← Commit history

Initial commit: component/m24512-rmn6p

Ray ·2b9c2f9cf4 ·
2 files changed +187
README.mdadded+44
@@ -0,0 +1,44 @@+# M24512-RMN6P++**STMicroelectronics** · EEPROM · SOP-8++M24512-RMN6P from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E0 | input | Chip enable input; compared with the least significant bit (b1) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |+| 2 | E1 | input | Chip enable input; compared with bit b2 of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |+| 3 | E2 | input | Chip enable input; compared with the most significant chip-enable bit (b3) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating. |+| 4 | VSS | power_in | Ground pin, the reference for the VCC supply voltage. |+| 5 | SDA | bidirectional | Serial data input/output with an open-drain output stage that may be wire-OR'ed with other open-drain/open-collector signals; requires an external pull-up resistor to VCC. |+| 6 | SCL | input | Serial clock input used to strobe data on SDA(in) and to output data on SDA(out); compatible with 100 kHz, 400 kHz and 1 MHz I2C bus modes. |+| 7 | WC | input | Write control input; when driven high, write operations to the entire memory array are disabled and data bytes are not acknowledged, while writes are enabled when WC is driven low or left floating. |+| 8 | VCC | power_in | Supply voltage input; for the M24512-R this must be a valid, stable voltage between 1.8 V and 5.5 V, decoupled with a 10 nF to 100 nF capacitor close to the VCC/VSS pins. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M24512-RMN6P`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)+- 3D model files: `m24512-rmn6p-etched.step` / `m24512-rmn6p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m24512-rmn6p.step` / `m24512-rmn6p.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922396841140224) (47 pp, sha256 `d69a49224f5d9590`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m24512-rmn6p-datasheet.pdf)
page.jsonadded+143
@@ -0,0 +1,143 @@+{+  "slug": "m24512-rmn6p",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m24512-rmn6p",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m24512-rmn6p.kicad_sym",+    "m24512-rmn6p.kicad_mod",+    "m24512-rmn6p.glb",+    "m24512-rmn6p.step",+    "m24512-rmn6p.lbr",+    "docs/hero.png",+    "docs/m24512-rmn6p-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "M24512-RMN6P",+    "manufacturer": "STMicroelectronics",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "EEPROM",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922396841140224",+    "parts": {+      "symbol": "m24512-rmn6p.kicad_sym",+      "footprint": "m24512-rmn6p.kicad_mod",+      "model_3d": "m24512-rmn6p-etched.glb",+      "model_3d_plain": "m24512-rmn6p.glb",+      "model_3d_step": "m24512-rmn6p-etched.step",+      "model_3d_step_plain": "m24512-rmn6p.step",+      "lbr": "m24512-rmn6p.lbr"+    },+    "distributor_links": {+      "lcsc": "C1349691"+    },+    "pins": [+      {+        "number": "1",+        "name": "E0",+        "type": "input",+        "description": "Chip enable input; compared with the least significant bit (b1) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating."+      },+      {+        "number": "2",+        "name": "E1",+        "type": "input",+        "description": "Chip enable input; compared with bit b2 of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating."+      },+      {+        "number": "3",+        "name": "E2",+        "type": "input",+        "description": "Chip enable input; compared with the most significant chip-enable bit (b3) of the 7-bit device select code, must be tied to VCC or VSS and is read as low (0) if left floating."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin, the reference for the VCC supply voltage."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data input/output with an open-drain output stage that may be wire-OR'ed with other open-drain/open-collector signals; requires an external pull-up resistor to VCC."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input used to strobe data on SDA(in) and to output data on SDA(out); compatible with 100 kHz, 400 kHz and 1 MHz I2C bus modes."+      },+      {+        "number": "7",+        "name": "WC",+        "type": "input",+        "description": "Write control input; when driven high, write operations to the entire memory array are disabled and data bytes are not acknowledged, while writes are enabled when WC is driven low or left floating."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input; for the M24512-R this must be a valid, stable voltage between 1.8 V and 5.5 V, decoupled with a 10 nF to 100 nF capacitor close to the VCC/VSS pins."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin assignments inferred from schematic-style Figure 2 rather than explicit pin assignment table; as"+        ],+        "pages_sent": 47,+        "cost_usd": 0.5007,+        "at": "2026-09-23T21:52:58"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922396841140224",+        "pages": 47,+        "sha256": "d69a49224f5d9590",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file