main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8610aemse-trpbf: viewers · Ray
lt8610aemse-trpbf-etched.glb Publish 0.1.0 · Ray
lt8610aemse-trpbf-etched.step lt8610aemse-trpbf: factory component page (tier=mfr) · Ray
lt8610aemse-trpbf-hero.glb lt8610aemse-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8610aemse-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt8610aemse-trpbf.glb Publish 0.1.0 · Ray
lt8610aemse-trpbf.kicad_mod Publish 0.1.0 · Ray
lt8610aemse-trpbf.kicad_sym Publish 0.1.0 · Ray
lt8610aemse-trpbf.lbr Publish 0.1.0 · Ray
lt8610aemse-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT8610AEMSE#TRPBF

Analog Devices · DC-DC Converters · MSOP-16-EP

LT8610AEMSE#TRPBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SYNC input External clock synchronization input that must not float: ground it for low-ripple Burst Mode at light load, tie to a clock for synchronization, or apply 3V or higher or tie to INTVCC for pulse-skipping mode.
2 TR/SS passive Output tracking and soft-start pin where a voltage below 0.97V forces FB to follow it, and an internal 2.2µA pull-up from INTVCC with an external capacitor sets the output ramp rate.
3 RT passive A resistor from RT to ground sets the switching frequency, specified over 200kHz to 2.2MHz.
4 EN/UV input The part is shut down when this pin is low and enabled when high, with a hysteretic threshold of 1.00V rising and 0.96V falling; tie to VIN if unused.
5 VIN power_in Input supply pin for internal circuitry and the topside power switch, which must be tied together with pin 6 and locally bypassed; the input range is 3.4V to 42V.
6 VIN power_in Input supply pin for internal circuitry and the topside power switch, which must be tied together with pin 5 and locally bypassed; the input range is 3.4V to 42V.
7 NC unconnected No connect pin that is not connected to internal circuitry.
8 GND power_in Ground return for the internal bottom-side switch, which must be tied together with the exposed pad (pin 17).
9 SW output Switch node output of the internal power switches, which must be tied together with pins 10 and 11 and connected to the inductor and boost capacitor.
10 SW output Switch node output of the internal power switches, which must be tied together with pins 9 and 11 and connected to the inductor and boost capacitor.
11 SW output Switch node output of the internal power switches, which must be tied together with pins 9 and 10 and connected to the inductor and boost capacitor.
12 BST passive Provides a drive voltage above the input voltage to the topside power switch, using a 0.1µF boost capacitor placed as close as possible to the IC.
13 INTVCC power_out Internal 3.4V regulator bypass pin with a maximum output current of 20mA, decoupled to power ground with at least 1µF low ESR ceramic and not to be loaded externally.
14 BIAS power_in Supplies the internal regulator from BIAS instead of VIN when tied above 3.1V, and should be tied to VOUT for output voltages of 3.3V and above.
15 PG output Open-drain power-good output that remains low until FB is within ±9% of the final regulation voltage with no fault conditions, and is valid when VIN is above 3.4V.
16 FB input Feedback input that the part regulates to 0.970V on adjustable versions, where the feedback resistor divider tap connects and a phase lead capacitor of 4.7pF to 10pF goes to VOUT.
17 GND power_in Exposed pad ground that must be soldered to the PCB to lower the thermal resistance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-16-EP
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Reference Voltage (25°C row) VFB 0.964 0.97 0.976 V VIN = 6V, ILOAD = 0.5A 3
Feedback Reference Voltage (full operating temperature range) VFB 0.958 0.97 0.982 V VIN = 6V, ILOAD = 0.5A (l: full operating temperature range) 3
Feedback Voltage Line Regulation 0.004 0.02 %/V VIN = 4V to 42V, ILOAD = 1A (l: full operating temperature range) 3
Feedback Pin Input Current IFB -20 20 nA VFB = 1V 3
Minimum On-Time tON(MIN) 15 30 45 ns ILOAD = 1A, SYNC = 0V (l: full operating temperature range) 4
Oscillator Frequency fSW 180 210 240 kHz RT = 221k, ILOAD = 1A (l: full operating temperature range) 4
Oscillator Frequency fSW 665 700 735 kHz RT = 60.4k, ILOAD = 1A (l: full operating temperature range) 4
Oscillator Frequency fSW 1.85 2 2.15 MHz RT = 18.2k, ILOAD = 1A (l: full operating temperature range) 4
Top Power NMOS Current Limit (LT8610A) ILIM 5 6.7 8 A LT8610A (l: full operating temperature range) 4
Bottom Power NMOS Current Limit ILIM 3.4 4.3 5.4 A VINTVCC = 3.4V 4
SW Leakage Current ISW -1.5 1.5 µA VIN = 42V, VSW = 0V, 42V 4
INTVCC Undervoltage Lockout VINTVCC(UVLO) 2.5 2.6 2.7 V 4
EN/UV Pin Threshold VEN/UV 0.94 1 1.06 V EN/UV Rising (l: full operating temperature range) 4
EN/UV Pin Current IEN/UV -20 20 nA VEN/UV = 2V 4
PG Upper Threshold Offset from VFB 6 9 12 % VFB Falling (l: full operating temperature range) 4
PG Lower Threshold Offset from VFB -12 -9 -6 % VFB Rising (l: full operating temperature range) 4
PG Leakage IPG -40 40 nA VPG = 3.3V 4
SYNC Threshold (falling) VSYNC 0.8 1.1 1.4 V SYNC Falling 4
SYNC Threshold (rising) VSYNC 1.6 2 2.4 V SYNC Rising 4
SYNC Pin Current ISYNC -40 40 nA VSYNC = 6V 4
TR/SS Source Current ITR/SS 1 2 3.2 µA (l: full operating temperature range) 4
Operating Junction Temperature Range (LT8610AE) TJ -40 125 °C LT8610AE/LT8610ABE (Note 2) 2
VIN, EN/UV, PG Voltage VIN 42 V 2
BST Pin Above SW Pin VBST-SW 4 V 2
FB, TR/SS, RT, INTVCC Voltage 4 V 2
VOUT, SYNC Voltage VOUT, VSYNC 6 V 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance, Junction to Ambient θJA 40 °C/W 2
Thermal Resistance, Junction to Exposed Pad θJC(PAD) 10 °C/W 2

CAD (KiCad official)

  • Symbol: LT8610AEMSE#TRPBF
  • Footprint: Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
  • 3D model: MSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: lt8610aemse-trpbf-etched.step / lt8610aemse-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8610aemse-trpbf.step / lt8610aemse-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (26 pp, sha256 b37433c4b3415525, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF