS or VCC in standby for minimum power."+      },+      {+        "number": "7",+        "name": "DU",+        "type": "passive",+        "description": "Don't Use pin reserved for ST test sequences, which may be left unconnected or connected to VCC or VSS."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage of 1.8 V to 5.5 V for the M93Cx6-R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC and VSS pins."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin numbering sequence for TSSOP-8 assumes standard counterclockwise numbering starting from pin 1 a"+        ],+        "pages_sent": 18,+        "cost_usd": 0.3511,+        "at": "2026-10-03T02:06:10"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589828441756635136",+        "pages": 35,+        "sha256": "7b1f76e6c602697a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file