main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc6915ign: viewers rendered from the public page · Ray
ltc6915ign-etched.glb Publish 0.1.0 · Ray
ltc6915ign-etched.step ltc6915ign: factory component page (tier=mfr) · Ray
ltc6915ign-hero.glb ltc6915ign: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc6915ign-hero.overlay.json Publish 0.1.0 · Ray
ltc6915ign.glb Publish 0.1.0 · Ray
ltc6915ign.kicad_mod Publish 0.1.0 · Ray
ltc6915ign.kicad_sym Publish 0.1.0 · Ray
ltc6915ign.lbr Publish 0.1.0 · Ray
ltc6915ign.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

LTC6915IGN#PBF

Analog Devices · Instrumentation OpAmps · SSOP-16-150mil

LTC6915IGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown pin: the IC is shut down when SHDN is tied to V+, and an internal current source pulls it to V- when floating (GN package only).
2 IN- input Inverting analog input; differential input must satisfy V- ≤ (VIN+ - VIN-) + VREF ≤ V+ - 1.3V and each input must stay between V- and V+.
3 IN+ input Noninverting analog input; differential input must satisfy V- ≤ (VIN+ - VIN-) + VREF ≤ V+ - 1.3V and each input must stay between V- and V+.
4 V- power_in Negative supply pin (connect to the analog ground plane in single-supply operation).
5 HOLD_THRU input TTL-level input for parallel control mode: when high, the parallel gain code is latched into an internal D-latch and later changes on D3-D0 do not affect the gain.
6 CS(D0) input TTL-level input: in serial mode it is the active-low chip select, and in parallel mode it is the LSB of the gain control code.
7 DIN(D1) input TTL-level input: in serial mode it is the serial data input, and in parallel mode it is the second LSB of the gain control code.
8 CLK(D2) input TTL-level input: in serial mode it is the serial interface clock, and in parallel mode it is the third LSB of the gain control code.
9 DOUT(D3) bidirectional Serial data output in serial mode (always active, never tri-stated); MSB input of the 4-bit gain code in parallel mode, where the voltage must not exceed V+ (Pin 12) or a series resistor limiting current to 5mA or less is required.
10 DGND power_in Digital ground for the TTL-level digital interface pins.
11 PARALLEL_SERIAL input Interface selection input: tied to V+ selects parallel gain control, and tied to V- selects the serial interface.
12 NC unconnected No connection on the GN16 package; the datasheet pin-configuration drawing labels this pin NC and gives no function.
13 REF input Voltage reference for the PGA output; the total resistance of any resistive divider setting VREF should be much less than 32k (5k or less) or a voltage reference should be used to limit VREF variation.
14 SENSE input Sense pin (GN package only): tie it as close as possible to a low-resistance load to maintain gain accuracy when the OUT-to-load interconnect resistance is not negligible.
15 OUT output Amplifier output with typical 1mA source/sink capability; load resistance should be 1k or greater for minimum gain error.
16 V+ power_in Positive supply pin; the operating supply range is 2.7V to ±5.5V and the total supply (V+ to V-) absolute maximum is 11V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Amplifiers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Total Supply Voltage (V+ to V-) 11 V 2
Input Current -10 10 mA 2
Operating Temperature Range -40 85 °C LTC6915I 2
Junction Temperature (GN Package) TJMAX 150 °C GN package 2
Storage Temperature (GN Package) -65 150 °C GN package 2
Lead Temperature (Soldering 10 sec) 300 °C 2
Gain Error -0.075 0 0.075 % V+ = 3V, V- = 0V, VREF = 200mV; AV = 1 (RL = 10k); l = full temperature range 3
Gain Error -0.5 0 0.5 % V+ = 3V, V- = 0V, VREF = 200mV; AV = 2 to 32 (RL = 10k) 3
Gain Error -0.6 -0.1 0.6 % V+ = 3V, V- = 0V, VREF = 200mV; AV = 64 to 1024 (RL = 10k) 3
Gain Error -1 -0.2 1 % V+ = 3V, V- = 0V, VREF = 200mV; AV = 2048, 4096 (RL = 10k) 3
Gain Error -0.075 0 0.075 % V+ = 5V, V- = -5V, VREF = 0V; AV = 1 (RL = 10k) 4
Gain Error -0.5 0 0.5 % V+ = 5V, V- = -5V, VREF = 0V; AV = 2 to 32 (RL = 10k) 4
Gain Error -0.6 -0.1 0.6 % V+ = 5V, V- = -5V, VREF = 0V; AV = 64 to 1024 (RL = 10k) 4
Gain Error -1 -0.2 1 % V+ = 5V, V- = -5V, VREF = 0V; AV = 2048, 4096 (RL = 10k) 4
Input Offset Voltage VOS -10 -3 10 µV V+ = 3V, V- = 0V, VREF = 200mV; VCM = 200mV 3
Input Offset Voltage VOS -10 -3 10 µV V+ = 5V, V- = 0V, VREF = 200mV; VCM = 200mV 4
Input Offset Voltage VOS -20 5 20 µV V+ = 5V, V- = -5V, VREF = 0V; VCM = 0mV 4
Average Input Offset Drift -50 50 nV/°C V+ = 3V, V- = 0V, VREF = 200mV; TA = -40°C to 85°C 3
Average Input Offset Drift -50 50 nV/°C V+ = 5V, V- = 0V, VREF = 200mV; TA = -40°C to 85°C 4
Average Input Bias Current IB 5 10 nA V+ = 3V, V- = 0V, VREF = 200mV; VCM = 1.2V 3
Average Input Bias Current 5 10 nA V+ = 5V, V- = 0V, VREF = 200mV; VCM = 1.2V 4
Average Input Bias Current IOS 4 10 nA V+ = 5V, V- = -5V, VREF = 0V; VCM = 1V 4
Common Mode Rejection Ratio CMRR 100 dB V+ = 3V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0.1V to 2.9V, LTC6915I 3
Common Mode Rejection Ratio CMRR 95 dB V+ = 3V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0V to 3V, LTC6915I 3
Common Mode Rejection Ratio CMRR 105 dB V+ = 5V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0.1V to 4.9V, LTC6915I 4
Common Mode Rejection Ratio CMRR 95 dB V+ = 5V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0V to 5V, LTC6915I 4
Common Mode Rejection Ratio CMRR 105 dB V+ = 5V, V- = -5V, VREF = 0V; AV = 1024, VCM = -4.9V to 4.9V, LTC6915I 5
Common Mode Rejection Ratio CMRR 100 dB V+ = 5V, V- = -5V, VREF = 0V; AV = 1024, VCM = -5V to 5V, LTC6915I 5
Power Supply Rejection Ratio PSRR 110 116 dB VS = 2.7V to 6V 3
Power Supply Rejection Ratio PSRR 110 116 dB VS = 2.7V to 6V 4
Power Supply Rejection Ratio PSRR 110 116 dB VS = 2.7V to 11V 5
Output Voltage Swing High (Referenced to V-) 2.95 2.98 V V+ = 3V, V- = 0V; sourcing 200µA 3
Output Voltage Swing High (Referenced to V-) 2.75 2.87 V V+ = 3V, V- = 0V; sourcing 2mA 3
Output Voltage Swing High 4.95 4.99 V V+ = 5V, V- = 0V; sourcing 200µA 4
Output Voltage Swing High 4.8 4.93 V V+ = 5V, V- = 0V; sourcing 2mA 4
Output Voltage Swing High 4.97 4.99 V V+ = 5V, V- = -5V; sourcing 200µA 5
Output Voltage Swing High 4.9 4.96 V V+ = 5V, V- = -5V; sourcing 2mA 5
Supply Current, Parallel Mode 0.88 1.3 mA V+ = 3V, V- = 0V; no load at OUT, VCM = 200mV 3
Supply Current, Parallel Mode 0.95 1.48 mA V+ = 5V, V- = 0V; no load at OUT, VCM = 200mV 4
Supply Current, Parallel Mode 1.1 1.6 mA V+ = 5V, V- = -5V; no load, VCM = 0mV 5
Supply Current, Serial Mode 1.1 1.65 mA V+ = 3V, V- = 0V; no load at OUT, CL = 15pF, CLK 4MHz, CS = LOW, gain code 0001 3
Supply Current, Serial Mode 1.4 2 mA V+ = 5V, V- = 0V; no load at OUT, CL = 15pF, CLK 4MHz, CS = LOW, gain code 0001 4
Supply Current, Serial Mode 1.73 2.48 mA V+ = 5V, V- = -5V; no load at OUT, CL = 15pF, CLK 4MHz, CS = LOW, gain code 0001 5
Supply Current, Shutdown (Software) 125 180 µA V+ = 3V, V- = 0V; VSHDN = 1V, gain control code 0000 3
Supply Current, Shutdown (Software) 135 200 µA V+ = 5V, V- = 0V; VSHDN = 1V, gain control code 0000 4
Supply Current, Shutdown (Software) 25 240 µA V+ = 5V, V- = -5V; VSHDN = 1V, gain control code 0000 5
Digital Input Low Voltage VIL 0.8 V Digital I/O referenced to DGND 5
Thermal Resistance Junction-to-Ambient (GN Package) θJA 135 °C/W GN package 2

CAD (KiCad official)

  • Symbol: LTC6915IGN#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: ltc6915ign-etched.step / ltc6915ign-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6915ign.step / ltc6915ign.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 9af5531e89ff8a92, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF