main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8390aiufd-trpbf: viewers · Ray
lt8390aiufd-trpbf-etched.glb Publish 0.1.0 · Ray
lt8390aiufd-trpbf-etched.step lt8390aiufd-trpbf: factory component page (tier=mfr) · Ray
lt8390aiufd-trpbf-hero.glb lt8390aiufd-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8390aiufd-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt8390aiufd-trpbf.glb Publish 0.1.0 · Ray
lt8390aiufd-trpbf.kicad_mod Publish 0.1.0 · Ray
lt8390aiufd-trpbf.kicad_sym Publish 0.1.0 · Ray
lt8390aiufd-trpbf.lbr Publish 0.1.0 · Ray
lt8390aiufd-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT8390AIUFD#TRPBF

Analog Devices · DC-DC Controllers · QFN-28-EP(4x5)

LT8390AIUFD#TRPBF from Analog Devices, in a QFN-28-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TG1 output Buck side top gate drive that swings from SW1 to BST1 to drive the buck side top N-channel MOSFET.
2 LSP input Positive terminal of the buck side inductor current sense resistor (RSENSE), which requires a Kelvin connection for accurate current sensing.
3 LSN input Negative terminal of the buck side inductor current sense resistor (RSENSE), which requires a Kelvin connection for accurate current sensing.
4 VIN power_in Input supply pin that sets buck, buck-boost or boost operation over a 4V to 60V range and must be bypassed with a minimum 1µF ceramic capacitor.
5 INTVCC power_out Internal 5V linear regulator output (4.85V to 5.15V at 20mA) supplied from VIN, which must be bypassed with a minimum 4.7µF ceramic capacitor.
6 EN/UVLO input Enable and undervoltage lockout pin that shuts the part down below 0.3V and enables normal operation above 1.233V.
7 TEST input Factory test pin that must be directly connected to ground for the part to operate properly.
8 LOADEN input Load switch enable input with a rising threshold of 1.3V to 1.5V that controls the high side PMOS load switch and must be tied to VREF or INTVCC if unused.
9 VREF power_out Voltage reference output providing an accurate 2V capable of supplying 1mA, which must be bypassed with a 0.47µF ceramic capacitor.
10 CTRL input Control input that programs the ISP/ISN current sense threshold, with 100mV full scale when tied to VREF and switching stopped when forced below 0.3V.
11 ISP input Positive terminal of the ISP/ISN current sense resistor (RIS), which requires a Kelvin connection for accurate current sensing.
12 ISN input Negative terminal of the ISP/ISN current sense resistor (RIS), which requires a Kelvin connection for accurate current sensing.
13 ISMON output Current sense monitor output that generates a voltage equal to ten times V(ISP-ISN) plus a 0.25V offset.
14 PGOOD output Power good open-drain output that is pulled low when FB is within ±10% of the final regulation voltage and requires an external pull-up resistor.
15 SS passive Soft-start timer pin with an internal 12.5µA pull-up, where a 22nF capacitor is recommended and a single resistor to VREF selects the short-circuit fault mode.
16 FB input Voltage loop feedback input that regulates VFB to 1.00V, with output short-circuit below 0.25V and overvoltage above 1.1V.
17 VC passive Error amplifier output that sets the inductor current comparator threshold and is compensated with an external RC network.
18 RT passive Switching frequency setting pin where a resistor from this pin to ground sets the internal oscillator from 600kHz to 2MHz.
19 SYNC/SPRD input Switching frequency synchronization or spread spectrum pin that uses the internal oscillator when grounded, accepts an external clock, or enables 25% triangle spread spectrum when tied to INTVCC.
20 LOADTG output High side PMOS load switch top gate drive, a buffered inverted LOADEN signal that swings from the higher of (VOUT-5V) and 1.2V up to VOUT, and is left unconnected if unused.
21 VOUT power_in Output supply pin that sets buck, buck-boost or boost operation over a 0V to 60V range, serves as the LOADTG rail, and must be bypassed with a minimum 1µF ceramic capacitor.
22 TG2 output Boost side top gate drive that swings from SW2 to BST2 to drive the boost side top N-channel MOSFET.
23 SW2 passive Boost side switch node that swings from a Schottky diode voltage drop below ground up to VOUT.
