main
Ray Publish 0.1.0 5ee9147
{
  "slug": "lt8610aemse-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt8610aemse#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt8610aemse-trpbf.kicad_sym",
    "lt8610aemse-trpbf.kicad_mod",
    "lt8610aemse-trpbf.glb",
    "lt8610aemse-trpbf.step",
    "lt8610aemse-trpbf.lbr",
    "docs/hero.png",
    "docs/lt8610aemse-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt8610aemse-trpbf-hero.glb",
    "lt8610aemse-trpbf-hero.overlay.json",
    "lt8610aemse-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT8610AEMSE#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-16-EP",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8610a-8610ab.pdf",
    "parts": {
      "symbol": "lt8610aemse-trpbf.kicad_sym",
      "footprint": "lt8610aemse-trpbf.kicad_mod",
      "model_3d": "lt8610aemse-trpbf-hero.glb",
      "model_3d_plain": "lt8610aemse-trpbf-etched.glb",
      "model_3d_step": "lt8610aemse-trpbf-etched.step",
      "model_3d_step_plain": "lt8610aemse-trpbf.step",
      "lbr": "lt8610aemse-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C674033",
      "digikey": "LT8610AEMSE#TRPBFTR-ND",
      "mouser": "584-LT8610AEMSETRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:36:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT8610AEMSE#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT8610AEMSETRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SYNC",
        "type": "input",
        "description": "External clock synchronization input that must not float: ground it for low-ripple Burst Mode at light load, tie to a clock for synchronization, or apply 3V or higher or tie to INTVCC for pulse-skipping mode."
      },
      {
        "number": "2",
        "name": "TR/SS",
        "type": "passive",
        "description": "Output tracking and soft-start pin where a voltage below 0.97V forces FB to follow it, and an internal 2.2µA pull-up from INTVCC with an external capacitor sets the output ramp rate."
      },
      {
        "number": "3",
        "name": "RT",
        "type": "passive",
        "description": "A resistor from RT to ground sets the switching frequency, specified over 200kHz to 2.2MHz."
      },
      {
        "number": "4",
        "name": "EN/UV",
        "type": "input",
        "description": "The part is shut down when this pin is low and enabled when high, with a hysteretic threshold of 1.00V rising and 0.96V falling; tie to VIN if unused."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin for internal circuitry and the topside power switch, which must be tied together with pin 6 and locally bypassed; the input range is 3.4V to 42V."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin for internal circuitry and the topside power switch, which must be tied together with pin 5 and locally bypassed; the input range is 3.4V to 42V."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect pin that is not connected to internal circuitry."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return for the internal bottom-side switch, which must be tied together with the exposed pad (pin 17)."
      },
      {
        "number": "9",
        "name": "SW",
        "type": "output",
        "description": "Switch node output of the internal power switches, which must be tied together with pins 10 and 11 and connected to the inductor and boost capacitor."
      },
      {
        "number": "10",
        "name": "SW",
        "type": "output",
        "description": "Switch node output of the internal power switches, which must be tied together with pins 9 and 11 and connected to the inductor and boost capacitor."
      },
      {
        "number": "11",
        "name": "SW",
        "type": "output",
        "description": "Switch node output of the internal power switches, which must be tied together with pins 9 and 10 and connected to the inductor and boost capacitor."
      },
      {
        "number": "12",
        "name": "BST",
        "type": "passive",
        "description": "Provides a drive voltage above the input voltage to the topside power switch, using a 0.1µF boost capacitor placed as close as possible to the IC."
      },
      {
        "number": "13",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Internal 3.4V regulator bypass pin with a maximum output current of 20mA, decoupled to power ground with at least 1µF low ESR ceramic and not to be loaded externally."
      },
      {
        "number": "14",
        "name": "BIAS",
        "type": "power_in",
        "description": "Supplies the internal regulator from BIAS instead of VIN when tied above 3.1V, and should be tied to VOUT for output voltages of 3.3V and above."
      },
      {
        "number": "15",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that remains low until FB is within ±9% of the final regulation voltage with no fault conditions, and is valid when VIN is above 3.4V."
      },
      {
        "number": "16",
        "name": "FB",
        "type": "input",
        "description": "Feedback input that the part regulates to 0.970V on adjustable versions, where the feedback resistor divider tap connects and a phase lead capacitor of 4.7pF to 10pF goes to VOUT."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that must be soldered to the PCB to lower the thermal resistance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 7,
        "cost_usd": 0.0223,
        "at": "2026-10-28T15:36:30"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8610a-8610ab.pdf",
        "pages": 26,
        "sha256": "b37433c4b3415525",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt8610aemse-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          4.039,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt8610aemse-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          4.039,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07d914b799ca48f110ab2e3ece4ff7e5a79feb645c5bfad28c4fe7e7ecb793c5",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}