main
Ray Publish 0.1.0 5e34d3d
{
  "slug": "ltc2804ign-1",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices RS232 ICs, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "ltc2804ign-1#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc2804ign-1.kicad_sym",
    "ltc2804ign-1.kicad_mod",
    "ltc2804ign-1.glb",
    "ltc2804ign-1.step",
    "ltc2804ign-1.lbr",
    "docs/hero.png",
    "docs/ltc2804ign-1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc2804ign-1-hero.glb",
    "ltc2804ign-1-hero.overlay.json"
  ],
  "component": {
    "mpn": "LTC2804IGN-1",
    "manufacturer": "Analog Devices",
    "package": "SSOP-16-150mil",
    "pin_count": 16,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/2801234fe.pdf",
    "parts": {
      "symbol": "ltc2804ign-1.kicad_sym",
      "footprint": "ltc2804ign-1.kicad_mod",
      "model_3d": "ltc2804ign-1-hero.glb",
      "model_3d_plain": "ltc2804ign-1.glb",
      "model_3d_step": "ltc2804ign-1-etched.step",
      "model_3d_step_plain": "ltc2804ign-1.step",
      "lbr": "ltc2804ign-1.lbr"
    },
    "distributor_links": {
      "lcsc": "C580602",
      "digikey": "LTC2804IGN-1#PBF-ND",
      "mouser": "584-LTC2804IGN-1#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T09:57:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LTC2804IGN-1#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC2804IGN-1#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "R1IN",
        "type": "input",
        "description": "RS-232 receiver 1 input with an internal 5kΩ termination resistor, rated for -25V to 25V."
      },
      {
        "number": "2",
        "name": "R2IN",
        "type": "input",
        "description": "RS-232 receiver 2 input with an internal 5kΩ termination resistor, rated for -25V to 25V."
      },
      {
        "number": "3",
        "name": "T1OUT",
        "type": "output",
        "description": "RS-232 driver 1 output, rated for -15V to 15V and protected against shorts to ground or up to ±15V."
      },
      {
        "number": "4",
        "name": "T2OUT",
        "type": "output",
        "description": "RS-232 driver 2 output, rated for -15V to 15V and protected against shorts to ground or up to ±15V."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Input supply, 1.8V to 5.5V; bypass to GND with a 1µF capacitor."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_out",
        "description": "Generated positive supply for the RS-232 driver (7V nominal); connect a 1µF capacitor between VDD and GND."
      },
      {
        "number": "7",
        "name": "SW",
        "type": "output",
        "description": "DC-DC switch pin; connect a 10µH inductor between SW and VCC."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all supplies and signals."
      },
      {
        "number": "9",
        "name": "VEE",
        "type": "power_out",
        "description": "Generated negative supply for the RS-232 driver (-6.3V); connect a 1µF capacitor between VEE and GND."
      },
      {
        "number": "10",
        "name": "CAP",
        "type": "passive",
        "description": "Charge pump capacitor for the negative supply; connect a 220nF capacitor between CAP and SW."
      },
      {
        "number": "11",
        "name": "ON/OFF",
        "type": "input",
        "description": "Transceiver enable referenced to VL; a logic low places the device in Shutdown with driver and receiver outputs high impedance."
      },
      {
        "number": "12",
        "name": "VL",
        "type": "power_in",
        "description": "Logic supply, 1.8V to 5.5V, for receiver outputs, driver inputs and control inputs; bypass with 220nF if not tied to VCC."
      },
      {
        "number": "13",
        "name": "T2IN",
        "type": "input",
        "description": "Driver 2 input referenced to VL."
      },
      {
        "number": "14",
        "name": "T1IN",
        "type": "input",
        "description": "Driver 1 input referenced to VL."
      },
      {
        "number": "15",
        "name": "R2OUT",
        "type": "output",
        "description": "Receiver 2 output referenced to VL, short-circuit protected to GND/VCC/VL and high impedance in Shutdown."
      },
      {
        "number": "16",
        "name": "R1OUT",
        "type": "output",
        "description": "Receiver 1 output referenced to VL, short-circuit protected to GND/VCC/VL and high impedance in Shutdown."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet covers several variants and the pin-number columns in the Pin Functions table are merg; The LTC2804-1 SSOP has no PS or MODE pins; those functions are replaced by ON/OFF (pin 11). The type"
        ],
        "pages_sent": 4,
        "cost_usd": 0,
        "at": "2026-11-13T09:57:47"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/2801234fe.pdf",
        "pages": 18,
        "sha256": "e9ad4ef1183d2db6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc2804ign-1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc2804ign-1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "58b81afbeda0c39a555c665a43022df280b6b833f360c09b03e4d2f0d0d0173c",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}