main
Ray Publish 0.1.0 219491d
{
  "slug": "lt8390aiufd-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Controllers, QFN-28-EP(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt8390aiufd#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt8390aiufd-trpbf.kicad_sym",
    "lt8390aiufd-trpbf.kicad_mod",
    "lt8390aiufd-trpbf.glb",
    "lt8390aiufd-trpbf.step",
    "lt8390aiufd-trpbf.lbr",
    "docs/hero.png",
    "docs/lt8390aiufd-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt8390aiufd-trpbf-hero.glb",
    "lt8390aiufd-trpbf-hero.overlay.json",
    "lt8390aiufd-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT8390AIUFD#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "QFN-28-EP(4x5)",
    "pin_count": 29,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8390a.pdf",
    "parts": {
      "symbol": "lt8390aiufd-trpbf.kicad_sym",
      "footprint": "lt8390aiufd-trpbf.kicad_mod",
      "model_3d": "lt8390aiufd-trpbf-hero.glb",
      "model_3d_plain": "lt8390aiufd-trpbf-etched.glb",
      "model_3d_step": "lt8390aiufd-trpbf-etched.step",
      "model_3d_step_plain": "lt8390aiufd-trpbf.step",
      "lbr": "lt8390aiufd-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C673800",
      "digikey": "505-LT8390AIUFD#TRPBFTR-ND",
      "mouser": "584-8390AIUFDTRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:40:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT8390AIUFD#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-8390AIUFDTRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TG1",
        "type": "output",
        "description": "Buck side top gate drive that swings from SW1 to BST1 to drive the buck side top N-channel MOSFET."
      },
      {
        "number": "2",
        "name": "LSP",
        "type": "input",
        "description": "Positive terminal of the buck side inductor current sense resistor (RSENSE), which requires a Kelvin connection for accurate current sensing."
      },
      {
        "number": "3",
        "name": "LSN",
        "type": "input",
        "description": "Negative terminal of the buck side inductor current sense resistor (RSENSE), which requires a Kelvin connection for accurate current sensing."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin that sets buck, buck-boost or boost operation over a 4V to 60V range and must be bypassed with a minimum 1µF ceramic capacitor."
      },
      {
        "number": "5",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Internal 5V linear regulator output (4.85V to 5.15V at 20mA) supplied from VIN, which must be bypassed with a minimum 4.7µF ceramic capacitor."
      },
      {
        "number": "6",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Enable and undervoltage lockout pin that shuts the part down below 0.3V and enables normal operation above 1.233V."
      },
      {
        "number": "7",
        "name": "TEST",
        "type": "input",
        "description": "Factory test pin that must be directly connected to ground for the part to operate properly."
      },
      {
        "number": "8",
        "name": "LOADEN",
        "type": "input",
        "description": "Load switch enable input with a rising threshold of 1.3V to 1.5V that controls the high side PMOS load switch and must be tied to VREF or INTVCC if unused."
      },
      {
        "number": "9",
        "name": "VREF",
        "type": "power_out",
        "description": "Voltage reference output providing an accurate 2V capable of supplying 1mA, which must be bypassed with a 0.47µF ceramic capacitor."
      },
      {
        "number": "10",
        "name": "CTRL",
        "type": "input",
        "description": "Control input that programs the ISP/ISN current sense threshold, with 100mV full scale when tied to VREF and switching stopped when forced below 0.3V."
      },
      {
        "number": "11",
        "name": "ISP",
        "type": "input",
        "description": "Positive terminal of the ISP/ISN current sense resistor (RIS), which requires a Kelvin connection for accurate current sensing."
      },
      {
        "number": "12",
        "name": "ISN",
        "type": "input",
        "description": "Negative terminal of the ISP/ISN current sense resistor (RIS), which requires a Kelvin connection for accurate current sensing."
      },
      {
        "number": "13",
        "name": "ISMON",
        "type": "output",
        "description": "Current sense monitor output that generates a voltage equal to ten times V(ISP-ISN) plus a 0.25V offset."
      },
      {
        "number": "14",
        "name": "PGOOD",
        "type": "output",
        "description": "Power good open-drain output that is pulled low when FB is within ±10% of the final regulation voltage and requires an external pull-up resistor."
      },
      {
        "number": "15",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start timer pin with an internal 12.5µA pull-up, where a 22nF capacitor is recommended and a single resistor to VREF selects the short-circuit fault mode."
      },
      {
        "number": "16",
        "name": "FB",
        "type": "input",
        "description": "Voltage loop feedback input that regulates VFB to 1.00V, with output short-circuit below 0.25V and overvoltage above 1.1V."
      },
      {
        "number": "17",
        "name": "VC",
        "type": "passive",
        "description": "Error amplifier output that sets the inductor current comparator threshold and is compensated with an external RC network."
      },
      {
        "number": "18",
        "name": "RT",
        "type": "passive",
        "description": "Switching frequency setting pin where a resistor from this pin to ground sets the internal oscillator from 600kHz to 2MHz."
      },
      {
        "number": "19",
        "name": "SYNC/SPRD",
        "type": "input",
        "description": "Switching frequency synchronization or spread spectrum pin that uses the internal oscillator when grounded, accepts an external clock, or enables 25% triangle spread spectrum when tied to INTVCC."
      },
      {
        "number": "20",
        "name": "LOADTG",
        "type": "output",
        "description": "High side PMOS load switch top gate drive, a buffered inverted LOADEN signal that swings from the higher of (VOUT-5V) and 1.2V up to VOUT, and is left unconnected if unused."
      },
      {
        "number": "21",
        "name": "VOUT",
        "type": "power_in",
        "description": "Output supply pin that sets buck, buck-boost or boost operation over a 0V to 60V range, serves as the LOADTG rail, and must be bypassed with a minimum 1µF ceramic capacitor."
      },
      {
        "number": "22",
        "name": "TG2",
        "type": "output",
        "description": "Boost side top gate drive that swings from SW2 to BST2 to drive the boost side top N-channel MOSFET."
      },
      {
        "number": "23",
        "name": "SW2",
        "type": "passive",
        "description": "Boost side switch node that swings from a Schottky diode voltage drop below ground up to VOUT."
      },
      {
        "number": "24",
        "name": "BST2",
        "type": "power_out",
        "description": "Boost side bootstrap floating driver supply with an integrated Schottky diode from INTVCC, requiring an external bootstrap capacitor to SW2."
      },
      {
        "number": "25",
        "name": "BG2",
        "type": "output",
        "description": "Boost side bottom gate drive that swings from ground to INTVCC to drive the boost side bottom N-channel MOSFET."
      },
      {
        "number": "26",
        "name": "BG1",
        "type": "output",
        "description": "Buck side bottom gate drive that swings from ground to INTVCC to drive the buck side bottom N-channel MOSFET."
      },
      {
        "number": "27",
        "name": "BST1",
        "type": "power_out",
        "description": "Buck side bootstrap floating driver supply with an integrated Schottky diode from INTVCC, requiring an external bootstrap capacitor to SW1."
      },
      {
        "number": "28",
        "name": "SW1",
        "type": "passive",
        "description": "Buck side switch node that swings from a Schottky diode voltage drop below ground up to VIN."
      },
      {
        "number": "29",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that must be soldered directly to the ground plane."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The QFN pin-configuration drawing on page 2 is garbled in the text layer, so the pin-number-to-name ",
          "15/29 pins cited to the wrong page (name found elsewhere): ['3:LSN@p11', '6:EN/UVLO@p11', '8:LOADEN@p11', '16:FB@p12']"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0349,
        "at": "2026-10-28T15:39:50"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8390a.pdf",
        "pages": 32,
        "sha256": "b3c86e61a1228fd3",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt8390aiufd-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "028686d522379f70cdcac54d7cbc05f7e8d72fe41515288068d2e2da8d27bc8d",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt8390aiufd-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "23bb178d81db75bf6b3860d7d312d2104378ae787ebce02c57ac82f87ba51083",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}