3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC6915IGN#PBF
Analog Devices · Instrumentation OpAmps · SSOP-16-150mil
LTC6915IGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Shutdown pin: the IC is shut down when SHDN is tied to V+, and an internal current source pulls it to V- when floating (GN package only). |
| 2 | IN- | input | Inverting analog input; differential input must satisfy V- ≤ (VIN+ - VIN-) + VREF ≤ V+ - 1.3V and each input must stay between V- and V+. |
| 3 | IN+ | input | Noninverting analog input; differential input must satisfy V- ≤ (VIN+ - VIN-) + VREF ≤ V+ - 1.3V and each input must stay between V- and V+. |
| 4 | V- | power_in | Negative supply pin (connect to the analog ground plane in single-supply operation). |
| 5 | HOLD_THRU | input | TTL-level input for parallel control mode: when high, the parallel gain code is latched into an internal D-latch and later changes on D3-D0 do not affect the gain. |
| 6 | CS(D0) | input | TTL-level input: in serial mode it is the active-low chip select, and in parallel mode it is the LSB of the gain control code. |
| 7 | DIN(D1) | input | TTL-level input: in serial mode it is the serial data input, and in parallel mode it is the second LSB of the gain control code. |
| 8 | CLK(D2) | input | TTL-level input: in serial mode it is the serial interface clock, and in parallel mode it is the third LSB of the gain control code. |
| 9 | DOUT(D3) | bidirectional | Serial data output in serial mode (always active, never tri-stated); MSB input of the 4-bit gain code in parallel mode, where the voltage must not exceed V+ (Pin 12) or a series resistor limiting current to 5mA or less is required. |
| 10 | DGND | power_in | Digital ground for the TTL-level digital interface pins. |
| 11 | PARALLEL_SERIAL | input | Interface selection input: tied to V+ selects parallel gain control, and tied to V- selects the serial interface. |
| 12 | NC | unconnected | No connection on the GN16 package; the datasheet pin-configuration drawing labels this pin NC and gives no function. |
| 13 | REF | input | Voltage reference for the PGA output; the total resistance of any resistive divider setting VREF should be much less than 32k (5k or less) or a voltage reference should be used to limit VREF variation. |
| 14 | SENSE | input | Sense pin (GN package only): tie it as close as possible to a low-resistance load to maintain gain accuracy when the OUT-to-load interconnect resistance is not negligible. |
| 15 | OUT | output | Amplifier output with typical 1mA source/sink capability; load resistance should be 1k or greater for minimum gain error. |
| 16 | V+ | power_in | Positive supply pin; the operating supply range is 2.7V to ±5.5V and the total supply (V+ to V-) absolute maximum is 11V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Amplifiers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Supply Voltage (V+ to V-) | 11 | V | 2 | ||||
| Input Current | -10 | 10 | mA | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | LTC6915I | 2 | ||
| Junction Temperature (GN Package) | TJMAX | 150 | °C | GN package | 2 | ||
| Storage Temperature (GN Package) | -65 | 150 | °C | GN package | 2 | ||
| Lead Temperature (Soldering 10 sec) | 300 | °C | 2 | ||||
| Gain Error | -0.075 | 0 | 0.075 | % | V+ = 3V, V- = 0V, VREF = 200mV; AV = 1 (RL = 10k); l = full temperature range | 3 | |
| Gain Error | -0.5 | 0 | 0.5 | % | V+ = 3V, V- = 0V, VREF = 200mV; AV = 2 to 32 (RL = 10k) | 3 | |
| Gain Error | -0.6 | -0.1 | 0.6 | % | V+ = 3V, V- = 0V, VREF = 200mV; AV = 64 to 1024 (RL = 10k) | 3 | |
| Gain Error | -1 | -0.2 | 1 | % | V+ = 3V, V- = 0V, VREF = 200mV; AV = 2048, 4096 (RL = 10k) | 3 | |
| Gain Error | -0.075 | 0 | 0.075 | % | V+ = 5V, V- = -5V, VREF = 0V; AV = 1 (RL = 10k) | 4 | |
| Gain Error | -0.5 | 0 | 0.5 | % | V+ = 5V, V- = -5V, VREF = 0V; AV = 2 to 32 (RL = 10k) | 4 | |
| Gain Error | -0.6 | -0.1 | 0.6 | % | V+ = 5V, V- = -5V, VREF = 0V; AV = 64 to 1024 (RL = 10k) | 4 | |
| Gain Error | -1 | -0.2 | 1 | % | V+ = 5V, V- = -5V, VREF = 0V; AV = 2048, 4096 (RL = 10k) | 4 | |
| Input Offset Voltage | VOS | -10 | -3 | 10 | µV | V+ = 3V, V- = 0V, VREF = 200mV; VCM = 200mV | 3 |
| Input Offset Voltage | VOS | -10 | -3 | 10 | µV | V+ = 5V, V- = 0V, VREF = 200mV; VCM = 200mV | 4 |
| Input Offset Voltage | VOS | -20 | 5 | 20 | µV | V+ = 5V, V- = -5V, VREF = 0V; VCM = 0mV | 4 |
| Average Input Offset Drift | -50 | 50 | nV/°C | V+ = 3V, V- = 0V, VREF = 200mV; TA = -40°C to 85°C | 3 | ||
| Average Input Offset Drift | -50 | 50 | nV/°C | V+ = 5V, V- = 0V, VREF = 200mV; TA = -40°C to 85°C | 4 | ||
| Average Input Bias Current | IB | 5 | 10 | nA | V+ = 3V, V- = 0V, VREF = 200mV; VCM = 1.2V | 3 | |
| Average Input Bias Current | 5 | 10 | nA | V+ = 5V, V- = 0V, VREF = 200mV; VCM = 1.2V | 4 | ||
| Average Input Bias Current | IOS | 4 | 10 | nA | V+ = 5V, V- = -5V, VREF = 0V; VCM = 1V | 4 | |
| Common Mode Rejection Ratio | CMRR | 100 | dB | V+ = 3V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0.1V to 2.9V, LTC6915I | 3 | ||
| Common Mode Rejection Ratio | CMRR | 95 | dB | V+ = 3V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0V to 3V, LTC6915I | 3 | ||
| Common Mode Rejection Ratio | CMRR | 105 | dB | V+ = 5V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0.1V to 4.9V, LTC6915I | 4 | ||
| Common Mode Rejection Ratio | CMRR | 95 | dB | V+ = 5V, V- = 0V, VREF = 200mV; AV = 1024, VCM = 0V to 5V, LTC6915I | 4 | ||
| Common Mode Rejection Ratio | CMRR | 105 | dB | V+ = 5V, V- = -5V, VREF = 0V; AV = 1024, VCM = -4.9V to 4.9V, LTC6915I | 5 | ||
| Common Mode Rejection Ratio | CMRR | 100 | dB | V+ = 5V, V- = -5V, VREF = 0V; AV = 1024, VCM = -5V to 5V, LTC6915I | 5 | ||
| Power Supply Rejection Ratio | PSRR | 110 | 116 | dB | VS = 2.7V to 6V | 3 | |
| Power Supply Rejection Ratio | PSRR | 110 | 116 | dB | VS = 2.7V to 6V | 4 | |
| Power Supply Rejection Ratio | PSRR | 110 | 116 | dB | VS = 2.7V to 11V | 5 | |
| Output Voltage Swing High (Referenced to V-) | 2.95 | 2.98 | V | V+ = 3V, V- = 0V; sourcing 200µA | 3 | ||
| Output Voltage Swing High (Referenced to V-) | 2.75 | 2.87 | V | V+ = 3V, V- = 0V; sourcing 2mA | 3 | ||
| Output Voltage Swing High | 4.95 | 4.99 | V | V+ = 5V, V- = 0V; sourcing 200µA | 4 | ||
| Output Voltage Swing High | 4.8 | 4.93 | V | V+ = 5V, V- = 0V; sourcing 2mA | 4 | ||
| Output Voltage Swing High | 4.97 | 4.99 | V | V+ = 5V, V- = -5V; sourcing 200µA | 5 | ||
| Output Voltage Swing High | 4.9 | 4.96 | V | V+ = 5V, V- = -5V; sourcing 2mA | 5 | ||
| Supply Current, Parallel Mode | 0.88 | 1.3 | mA | V+ = 3V, V- = 0V; no load at OUT, VCM = 200mV | 3 | ||
| Supply Current, Parallel Mode | 0.95 | 1.48 | mA | V+ = 5V, V- = 0V; no load at OUT, VCM = 200mV | 4 | ||
| Supply Current, Parallel Mode | 1.1 | 1.6 | mA | V+ = 5V, V- = -5V; no load, VCM = 0mV | 5 | ||
| Supply Current, Serial Mode | 1.1 | 1.65 | mA | V+ = 3V, V- = 0V; no load at OUT, CL = 15pF, CLK 4MHz, CS = LOW, gain code 0001 | 3 | ||
| Supply Current, Serial Mode | 1.4 | 2 | mA | V+ = 5V, V- = 0V; no load at OUT, CL = 15pF, CLK 4MHz, CS = LOW, gain code 0001 | 4 | ||
| Supply Current, Serial Mode | 1.73 | 2.48 | mA | V+ = 5V, V- = -5V; no load at OUT, CL = 15pF, CLK 4MHz, CS = LOW, gain code 0001 | 5 | ||
| Supply Current, Shutdown (Software) | 125 | 180 | µA | V+ = 3V, V- = 0V; VSHDN = 1V, gain control code 0000 | 3 | ||
| Supply Current, Shutdown (Software) | 135 | 200 | µA | V+ = 5V, V- = 0V; VSHDN = 1V, gain control code 0000 | 4 | ||
| Supply Current, Shutdown (Software) | 25 | 240 | µA | V+ = 5V, V- = -5V; VSHDN = 1V, gain control code 0000 | 5 | ||
| Digital Input Low Voltage | VIL | 0.8 | V | Digital I/O referenced to DGND | 5 | ||
| Thermal Resistance Junction-to-Ambient (GN Package) | θJA | 135 | °C/W | GN package | 2 |
CAD (KiCad official)
- Symbol:
LTC6915IGN#PBF - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ltc6915ign-etched.step/ltc6915ign-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6915ign.step/ltc6915ign.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
9af5531e89ff8a92, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).