3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3999EMSE#PBF
Analog Devices · DC-DC Converters · MSOP-10-EP
LT3999EMSE#PBF from Analog Devices, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SWA | output | SWA is the open-collector node of power switch A that drives one outer terminal of the center-tapped transformer, rated -0.3V to 80V with a 1A current-limited switch, and should be kept short and wide. |
| 2 | RBIAS | passive | RBIAS sets the bias current of power switches SWA and SWB and must be connected to a 49.9k resistor to GND. |
| 3 | VIN | power_in | VIN is the main supply pin for the switch driver and internal regulator, with a minimum operating voltage of 2.7V and an absolute maximum of 60V, and needs a low-ESR capacitor of 4.7µF or greater. |
| 4 | UVLO | input | UVLO has a precision 1.25V (typ) rising threshold with 125mV hysteresis that disables switching and enters low-current shutdown when low, with an absolute maximum of -0.3V to 60V, and may connect directly to VIN or to a resistor divider. |
| 5 | OVLO/DC | input | OVLO/DC has a precision 1.25V (typ) rising overvoltage-lockout threshold with 125mV hysteresis that disables switching when exceeded, with an absolute maximum of -0.3V to 8V, and is tied to GND to disable the function or to a resistor divider to program the duty cycle. |
| 6 | RDC | passive | RDC is the duty cycle control pin, where a resistor to ground sets the switch duty cycle, and it may be left floating or connected to OVLO/DC to disable the duty cycle function. |
| 7 | RT | passive | RT is the switching-frequency setting pin, with the switching frequency programmable from 50kHz to 1MHz using resistor values from Table 1 (for example, 49.9kΩ gives 300kHz). |
| 8 | SYNC | input | SYNC synchronizes the oscillator to an external clock, with a 1.5V (typ) threshold, a 2V or greater square-wave drive recommended, an absolute maximum of 8V, and it must be connected to GND if unused. |
| 9 | ILIM/SS | passive | ILIM/SS sets the cycle-by-cycle switch current limit through a resistor (RILIM) and the soft-start time through a capacitor (CSS) to ground, and it must be left floating to use the internal default current limit. |
| 10 | SWB | output | SWB is the open-collector node of power switch B that drives the other outer terminal of the center-tapped transformer, rated -0.3V to 80V with a 1A current-limited switch, and should be kept short and wide. |
| 11 | GND | power_in | GND is the ground pin and the exposed pad of the package, which must be soldered directly to the ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-10-EP |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SWA, SWB voltage | -0.3 | 80 | V | 2 | |||
| VIN, UVLO voltage | -0.3 | 60 | V | 2 | |||
| OVLO/DC, SYNC voltage | -0.3 | 8 | V | 2 | |||
| Operating junction temperature range, LT3999E | -40 | 125 | °C | LT3999E (Note 2: guaranteed 0°C to 125°C; -40°C to 125°C by design/correlation) | 2 | ||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature (soldering, 10 sec), MSOP | 300 | °C | Soldering 10 sec | 2 | |||
| VIN Overvoltage Lockout | 36 | 40 | 42 | V | Internal, Rising; full operating temperature range (l) | 3 | |
| UVLO Threshold (Rising) | 1.15 | 1.25 | 1.35 | V | Full operating temperature range (l) | 3 | |
| OVLO/DC Threshold (Rising) | 1.15 | 1.25 | 1.35 | V | Full operating temperature range (l) | 3 | |
| VIN Shutdown Current | 0.1 | 1 | μA | VUVLO = 0.3V | 3 | ||
| UVLO Pin Current | 10 | 100 | nA | VUVLO = 1.25V | 3 | ||
| OVLO/DC Pin Current | 10 | 100 | nA | VOVLO/DC = 1.25V | 3 | ||
| Switch Current Limit Internal Default | 1 | 1.4 | 1.7 | A | Internal default; full operating temperature range (l) | 3 | |
| Switching Frequency | 280 | 300 | 320 | kHz | RT = 49.9k; full operating temperature range (l) | 3 | |
| Synchronization Frequency Range | 100 | 1000 | kHz | 3 | |||
| SWA and SWB Current Limit | 0.4 | 0.5 | 0.6 | A | RILIM/SS = 43.2k; full operating temperature range (l) | 3 | |
| Switching Frequency | 50 | kHz | RT = 316k | 3 | |||
| Switching Frequency | 1000 | kHz | RT = 12.1k | 3 | |||
| VIN Minimum Operating Voltage | 2.7 | V | Full operating temperature range (l) | 3 | |||
| VIN Supply Current | 4.3 | mA | Note 3: excludes switch drive currents | 3 | |||
| UVLO Hysteresis | 125 | mV | 3 | ||||
| OVLO/DC Hysteresis | 125 | mV | 3 | ||||
| Switch Saturation Voltage | 350 | mV | ISW = 1A | 3 | |||
| Non Overlap Time | 70 | ns | 3 | ||||
| Switch Base Drive Current | 35 | mA | ISW = 1A | 3 | |||
| SYNC Voltage Threshold | 1.5 | V | 3 | ||||
| SYNC Pin Input Resistance | 200 | kΩ | 3 | ||||
| ILIM/SS Pin Current | 10 | μA | 3 | ||||
| Thermal resistance, junction-to-ambient (MSE 10-lead MSOP) | θJA | 40 | °C/W | MSE package, exposed pad must be soldered to PCB; single value printed | 2 | ||
| Thermal resistance, junction-to-case (MSE 10-lead MSOP) | θJC | 10 | °C/W | MSE package; single value printed | 2 |
CAD (KiCad official)
- Symbol:
LT3999EMSE#PBF - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
lt3999emse-pbf-etched.step/lt3999emse-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3999emse-pbf.step/lt3999emse-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
54786508677d16b6, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).