main
Ray
Initial commit: component/m24512-rmn6p
2b9c2f9
M24512-RMN6P
STMicroelectronics · EEPROM · SOP-8
M24512-RMN6P from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip enable input; compared with the least significant bit (b1) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |
| 2 | E1 | input | Chip enable input; compared with bit b2 of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |
| 3 | E2 | input | Chip enable input; compared with the most significant chip-enable bit (b3) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |
| 4 | VSS | power_in | Ground pin, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data input/output with an open-drain output stage that may be wire-OR'ed with other open-drain/open-collector signals; requires an external pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input used to strobe data on SDA(in) and to output data on SDA(out); compatible with 100 kHz, 400 kHz and 1 MHz I2C bus modes. |
| 7 | WC | input | Write control input; when driven high, write operations to the entire memory array are disabled and data bytes are not acknowledged, while writes are enabled when WC is driven low or left floating. |
| 8 | VCC | power_in | Supply voltage input; for the M24512-R this must be a valid, stable voltage between 1.8 V and 5.5 V, decoupled with a 10 nF to 100 nF capacitor close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24512-RMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24512-rmn6p-etched.step/m24512-rmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24512-rmn6p.step/m24512-rmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (47 pp, sha256
d69a49224f5d9590, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M24512-RMN6P
**STMicroelectronics** · EEPROM · SOP-8
M24512-RMN6P from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip enable input; compared with the least significant bit (b1) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |
| 2 | E1 | input | Chip enable input; compared with bit b2 of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |
| 3 | E2 | input | Chip enable input; compared with the most significant chip-enable bit (b3) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |
| 4 | VSS | power_in | Ground pin, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data input/output with an open-drain output stage that may be wire-OR'ed with other open-drain/open-collector signals; requires an external pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input used to strobe data on SDA(in) and to output data on SDA(out); compatible with 100 kHz, 400 kHz and 1 MHz I2C bus modes. |
| 7 | WC | input | Write control input; when driven high, write operations to the entire memory array are disabled and data bytes are not acknowledged, while writes are enabled when WC is driven low or left floating. |
| 8 | VCC | power_in | Supply voltage input; for the M24512-R this must be a valid, stable voltage between 1.8 V and 5.5 V, decoupled with a 10 nF to 100 nF capacitor close to the VCC/VSS pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M24512-RMN6P`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `m24512-rmn6p-etched.step` / `m24512-rmn6p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m24512-rmn6p.step` / `m24512-rmn6p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922396841140224) (47 pp, sha256 `d69a49224f5d9590`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m24512-rmn6p-datasheet.pdf)