main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc7819ruj: viewers rendered from the public page · Ray
ltc7819ruj-etched.glb ltc7819ruj: factory component page (tier=mfr) · Ray
ltc7819ruj-etched.step ltc7819ruj: factory component page (tier=mfr) · Ray
ltc7819ruj-hero.glb ltc7819ruj: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc7819ruj-hero.overlay.json ltc7819ruj: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc7819ruj.glb Publish 0.1.0 · Ray
ltc7819ruj.kicad_mod Publish 0.1.0 · Ray
ltc7819ruj.kicad_sym Publish 0.1.0 · Ray
ltc7819ruj.lbr Publish 0.1.0 · Ray
ltc7819ruj.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 41 pins · Ray

LTC7819RUJ#TRPBF

Analog Devices · DC-DC Converters · QFN-40(6x6)

LTC7819RUJ#TRPBF from Analog Devices, in a QFN-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 MODE input Mode select input acting on all three channels: grounding it selects Burst Mode, tying it to INTVCC selects forced continuous mode, and a 100k resistor from it to INTVCC selects pulse-skipping; it is Burst Mode when floating because of an internal 100k pull-down.
2 TRACK/SS1 input Channel 1 external tracking and soft-start input, with a 12.5µA internal pull-up that charges an external capacitor to set the startup ramp (0.65ms per 10nF), and the EA− reference is the lesser of 0.8V or this pin's voltage.
3 SENSE1- input Negative input to the channel 1 differential current comparator; when it is 3.2V or greater it supplies most of the sleep-mode quiescent current instead of VIN, and it supplies comparator current when above INTVCC.
4 SENSE1+ input Positive input to the channel 1 differential current comparator, where the ITH voltage and controlled offsets between SENSE− and SENSE+ set the current trip threshold in conjunction with RSENSE.
5 VFB1 input Channel 1 feedback input: when VPRG1 is floating, an external resistor divider from the output sets the regulated voltage; when VPRG1 is tied to GND or INTVCC, VFB1 is tied directly to the output.
6 ITH1 passive Channel 1 error amplifier output and regulator compensation point, where the control voltage sets the channel's current comparator trip point and compensation components are placed between ITH and ground.
7 PGOOD2 output Open-drain power good output for channel 2, pulled low when VFB2 is not within ±10% of its regulation point.
8 RUN3 input Run control input for channel 3: forcing it below 1.1V disables that channel's switching, and it can be tied to VIN for always-on operation.
9 RUN2 input Run control input for channel 2: forcing it below 1.1V disables that channel's switching, and forcing all three RUN pins below 0.7V shuts down the entire LTC7819 to about 1.5µA quiescent current.
10 RUN1 input Run control input for channel 1: forcing it below 1.1V disables that channel's switching, and forcing all three RUN pins below 0.7V shuts down the entire LTC7819 to about 1.5µA quiescent current.
11 SENSE2- input Negative input to the channel 2 differential current comparator, which supplies comparator current when its voltage is above INTVCC.
12 SENSE2+ input Positive input to the channel 2 differential current comparator, where the ITH voltage and controlled offsets between SENSE− and SENSE+ set the current trip threshold in conjunction with RSENSE.
13 VFB2 input Channel 2 feedback input for an external resistor divider from the output; tying it to INTVCC configures channel 2 as a slave to channel 1 in a multi-phase single output application.
14 ITH2 passive Channel 2 error amplifier output and regulator compensation point, where the control voltage sets the channel's current comparator trip point and compensation components are placed between ITH and ground.
15 TRACK/SS2 input Channel 2 external tracking and soft-start input, with a 12.5µA internal pull-up that charges an external capacitor to set the startup ramp, and the EA− reference is the lesser of 0.8V or this pin's voltage.
16 VPRG1 input Channel 1 voltage programming pin: floating allows adjustable output through VFB1 to the 0.8V reference, while GND or INTVCC programs the output to 3.3V or 5V respectively with VFB1 connected directly to the output.
17 PGOOD1 output Open-drain power good output for channel 1, pulled low when VFB1 is not within ±10% of its regulation point.
18 TG2 output High-current gate drive for the channel 2 top N-channel MOSFET, a floating driver output with a voltage swing of INTVCC superimposed on the SW2 node.
19 SW2 passive Channel 2 switch node connection to the inductor.
20 BOOST2 power_out Bootstrapped supply for the channel 2 top-side floating driver, with a capacitor to SW2 and a Schottky diode from INTVCC; the swing runs from INTVCC to (VIN+INTVCC).
21 BG2 output High-current gate drive for the channel 2 bottom N-channel MOSFET, swinging from ground to INTVCC.
22 INTVCC power_out Output of the internal 5.1V low dropout regulator that powers the drivers and control circuits, which must be decoupled to ground with a minimum of 4.7µF ceramic or tantalum capacitor.
23 EXTVCC power_in External power input to an internal LDO connected to INTVCC that bypasses the VIN LDO when EXTVCC is higher than 4.7V; do not exceed 30V on this pin, and connect it to ground if the EXTVCC LDO is not used.
