main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc2804ign-1: viewers rendered from the public page · Ray
ltc2804ign-1-etched.glb ltc2804ign-1: factory component page (tier=mfr) · Ray
ltc2804ign-1-etched.step ltc2804ign-1: factory component page (tier=mfr) · Ray
ltc2804ign-1-hero.glb ltc2804ign-1: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc2804ign-1-hero.overlay.json ltc2804ign-1: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc2804ign-1.glb Publish 0.1.0 · Ray
ltc2804ign-1.kicad_mod Publish 0.1.0 · Ray
ltc2804ign-1.kicad_sym Publish 0.1.0 · Ray
ltc2804ign-1.lbr Publish 0.1.0 · Ray
ltc2804ign-1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

LTC2804IGN-1#PBF

Analog Devices · RS232 ICs · SSOP-16-150mil

LTC2804IGN-1#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R1IN input RS-232 receiver 1 input with an internal 5kΩ termination resistor, rated for -25V to 25V.
2 R2IN input RS-232 receiver 2 input with an internal 5kΩ termination resistor, rated for -25V to 25V.
3 T1OUT output RS-232 driver 1 output, rated for -15V to 15V and protected against shorts to ground or up to ±15V.
4 T2OUT output RS-232 driver 2 output, rated for -15V to 15V and protected against shorts to ground or up to ±15V.
5 VCC power_in Input supply, 1.8V to 5.5V; bypass to GND with a 1µF capacitor.
6 VDD power_out Generated positive supply for the RS-232 driver (7V nominal); connect a 1µF capacitor between VDD and GND.
7 SW output DC-DC switch pin; connect a 10µH inductor between SW and VCC.
8 GND power_in Ground reference for all supplies and signals.
9 VEE power_out Generated negative supply for the RS-232 driver (-6.3V); connect a 1µF capacitor between VEE and GND.
10 CAP passive Charge pump capacitor for the negative supply; connect a 220nF capacitor between CAP and SW.
11 ON/OFF input Transceiver enable referenced to VL; a logic low places the device in Shutdown with driver and receiver outputs high impedance.
12 VL power_in Logic supply, 1.8V to 5.5V, for receiver outputs, driver inputs and control inputs; bypass with 220nF if not tied to VCC.
13 T2IN input Driver 2 input referenced to VL.
14 T1IN input Driver 1 input referenced to VL.
15 R2OUT output Receiver 2 output referenced to VL, short-circuit protected to GND/VCC/VL and high impedance in Shutdown.
16 R1OUT output Receiver 1 output referenced to VL, short-circuit protected to GND/VCC/VL and high impedance in Shutdown.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Supply Current, Normal Mode ICC 2.3 10 mA Outputs Unloaded, Normal Mode (Note 3) 3
VCC Supply Current, Receivers Active Mode ICC 1 10 µA Outputs Unloaded, Receivers Active Mode 3
VL Supply Current, Normal Mode (LTC2803, LTC2804) IL 0.15 0.3 mA Outputs Unloaded, Normal Mode (LTC2803, LTC2804) 3
VL Supply Current, Receivers Active Mode IL 15 30 µA Receivers Active Mode 3
VL Supply Current, Shutdown Mode IL 1 10 µA Shutdown Mode 3
Driver Output Voltage Low VOLD -5.7 -5 V RL = 3kΩ 3
Driver Output Voltage High VOHD 5 6.2 V RL = 3kΩ 3
Driver Output Short Circuit Current IOSD -70 35 70 mA VL = VCC = 5.5V; VTOUT = 0V 3
Driver Power-Off Output Leakage Current IPOLD -10 0.1 10 µA VL = VCC = VDD = VEE = 0V; VTOUT = ±2V 3
Driver Output Leakage Current IOLD -10 0.1 10 µA Shutdown or Receivers Active or Drivers Disabled Modes, -15V ≤ VTOUT ≤ 15V 3
Receiver Input Threshold, Receivers Active Mode VIR 0.8 1.5 2.4 V Receivers Active Mode 3
Receiver Input Threshold, Input Low VILR 0.8 1.3 V Normal Mode, Input Low 3
Receiver Input Threshold, Input High VIHR 1.7 2.5 V Normal Mode, Input High 3
Receiver Input Hysteresis VHYSR 0.1 0.4 1 V Normal Mode 3
Receiver Output Voltage Low VOLR 0.2 0.4 V Output Low, IROUT = 1mA (Sinking) 3
Receiver Input Resistance RIN 3 5 7 kΩ -15V ≤ VRIN ≤ 15V 3
Receiver Output Short Circuit Current IOSR -50 25 50 mA VL = 5.5V; 0V ≤ VROUT ≤ VL 3
Logic Input Current IIN -1 1 µA 3
Maximum Data Rate, LTC2804 at 2.5nF 100 kbps RL = 3kΩ, CL = 2.5nF 4
Maximum Data Rate, LTC2804 at 1nF 250 kbps RL = 3kΩ, CL = 1nF 4
Maximum Data Rate, LTC2804 at 250pF 1000 kbps RL = 3kΩ, CL = 250pF 4
Driver Slew Rate, LTC2804 at 1.8V SR(D) 4 V/µs VCC = VL = 1.8V, RL = 3kΩ, CL = 2.5nF 4
Driver Slew Rate, LTC2804 at 5.5V SR(D) 150 V/µs VCC = VL = 5.5V, RL = 3kΩ, CL = 50pF 4
Driver Propagation Delay, LTC2804 tPHLD, tPLHD 0.2 0.5 µs RL = 3kΩ, CL = 50pF 4
Driver Skew, LTC2804 tSKEWD 50 ns RL = 3kΩ, CL = 50pF 4
Driver Output Enable Time tPZHD, tPZLD 0.6 2 µs PS = VL, MODE = ↑, RL = 3kΩ, CL = 50pF 4
Driver Output Disable Time tPHZD, tPLZD 0.3 2 µs PS = VL, MODE = ↓, RL = 3kΩ, CL = 50pF 4
Receiver Propagation Delay tPHLR, tPLHR 0.2 0.4 µs CL = 150pF 4
Receiver Skew tSKEWR 50 ns CL = 150pF 4
Receiver Rise or Fall Time tRR, tFR 60 200 ns CL = 150pF 4
Shutdown to Receiver Output Enable tPZHR, tPZLR 5 15 µs PS = MODE = ↑ or ON/OFF = ↑, RL = 1kΩ, CL = 150pF 4
Receiver Output Disable upon Shutdown tPHZR, tPLZR 0.15 0.3 µs PS = MODE = ↓ or ON/OFF = ↓, RL = 1kΩ, CL = 150pF 4
VDD/VEE Supply Rise Time 0.2 2 ms Notes 3 and 4 4
VCC Input Supply Voltage VCC 1.8 5.5 V Electrical characteristics range 3
VL Logic Supply Voltage VL 1.8 5.5 V Electrical characteristics range 3
Operating Temperature (LTC280XI grade) TA -40 85 °C I-grade (LTC280XI) 2
VCC Supply Voltage VCC -0.3 7 V 2
VL Supply Voltage VL -0.3 6.7 V 2
VDD Generated Supply Voltage VDD 7.5 V 2
VEE Generated Supply Voltage VEE -7.5 0.3 V 2
VDD to VEE Differential VDD, VEE 14 V 2
Switch Pin Voltage SW -0.3 V 2
Charge Pump Capacitor Pin Voltage CAP 0.3 V 2
Driver and Mode Input Voltage TIN, T1IN, T2IN, MODE -0.3 7 V 2
PS and ON/OFF Input Voltage PS, ON/OFF -0.3 V 2
Receiver Input Voltage RIN, R1IN, R2IN -25 25 V 2
Driver Output Voltage TOUT, T1OUT, T2OUT -15 15 V 2
Receiver Output Voltage ROUT, R1OUT, R2OUT -0.3 V 2
Storage Temperature Range TSTG -65 125 °C 2
Maximum Junction Temperature, GN Package TJMAX 125 °C GN16 SSOP 2
Thermal Resistance, Junction to Ambient, GN Package θJA 110 °C/W 4 Layer 2
Thermal Resistance, Junction to Case, GN Package θJC 40 °C/W 4 Layer 2

CAD (KiCad official)

  • Symbol: LTC2804IGN-1#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: ltc2804ign-1-etched.step / ltc2804ign-1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2804ign-1.step / ltc2804ign-1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 e9ad4ef1183d2db6, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF