main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs m24512-rmn6p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers m24512-rmn6p: viewers · Ray
m24512-rmn6p-etched.fit.json m24512-rmn6p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
m24512-rmn6p-etched.glb m24512-rmn6p: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
m24512-rmn6p-etched.step m24512-rmn6p: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
m24512-rmn6p-hero.glb m24512-rmn6p: hero from the plain model · Ray
m24512-rmn6p-hero.overlay.json m24512-rmn6p: hero from the plain model · Ray
m24512-rmn6p.glb Publish 0.1.0 · Ray
m24512-rmn6p.kicad_mod Publish 0.1.0 · Ray
m24512-rmn6p.kicad_sym Publish 0.1.0 · Ray
m24512-rmn6p.lbr Publish 0.1.0 · Ray
m24512-rmn6p.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/m24512-rmn6p · Ray

M24512-RMN6P

STMicroelectronics · EEPROM · SOP-8

M24512-RMN6P from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Chip enable input; compared with the least significant bit (b1) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating.
2 E1 input Chip enable input; compared with bit b2 of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating.
3 E2 input Chip enable input; compared with the most significant chip-enable bit (b3) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating.
4 VSS power_in Ground pin, the reference for the VCC supply voltage.
5 SDA bidirectional Serial data input/output with an open-drain output stage that may be wire-OR'ed with other open-drain/open-collector signals; requires an external pull-up resistor to VCC.
6 SCL input Serial clock input used to strobe data on SDA(in) and to output data on SDA(out); compatible with 100 kHz, 400 kHz and 1 MHz I2C bus modes.
7 WC input Write control input; when driven high, write operations to the entire memory array are disabled and data bytes are not acknowledged, while writes are enabled when WC is driven low or left floating.
8 VCC power_in Supply voltage input; for the M24512-R this must be a valid, stable voltage between 1.8 V and 5.5 V, decoupled with a 10 nF to 100 nF capacitor close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOP-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: M24512-RMN6P
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: m24512-rmn6p-etched.step / m24512-rmn6p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24512-rmn6p.step / m24512-rmn6p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (47 pp, sha256 d69a49224f5d9590, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF