main
Ray Publish 0.1.0 8a671ad
{
  "slug": "ltc7819ruj",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, QFN-40(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "ltc7819ruj#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc7819ruj.kicad_sym",
    "ltc7819ruj.kicad_mod",
    "ltc7819ruj.glb",
    "ltc7819ruj.step",
    "ltc7819ruj.lbr",
    "docs/hero.png",
    "docs/ltc7819ruj-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc7819ruj-hero.glb",
    "ltc7819ruj-hero.overlay.json"
  ],
  "component": {
    "mpn": "LTC7819RUJ",
    "manufacturer": "Analog Devices",
    "package": "QFN-40(6x6)",
    "pin_count": 41,
    "category": "Power Management",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ltc7819.pdf",
    "parts": {
      "symbol": "ltc7819ruj.kicad_sym",
      "footprint": "ltc7819ruj.kicad_mod",
      "model_3d": "ltc7819ruj-hero.glb",
      "model_3d_plain": "ltc7819ruj.glb",
      "model_3d_step": "ltc7819ruj-etched.step",
      "model_3d_step_plain": "ltc7819ruj.step",
      "lbr": "ltc7819ruj.lbr"
    },
    "distributor_links": {
      "lcsc": "C3189449",
      "digikey": "505-LTC7819RUJ#TRPBFTR-ND",
      "mouser": "584-LTC7819RUJTRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T22:17:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC7819RUJ#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC7819RUJTRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MODE",
        "type": "input",
        "description": "Mode select input acting on all three channels: grounding it selects Burst Mode, tying it to INTVCC selects forced continuous mode, and a 100k resistor from it to INTVCC selects pulse-skipping; it is Burst Mode when floating because of an internal 100k pull-down."
      },
      {
        "number": "2",
        "name": "TRACK/SS1",
        "type": "input",
        "description": "Channel 1 external tracking and soft-start input, with a 12.5µA internal pull-up that charges an external capacitor to set the startup ramp (0.65ms per 10nF), and the EA− reference is the lesser of 0.8V or this pin's voltage."
      },
      {
        "number": "3",
        "name": "SENSE1-",
        "type": "input",
        "description": "Negative input to the channel 1 differential current comparator; when it is 3.2V or greater it supplies most of the sleep-mode quiescent current instead of VIN, and it supplies comparator current when above INTVCC."
      },
      {
        "number": "4",
        "name": "SENSE1+",
        "type": "input",
        "description": "Positive input to the channel 1 differential current comparator, where the ITH voltage and controlled offsets between SENSE− and SENSE+ set the current trip threshold in conjunction with RSENSE."
      },
      {
        "number": "5",
        "name": "VFB1",
        "type": "input",
        "description": "Channel 1 feedback input: when VPRG1 is floating, an external resistor divider from the output sets the regulated voltage; when VPRG1 is tied to GND or INTVCC, VFB1 is tied directly to the output."
      },
      {
        "number": "6",
        "name": "ITH1",
        "type": "passive",
        "description": "Channel 1 error amplifier output and regulator compensation point, where the control voltage sets the channel's current comparator trip point and compensation components are placed between ITH and ground."
      },
      {
        "number": "7",
        "name": "PGOOD2",
        "type": "output",
        "description": "Open-drain power good output for channel 2, pulled low when VFB2 is not within ±10% of its regulation point."
      },
      {
        "number": "8",
        "name": "RUN3",
        "type": "input",
        "description": "Run control input for channel 3: forcing it below 1.1V disables that channel's switching, and it can be tied to VIN for always-on operation."
      },
      {
        "number": "9",
        "name": "RUN2",
        "type": "input",
        "description": "Run control input for channel 2: forcing it below 1.1V disables that channel's switching, and forcing all three RUN pins below 0.7V shuts down the entire LTC7819 to about 1.5µA quiescent current."
      },
      {
        "number": "10",
        "name": "RUN1",
        "type": "input",
        "description": "Run control input for channel 1: forcing it below 1.1V disables that channel's switching, and forcing all three RUN pins below 0.7V shuts down the entire LTC7819 to about 1.5µA quiescent current."
      },
      {
        "number": "11",
        "name": "SENSE2–",
        "type": "input",
        "description": "Negative input to the channel 2 differential current comparator, which supplies comparator current when its voltage is above INTVCC."
      },
      {
        "number": "12",
        "name": "SENSE2+",
        "type": "input",
        "description": "Positive input to the channel 2 differential current comparator, where the ITH voltage and controlled offsets between SENSE− and SENSE+ set the current trip threshold in conjunction with RSENSE."
      },
      {
        "number": "13",
        "name": "VFB2",
        "type": "input",
        "description": "Channel 2 feedback input for an external resistor divider from the output; tying it to INTVCC configures channel 2 as a slave to channel 1 in a multi-phase single output application."
      },
      {
        "number": "14",
        "name": "ITH2",
        "type": "passive",
        "description": "Channel 2 error amplifier output and regulator compensation point, where the control voltage sets the channel's current comparator trip point and compensation components are placed between ITH and ground."
      },
      {
        "number": "15",
        "name": "TRACK/SS2",
        "type": "input",
        "description": "Channel 2 external tracking and soft-start input, with a 12.5µA internal pull-up that charges an external capacitor to set the startup ramp, and the EA− reference is the lesser of 0.8V or this pin's voltage."
      },
      {
        "number": "16",
        "name": "VPRG1",
        "type": "input",
        "description": "Channel 1 voltage programming pin: floating allows adjustable output through VFB1 to the 0.8V reference, while GND or INTVCC programs the output to 3.3V or 5V respectively with VFB1 connected directly to the output."
      },
      {
        "number": "17",
        "name": "PGOOD1",
        "type": "output",
        "description": "Open-drain power good output for channel 1, pulled low when VFB1 is not within ±10% of its regulation point."
      },
      {
        "number": "18",
        "name": "TG2",
        "type": "output",
        "description": "High-current gate drive for the channel 2 top N-channel MOSFET, a floating driver output with a voltage swing of INTVCC superimposed on the SW2 node."
      },
      {
        "number": "19",
        "name": "SW2",
        "type": "passive",
        "description": "Channel 2 switch node connection to the inductor."
      },
      {
        "number": "20",
        "name": "BOOST2",
        "type": "power_out",
        "description": "Bootstrapped supply for the channel 2 top-side floating driver, with a capacitor to SW2 and a Schottky diode from INTVCC; the swing runs from INTVCC to (VIN+INTVCC)."
      },
      {
        "number": "21",
        "name": "BG2",
        "type": "output",
        "description": "High-current gate drive for the channel 2 bottom N-channel MOSFET, swinging from ground to INTVCC."
      },
      {
        "number": "22",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Output of the internal 5.1V low dropout regulator that powers the drivers and control circuits, which must be decoupled to ground with a minimum of 4.7µF ceramic or tantalum capacitor."
      },
      {
        "number": "23",
        "name": "EXTVCC",
        "type": "power_in",
        "description": "External power input to an internal LDO connected to INTVCC that bypasses the VIN LDO when EXTVCC is higher than 4.7V; do not exceed 30V on this pin, and connect it to ground if the EXTVCC LDO is not used."
      },
      {
        "number": "24",
        "name": "VIN",
        "type": "power_in",
        "description": "Main bias input supply pin, with a bypass capacitor tied between this pin and ground."
      },
      {
        "number": "25",
        "name": "BG1",
        "type": "output",
        "description": "High-current gate drive for the channel 1 bottom N-channel MOSFET, swinging from ground to INTVCC."
      },
      {
        "number": "26",
        "name": "BOOST1",
        "type": "power_out",
        "description": "Bootstrapped supply for the channel 1 top-side floating driver, with a capacitor to SW1 and a Schottky diode from INTVCC; the swing runs from INTVCC to (VIN+INTVCC)."
      },
      {
        "number": "27",
        "name": "TG1",
        "type": "output",
        "description": "High-current gate drive for the channel 1 top N-channel MOSFET, a floating driver output with a voltage swing of INTVCC superimposed on the SW1 node."
      },
      {
        "number": "28",
        "name": "SW1",
        "type": "passive",
        "description": "Channel 1 switch node connection to the inductor."
      },
      {
        "number": "29",
        "name": "BG3",
        "type": "output",
        "description": "High-current gate drive for the channel 3 bottom N-channel MOSFET, swinging from ground to INTVCC."
      },
      {
        "number": "30",
        "name": "BOOST3",
        "type": "power_out",
        "description": "Bootstrapped supply for the channel 3 top-side floating driver, with a capacitor to SW3 and a Schottky diode from INTVCC; the swing runs from INTVCC to (VIN+INTVCC)."
      },
      {
        "number": "31",
        "name": "SW3",
        "type": "passive",
        "description": "Channel 3 switch node connection to the inductor."
      },
      {
        "number": "32",
        "name": "TG3",
        "type": "output",
        "description": "High-current gate drive for the channel 3 top N-channel MOSFET, a floating driver output with a voltage swing of INTVCC superimposed on the SW3 node."
      },
      {
        "number": "33",
        "name": "PGOOD3",
        "type": "output",
        "description": "Open-drain power good output for channel 3, pulled low when VFB3 is not within ±10% of its regulation point."
      },
      {
        "number": "34",
        "name": "PLLIN/SPREAD",
        "type": "input",
        "description": "External synchronization input and spread spectrum select: an applied external clock synchronizes the rising TG1 edge, while tying it to INTVCC enables spread spectrum dithering and tying it to ground disables spread spectrum when not synchronizing."
      },
      {
        "number": "35",
        "name": "TRACK/SS3",
        "type": "input",
        "description": "Channel 3 external tracking and soft-start input, with a 12.5µA internal pull-up that charges an external capacitor to set the startup ramp, and the EA− reference is the lesser of 0.8V or this pin's voltage."
      },
      {
        "number": "36",
        "name": "ITH3",
        "type": "passive",
        "description": "Channel 3 error amplifier output and regulator compensation point, where the control voltage sets the channel's current comparator trip point and compensation components are placed between ITH and ground."
      },
      {
        "number": "37",
        "name": "VFB3",
        "type": "input",
        "description": "Channel 3 feedback input for an external resistor divider from the output; tying it to INTVCC configures channel 3 as a slave to channel 1 in a multi-phase single output application."
      },
      {
        "number": "38",
        "name": "SENSE3+",
        "type": "input",
        "description": "Positive input to the channel 3 differential current comparator, where the ITH voltage and controlled offsets between SENSE− and SENSE+ set the current trip threshold in conjunction with RSENSE."
      },
      {
        "number": "39",
        "name": "SENSE3–",
        "type": "input",
        "description": "Negative input to the channel 3 differential current comparator, which supplies comparator current when its voltage is above INTVCC."
      },
      {
        "number": "40",
        "name": "FREQ",
        "type": "input",
        "description": "Frequency control pin for the internal oscillator: GND sets 380kHz, INTVCC sets 2.25MHz, a resistor to GND programs 100kHz to 3MHz, and the capacitance on this pin should be minimized."
      },
      {
        "number": "41",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that connects to the sources of the bottom N-channel MOSFETs and the negative terminals of decoupling capacitors, and must be soldered to PCB ground for rated electrical and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The page 2 pin-configuration diagram text is scrambled in extraction, so pin numbers were taken from; The datasheet does not give a pin type for each pin; these KiCad classes are judgment calls. PGOOD1/; The ordering part LTC7819RUJ#TRPBF is the non-automotive tape-and-reel version of the 40-lead 6x6 QF"
        ],
        "pages_sent": 36,
        "cost_usd": 0.0604,
        "at": "2026-11-12T22:17:00"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ltc7819.pdf",
        "pages": 36,
        "sha256": "31e56a534f080048",
        "source_tier": "mfr"
      },
      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.7,
        "height_basis": "datasheet A, nominal",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 41,
        "described": 41,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc7819ruj.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.02,
          6.02,
          0.7
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "58db7e3b39300a31618bf4b931ab0e559f195fba77460f6729e5096e5abab6a6",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc7819ruj-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.02,
          6.02,
          0.7
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e99d03f5fe571dc2cacb0af9f525f3559eb53c9432767a1a26cc7c8a9051f4ee",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "UJ40",
      "source_page": 35,
      "D": {
        "nom_mm": 6.0,
        "range_mm": [
          5.9,
          6.1
        ]
      },
      "E1": {
        "nom_mm": 6.0,
        "range_mm": [
          5.9,
          6.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.7,
        "range_mm": [
          0.65,
          0.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ltc7819ruj.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}