main
Ray Publish 0.1.0 ad9233b
{
  "slug": "lt3999emse-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3999emse#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3999emse-pbf.kicad_sym",
    "lt3999emse-pbf.kicad_mod",
    "lt3999emse-pbf.glb",
    "lt3999emse-pbf.step",
    "lt3999emse-pbf.lbr",
    "docs/hero.png",
    "docs/lt3999emse-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3999emse-pbf-hero.glb",
    "lt3999emse-pbf-hero.overlay.json",
    "lt3999emse-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3999EMSE#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3999fa.pdf",
    "parts": {
      "symbol": "lt3999emse-pbf.kicad_sym",
      "footprint": "lt3999emse-pbf.kicad_mod",
      "model_3d": "lt3999emse-pbf-hero.glb",
      "model_3d_plain": "lt3999emse-pbf-etched.glb",
      "model_3d_step": "lt3999emse-pbf-etched.step",
      "model_3d_step_plain": "lt3999emse-pbf.step",
      "lbr": "lt3999emse-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C580175",
      "digikey": "505-LT3999EMSE#PBF-ND",
      "mouser": "584-LT3999EMSE#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T01:12:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT3999EMSE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3999EMSE#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SWA",
        "type": "output",
        "description": "SWA is the open-collector node of power switch A that drives one outer terminal of the center-tapped transformer, rated -0.3V to 80V with a 1A current-limited switch, and should be kept short and wide."
      },
      {
        "number": "2",
        "name": "RBIAS",
        "type": "passive",
        "description": "RBIAS sets the bias current of power switches SWA and SWB and must be connected to a 49.9k resistor to GND."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "VIN is the main supply pin for the switch driver and internal regulator, with a minimum operating voltage of 2.7V and an absolute maximum of 60V, and needs a low-ESR capacitor of 4.7µF or greater."
      },
      {
        "number": "4",
        "name": "UVLO",
        "type": "input",
        "description": "UVLO has a precision 1.25V (typ) rising threshold with 125mV hysteresis that disables switching and enters low-current shutdown when low, with an absolute maximum of -0.3V to 60V, and may connect directly to VIN or to a resistor divider."
      },
      {
        "number": "5",
        "name": "OVLO/DC",
        "type": "input",
        "description": "OVLO/DC has a precision 1.25V (typ) rising overvoltage-lockout threshold with 125mV hysteresis that disables switching when exceeded, with an absolute maximum of -0.3V to 8V, and is tied to GND to disable the function or to a resistor divider to program the duty cycle."
      },
      {
        "number": "6",
        "name": "RDC",
        "type": "passive",
        "description": "RDC is the duty cycle control pin, where a resistor to ground sets the switch duty cycle, and it may be left floating or connected to OVLO/DC to disable the duty cycle function."
      },
      {
        "number": "7",
        "name": "RT",
        "type": "passive",
        "description": "RT is the switching-frequency setting pin, with the switching frequency programmable from 50kHz to 1MHz using resistor values from Table 1 (for example, 49.9kΩ gives 300kHz)."
      },
      {
        "number": "8",
        "name": "SYNC",
        "type": "input",
        "description": "SYNC synchronizes the oscillator to an external clock, with a 1.5V (typ) threshold, a 2V or greater square-wave drive recommended, an absolute maximum of 8V, and it must be connected to GND if unused."
      },
      {
        "number": "9",
        "name": "ILIM/SS",
        "type": "passive",
        "description": "ILIM/SS sets the cycle-by-cycle switch current limit through a resistor (RILIM) and the soft-start time through a capacitor (CSS) to ground, and it must be left floating to use the internal default current limit."
      },
      {
        "number": "10",
        "name": "SWB",
        "type": "output",
        "description": "SWB is the open-collector node of power switch B that drives the other outer terminal of the center-tapped transformer, rated -0.3V to 80V with a 1A current-limited switch, and should be kept short and wide."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "GND is the ground pin and the exposed pad of the package, which must be soldered directly to the ground plane."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 11 is the exposed pad, which the datasheet identifies as GND; it is listed as a single pin with "
        ],
        "pages_sent": 16,
        "cost_usd": 0.0806,
        "at": "2026-10-29T01:12:25"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3999fa.pdf",
        "pages": 16,
        "sha256": "54786508677d16b6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3999emse-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3999emse-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b22b284028c23477d3dccaca87541b2d409544ca2e34697c586153d63ca3a905",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "MSE",
      "source_page": 13,
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3999emse-pbf.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}