24 BST2 power_out Boost side bootstrap floating driver supply with an integrated Schottky diode from INTVCC, requiring an external bootstrap capacitor to SW2.
25 BG2 output Boost side bottom gate drive that swings from ground to INTVCC to drive the boost side bottom N-channel MOSFET.
26 BG1 output Buck side bottom gate drive that swings from ground to INTVCC to drive the buck side bottom N-channel MOSFET.
27 BST1 power_out Buck side bootstrap floating driver supply with an integrated Schottky diode from INTVCC, requiring an external bootstrap capacitor to SW1.
28 SW1 passive Buck side switch node that swings from a Schottky diode voltage drop below ground up to VIN.
29 GND power_in Exposed pad ground that must be soldered directly to the ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package QFN-28-EP(4x5)
Category Power Supply Chip
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Operating Voltage Range 4 60 V 4
VOUT Voltage Range 0 60 V 4
Operating Junction Temperature Range (LT8390AI) TJ -40 125 °C LT8390AI 2
VIN, EN/UVLO, VOUT, ISP, ISN voltage 60 V 2
ISP-ISN differential voltage -1 1 V 2
SW1, SW2, LSP, LSN voltage -6 60 V 2
INTVCC, (BST1-SW1), (BST2-SW2) voltage 6 V 2
(BST1-LSP), (BST1-LSN) voltage 6 V 2
FB, LOADEN, SYNC/SPRD, CTRL, PGOOD voltage 6 V 2
Storage Temperature Range -65 150 °C 2
Junction-to-ambient thermal resistance (UFD QFN) θJA 43 °C/W UFD package 2
Junction-to-case thermal resistance (UFD QFN) θJC 3.4 °C/W UFD package 2
INTVCC Regulation Voltage 4.85 5 5.15 V IINTVCC = 20mA 4
INTVCC Current Limit 110 145 190 mA VINTVCC = 4.5V 4
INTVCC Undervoltage Lockout Threshold 3.44 3.54 3.64 V Falling 4
VREF Regulation Voltage 1.97 2 2.03 V IVREF = 100µA 4
VREF Current Limit 2 2.5 3.2 mA VREF = 1.8V 4
VREF Undervoltage Lockout Threshold 1.78 1.84 1.9 V Falling 4
EN/UVLO Shutdown Threshold 0.3 0.6 1 V 4
EN/UVLO Enable Threshold 1.196 1.22 1.244 V Falling 4
CTRL Input Bias Current 0 20 50 nA VCTRL = 0.75V, Current Out of Pin 4
CTRL Latch-Off Threshold 285 300 315 mV Falling 4
LOADEN Threshold 1.3 1.4 1.5 V Rising 4
LOADTG On Voltage V(VOUT-LOADTG) 4.5 5 5.5 V VOUT = 12V 4
LOADTG Off Voltage V(VOUT-LOADTG) -0.1 0 0.1 V VOUT = 12V 4
Full Scale Current Regulation V(ISP-ISN) 97 100 103 mV VCTRL = 2V, VISP = 12V or 0V 5
1/10th Current Regulation V(ISP-ISN) 8 10 12 mV VCTRL = 0.35V, VISP = 12V or 0V 5
ISMON Monitor Output VISMON 1.2 1.25 1.3 V V(ISP-ISN) = 100mV, VISP = 12V/0V 5
ISP/ISN Input Common Mode Range 0 60 V 5
FB Regulation Voltage 0.985 1 1.015 V VC = 1.2V 5
VC Standby Leakage Current -10 0 10 nA VC = 1.2V, VLOADEN = 0V 5
Maximum Current Sense Threshold (Buck) V(LSP-LSN) 35 50 65 mV Buck, VFB = 0.8V 5
Maximum Current Sense Threshold (Boost) V(LSP-LSN) 40 50 60 mV Boost, VFB = 0.8V 5
FB Overvoltage Threshold (VFB) VFB 1.08 1.1 1.12 V Rising 5
FB Overvoltage Hysteresis 35 50 65 mV 5
FB Short Threshold (VFB) VFB 0.24 0.25 0.26 V Falling 5
PGOOD Upper Threshold 8 10 12 % Offset from VFB, Rising 5
PGOOD Lower Threshold -12 -10 -8 % Offset from VFB, Falling 5
SS Pull-Up Current 10 12.5 15 µA VFB = 0.4V, VSS = 0V 5
SS Pull-Down Current 1 1.25 1.5 µA VFB = 0.1V, VSS = 2V 5
Switching Frequency 645 685 725 kHz VSYNC/SPRD = 0V, RT = 226kΩ 6
Switching Frequency 1290 1360 1430 kHz VSYNC/SPRD = 0V, RT = 100kΩ 6
Switching Frequency 1900 2000 2100 kHz VSYNC/SPRD = 0V, RT = 59.0kΩ 6
SYNC Frequency 600 2100 kHz 6
Highest Spread Spectrum Above Oscillator Frequency 21 23 25 % VSYNC/SPRD = 5V 6
Buck-Boost to Boost Region Transition 0.73 0.75 0.77 (VIN/VOUT) 6
Boost to Buck-Boost Region Transition 0.83 0.85 0.87 (VIN/VOUT) 6
Buck to Buck-Boost Region Transition 1.23 1.25 1.27 (VIN/VOUT) 6
Buck-Boost to Buck Region Transition 1.31 1.33 1.35 (VIN/VOUT) 6
Peak-Buck to Peak-Boost Region Transition 0.96 0.98 1 (VIN/VOUT) 6
Peak-Boost to Peak-Buck Region Transition 1 1.02 1.04 (VIN/VOUT) 6

CAD (KiCad official)

  • Symbol: LT8390AIUFD#TRPBF
  • Footprint: Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
  • 3D model: QFN-28-EP(4x5) (KiCad packages3D, STEP)
  • 3D model files: lt8390aiufd-trpbf-etched.step / lt8390aiufd-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8390aiufd-trpbf.step / lt8390aiufd-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (32 pp, sha256 b3c86e61a1228fd3, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF