main
Ray
Publish 0.1.0
7522bc4
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242
{
"slug": "ltc6915ign",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Instrumentation OpAmps, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"amplifiers",
"ltc6915ign#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ltc6915ign.kicad_sym",
"ltc6915ign.kicad_mod",
"ltc6915ign.glb",
"ltc6915ign.step",
"ltc6915ign.lbr",
"docs/hero.png",
"docs/ltc6915ign-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ltc6915ign-hero.glb",
"ltc6915ign-hero.overlay.json",
"ltc6915ign-etched.glb"
],
"component": {
"mpn": "LTC6915IGN",
"manufacturer": "Analog Devices",
"package": "SSOP-16-150mil",
"pin_count": 16,
"category": "Amplifiers",
"subcategory": "Instrumentation OpAmps",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/6915fb.pdf",
"parts": {
"symbol": "ltc6915ign.kicad_sym",
"footprint": "ltc6915ign.kicad_mod",
"model_3d": "ltc6915ign-hero.glb",
"model_3d_plain": "ltc6915ign-etched.glb",
"model_3d_step": "ltc6915ign-etched.step",
"model_3d_step_plain": "ltc6915ign.step",
"lbr": "ltc6915ign.lbr"
},
"distributor_links": {
"lcsc": "C689725",
"digikey": "LTC6915IGN#PBF-ND",
"mouser": "584-LTC6915IGN#PBF"
},
"distributor_check": {
"checked_at": "2026-11-11T05:58:49Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LTC6915IGN#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LTC6915IGN#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SHDN",
"type": "input",
"description": "Shutdown pin: the IC is shut down when SHDN is tied to V+, and an internal current source pulls it to V- when floating (GN package only)."
},
{
"number": "2",
"name": "IN–",
"type": "input",
"description": "Inverting analog input; differential input must satisfy V- ≤ (VIN+ - VIN-) + VREF ≤ V+ - 1.3V and each input must stay between V- and V+."
},
{
"number": "3",
"name": "IN+",
"type": "input",
"description": "Noninverting analog input; differential input must satisfy V- ≤ (VIN+ - VIN-) + VREF ≤ V+ - 1.3V and each input must stay between V- and V+."
},
{
"number": "4",
"name": "V–",
"type": "power_in",
"description": "Negative supply pin (connect to the analog ground plane in single-supply operation)."
},
{
"number": "5",
"name": "HOLD_THRU",
"type": "input",
"description": "TTL-level input for parallel control mode: when high, the parallel gain code is latched into an internal D-latch and later changes on D3-D0 do not affect the gain."
},
{
"number": "6",
"name": "CS(D0)",
"type": "input",
"description": "TTL-level input: in serial mode it is the active-low chip select, and in parallel mode it is the LSB of the gain control code."
},
{
"number": "7",
"name": "DIN(D1)",
"type": "input",
"description": "TTL-level input: in serial mode it is the serial data input, and in parallel mode it is the second LSB of the gain control code."
},
{
"number": "8",
"name": "CLK(D2)",
"type": "input",
"description": "TTL-level input: in serial mode it is the serial interface clock, and in parallel mode it is the third LSB of the gain control code."
},
{
"number": "9",
"name": "DOUT(D3)",
"type": "bidirectional",
"description": "Serial data output in serial mode (always active, never tri-stated); MSB input of the 4-bit gain code in parallel mode, where the voltage must not exceed V+ (Pin 12) or a series resistor limiting current to 5mA or less is required."
},
{
"number": "10",
"name": "DGND",
"type": "power_in",
"description": "Digital ground for the TTL-level digital interface pins."
},
{
"number": "11",
"name": "PARALLEL_SERIAL",
"type": "input",
"description": "Interface selection input: tied to V+ selects parallel gain control, and tied to V- selects the serial interface."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "No connection on the GN16 package; the datasheet pin-configuration drawing labels this pin NC and gives no function."
},
{
"number": "13",
"name": "REF",
"type": "input",
"description": "Voltage reference for the PGA output; the total resistance of any resistive divider setting VREF should be much less than 32k (5k or less) or a voltage reference should be used to limit VREF variation."
},
{
"number": "14",
"name": "SENSE",
"type": "input",
"description": "Sense pin (GN package only): tie it as close as possible to a low-resistance load to maintain gain accuracy when the OUT-to-load interconnect resistance is not negligible."
},
{
"number": "15",
"name": "OUT",
"type": "output",
"description": "Amplifier output with typical 1mA source/sink capability; load resistance should be 1k or greater for minimum gain error."
},
{
"number": "16",
"name": "V+",
"type": "power_in",
"description": "Positive supply pin; the operating supply range is 2.7V to ±5.5V and the total supply (V+ to V-) absolute maximum is 11V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin 12 is marked NC in the GN16 pin-configuration drawing and is not described in the Pin Functions ; The Pin Functions table lists DOUT(D3) as a 'TTL Level Input' while the Operation section calls it b; REF and SENSE have no explicit electrical type in the datasheet; input is an interpretation of their"
],
"pages_sent": 18,
"cost_usd": 0.1201,
"at": "2026-11-11T05:58:36"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/6915fb.pdf",
"pages": 18,
"sha256": "9af5531e89ff8a92",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ltc6915ign.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.85
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ltc6915ign-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.85
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "15731f1156430c6e32125867a0cf38c2efe941cde008adc9c2d01fed1635d30b",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}