24 VIN power_in Main bias input supply pin, with a bypass capacitor tied between this pin and ground.
25 BG1 output High-current gate drive for the channel 1 bottom N-channel MOSFET, swinging from ground to INTVCC.
26 BOOST1 power_out Bootstrapped supply for the channel 1 top-side floating driver, with a capacitor to SW1 and a Schottky diode from INTVCC; the swing runs from INTVCC to (VIN+INTVCC).
27 TG1 output High-current gate drive for the channel 1 top N-channel MOSFET, a floating driver output with a voltage swing of INTVCC superimposed on the SW1 node.
28 SW1 passive Channel 1 switch node connection to the inductor.
29 BG3 output High-current gate drive for the channel 3 bottom N-channel MOSFET, swinging from ground to INTVCC.
30 BOOST3 power_out Bootstrapped supply for the channel 3 top-side floating driver, with a capacitor to SW3 and a Schottky diode from INTVCC; the swing runs from INTVCC to (VIN+INTVCC).
31 SW3 passive Channel 3 switch node connection to the inductor.
32 TG3 output High-current gate drive for the channel 3 top N-channel MOSFET, a floating driver output with a voltage swing of INTVCC superimposed on the SW3 node.
33 PGOOD3 output Open-drain power good output for channel 3, pulled low when VFB3 is not within ±10% of its regulation point.
34 PLLIN/SPREAD input External synchronization input and spread spectrum select: an applied external clock synchronizes the rising TG1 edge, while tying it to INTVCC enables spread spectrum dithering and tying it to ground disables spread spectrum when not synchronizing.
35 TRACK/SS3 input Channel 3 external tracking and soft-start input, with a 12.5µA internal pull-up that charges an external capacitor to set the startup ramp, and the EA− reference is the lesser of 0.8V or this pin's voltage.
36 ITH3 passive Channel 3 error amplifier output and regulator compensation point, where the control voltage sets the channel's current comparator trip point and compensation components are placed between ITH and ground.
37 VFB3 input Channel 3 feedback input for an external resistor divider from the output; tying it to INTVCC configures channel 3 as a slave to channel 1 in a multi-phase single output application.
38 SENSE3+ input Positive input to the channel 3 differential current comparator, where the ITH voltage and controlled offsets between SENSE− and SENSE+ set the current trip threshold in conjunction with RSENSE.
39 SENSE3- input Negative input to the channel 3 differential current comparator, which supplies comparator current when its voltage is above INTVCC.
40 FREQ input Frequency control pin for the internal oscillator: GND sets 380kHz, INTVCC sets 2.25MHz, a resistor to GND programs 100kHz to 3MHz, and the capacitance on this pin should be minimized.
41 GND power_in Exposed pad ground that connects to the sources of the bottom N-channel MOSFETs and the negative terminals of decoupling capacitors, and must be soldered to PCB ground for rated electrical and thermal performance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package QFN-40(6x6)
Category Power Management
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage (VIN) absolute maximum -0.3 40 V 2
BOOST1, BOOST2, BOOST3 voltage -0.3 46 V 2
Switch voltage (SW1, SW2, SW3) -5 40 V 2
RUN1, RUN2, RUN3 voltages -0.3 40 V 2
EXTVCC voltage -0.3 30 V 2
INTVCC voltage -0.3 6 V 2
(BOOST1-SW1), (BOOST2-SW2), (BOOST3-SW3) voltage -0.3 6 V 2
SENSE1+, SENSE1-, SENSE2+, SENSE2-, SENSE3+, SENSE3- voltages -0.3 40 V 2
TRACK/SS1,2,3 and VFB1,2,3 voltages -0.3 6 V 2
ITH1, ITH2, ITH3 voltages -0.3 2 V 2
MODE, PGOOD1, PGOOD2 voltages -0.3 6 V 2
PGOOD3, VPRG1 voltages -0.3 6 V 2
PLLIN/SPREAD, FREQ voltages -0.3 6 V 2
Operating junction temperature range (LTC7819R) -40 150 °C 2
Storage temperature range -65 150 °C 2
Maximum junction temperature (TJ) TJ 150 °C 2
VIN input supply operating range VIN 4.5 40 V 3
VOUT1,2,3 output voltage operating range VOUT1,2,3 0.8 40 V 3
VFB1,2,3 regulated adjustable output feedback voltage VFB1,2,3 0.788 0.8 0.812 V VIN = 4.5V to 40V, ITH1,2,3 Voltage = 0.6V to 1.2V, 0°C to 85°C 3
VFB1,2,3 regulated adjustable output feedback voltage (second row) VFB1,2,3 0.792 0.8 0.808 V VIN = 4.5V to 40V, ITH1,2,3 Voltage = 0.6V to 1.2V 3
VFB1 regulated fixed output feedback voltage (VPRG1 = 0V, 3.3V) VFB1 3.23 3.3 3.37 V VIN = 4.5V to 40V, ITH1 Voltage = 0.6V to 1.2V, VPRG1 = 0V 3
VFB1 regulated fixed output feedback voltage (VPRG1 = INTVCC, 5V) VFB1 4.9 5 5.1 V VIN = 4.5V to 40V, ITH1 Voltage = 0.6V to 1.2V, VPRG1 = INTVCC 3
Feedback current (channels 2 and 3) -50 5 50 nA 3
Feedback current (channel 1), VPRG1 = FLOAT -50 5 50 nA VPRG1 = FLOAT 3
Feedback overvoltage protection threshold 7 10 13 % Measured at VFB1,2,3 relative to regulated VFB1,2,3 3
Maximum current sense threshold VSENSE(MAX) VSENSE(MAX) 45 50 55 mV VFB1,2,3 = 0.7V, VSENSE1,2,3- = 3.3V 3
Matching between channels -3.5 0 3.5 mV VSENSE1,2,3- = 3.3V 3
ISENSE1,2,3+ pin current ISENSE1,2,3+ -1 1 µA VSENSE1,2,3+ = 3.3V 3
Soft-start charge current 10 12.5 15 µA VTRACK/SS1,2,3 = 0V 3
RUN pin ON threshold VRUN1,2,3 1.15 1.2 1.25 V VRUN1,2,3 rising 3
VIN sleep mode current, one channel on 15 24 µA VSENSE1- < 3.2V, EXTVCC = 0V, one channel on 3
VIN sleep mode current, all channels on 18 30 µA VSENSE1- < 3.2V, EXTVCC = 0V, all channels on 3
Sleep mode current, only channel 1 on: VIN current 5 9 µA VSENSE1- ≥ 3.2V, EXTVCC = 0V 3
Sleep mode current, only channel 1 on: VIN current 1 4 µA VSENSE1- ≥ 3.2V, EXTVCC ≥ 4.8V 3
Sleep mode current, only channel 1 on: EXTVCC current 5 10 µA VSENSE1- ≥ 3.2V, EXTVCC ≥ 4.8V 3
Sleep mode current, only channel 1 on: SENSE1- current 10 18 µA VSENSE1- ≥ 3.2V 3
Sleep mode current, all channels on: VIN current 1 4 µA VSENSE1- ≥ 3.2V, EXTVCC ≥ 4.8V 3
Sleep mode current, all channels on: EXTVCC current 8 14 µA VSENSE1- ≥ 3.2V, EXTVCC ≥ 4.8V 3
Sleep mode current, all channels on: SENSE1- current 16 26 µA VSENSE1- ≥ 3.2V, EXTVCC ≥ 4.8V 3
INTVCC regulation point 4.9 5.1 5.3 V 4
INTVCC load regulation (VIN ≥ 6V) 1.2 2 % ICC = 0mA to 100mA, VIN ≥ 6V 4
INTVCC load regulation (VEXTVCC ≥ 6V) 1.2 2 % ICC = 0mA to 100mA, VEXTVCC ≥ 6V 4
EXTVCC LDO switchover voltage 4.5 4.7 4.8 V EXTVCC rising 4
UVLO threshold, INTVCC rising 4.1 4.2 4.35 V INTVCC rising 4
UVLO threshold, INTVCC falling 3.75 3.9 4 V INTVCC falling 4
Low fixed oscillator frequency fOSC fOSC 330 380 430 kHz VFREQ = 0V, PLLIN/SPREAD = 0V 4
High fixed oscillator frequency fOSC fOSC 2 2.25 2.5 MHz VFREQ = INTVCC, PLLIN/SPREAD = 0V 4
Programmable oscillator frequency fOSC 450 500 550 kHz RFREQ = 75kΩ, PLLIN/SPREAD = 0V 4
Synchronizable frequency range 0.1 3 MHz PLLIN/SPREAD = external clock 4
PLLIN input high level 2.2 V 4
PLLIN input low level 0.5 V 4
Spread spectrum minimum frequency (relative to fOSC) 0 % PLLIN/SPREAD = INTVCC 4
Spread spectrum maximum frequency (relative to fOSC) 20 % PLLIN/SPREAD = INTVCC 4
PGOOD voltage low 0.2 0.4 V IPGOOD = 2mA 4
PGOOD leakage current -1 1 µA VPGOOD = 5V 4
PGOOD trip level, VFB rising 7 10 13 % VFB relative to set regulation point, VFB rising 4
PGOOD trip level, VFB falling -13 -10 -7 % VFB relative to set regulation point, VFB falling 4
Thermal resistance junction-to-ambient θJA (UJ package) θJA 33 °C/W 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LTC7819RUJ#TRPBF
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: QFN-40(6x6), generated on the KiCad land (body 6 x 6 mm, terminals on the pads, 0.7 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ltc7819ruj-etched.step / ltc7819ruj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc7819ruj.step / ltc7819ruj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (36 pp, sha256 31e56a534f080048, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF