main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3999emse-pbf: viewers · Ray
lt3999emse-pbf-etched.glb Publish 0.1.0 · Ray
lt3999emse-pbf-etched.step lt3999emse-pbf: factory component page (tier=mfr) · Ray
lt3999emse-pbf-hero.glb lt3999emse-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3999emse-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt3999emse-pbf.glb Publish 0.1.0 · Ray
lt3999emse-pbf.kicad_mod Publish 0.1.0 · Ray
lt3999emse-pbf.kicad_sym Publish 0.1.0 · Ray
lt3999emse-pbf.lbr Publish 0.1.0 · Ray
lt3999emse-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT3999EMSE#PBF

Analog Devices · DC-DC Converters · MSOP-10-EP

LT3999EMSE#PBF from Analog Devices, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SWA output SWA is the open-collector node of power switch A that drives one outer terminal of the center-tapped transformer, rated -0.3V to 80V with a 1A current-limited switch, and should be kept short and wide.
2 RBIAS passive RBIAS sets the bias current of power switches SWA and SWB and must be connected to a 49.9k resistor to GND.
3 VIN power_in VIN is the main supply pin for the switch driver and internal regulator, with a minimum operating voltage of 2.7V and an absolute maximum of 60V, and needs a low-ESR capacitor of 4.7µF or greater.
4 UVLO input UVLO has a precision 1.25V (typ) rising threshold with 125mV hysteresis that disables switching and enters low-current shutdown when low, with an absolute maximum of -0.3V to 60V, and may connect directly to VIN or to a resistor divider.
5 OVLO/DC input OVLO/DC has a precision 1.25V (typ) rising overvoltage-lockout threshold with 125mV hysteresis that disables switching when exceeded, with an absolute maximum of -0.3V to 8V, and is tied to GND to disable the function or to a resistor divider to program the duty cycle.
6 RDC passive RDC is the duty cycle control pin, where a resistor to ground sets the switch duty cycle, and it may be left floating or connected to OVLO/DC to disable the duty cycle function.
7 RT passive RT is the switching-frequency setting pin, with the switching frequency programmable from 50kHz to 1MHz using resistor values from Table 1 (for example, 49.9kΩ gives 300kHz).
8 SYNC input SYNC synchronizes the oscillator to an external clock, with a 1.5V (typ) threshold, a 2V or greater square-wave drive recommended, an absolute maximum of 8V, and it must be connected to GND if unused.
9 ILIM/SS passive ILIM/SS sets the cycle-by-cycle switch current limit through a resistor (RILIM) and the soft-start time through a capacitor (CSS) to ground, and it must be left floating to use the internal default current limit.
10 SWB output SWB is the open-collector node of power switch B that drives the other outer terminal of the center-tapped transformer, rated -0.3V to 80V with a 1A current-limited switch, and should be kept short and wide.
11 GND power_in GND is the ground pin and the exposed pad of the package, which must be soldered directly to the ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-10-EP
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SWA, SWB voltage -0.3 80 V 2
VIN, UVLO voltage -0.3 60 V 2
OVLO/DC, SYNC voltage -0.3 8 V 2
Operating junction temperature range, LT3999E -40 125 °C LT3999E (Note 2: guaranteed 0°C to 125°C; -40°C to 125°C by design/correlation) 2
Storage temperature range -65 150 °C 2
Lead temperature (soldering, 10 sec), MSOP 300 °C Soldering 10 sec 2
VIN Overvoltage Lockout 36 40 42 V Internal, Rising; full operating temperature range (l) 3
UVLO Threshold (Rising) 1.15 1.25 1.35 V Full operating temperature range (l) 3
OVLO/DC Threshold (Rising) 1.15 1.25 1.35 V Full operating temperature range (l) 3
VIN Shutdown Current 0.1 1 μA VUVLO = 0.3V 3
UVLO Pin Current 10 100 nA VUVLO = 1.25V 3
OVLO/DC Pin Current 10 100 nA VOVLO/DC = 1.25V 3
Switch Current Limit Internal Default 1 1.4 1.7 A Internal default; full operating temperature range (l) 3
Switching Frequency 280 300 320 kHz RT = 49.9k; full operating temperature range (l) 3
Synchronization Frequency Range 100 1000 kHz 3
SWA and SWB Current Limit 0.4 0.5 0.6 A RILIM/SS = 43.2k; full operating temperature range (l) 3
Switching Frequency 50 kHz RT = 316k 3
Switching Frequency 1000 kHz RT = 12.1k 3
VIN Minimum Operating Voltage 2.7 V Full operating temperature range (l) 3
VIN Supply Current 4.3 mA Note 3: excludes switch drive currents 3
UVLO Hysteresis 125 mV 3
OVLO/DC Hysteresis 125 mV 3
Switch Saturation Voltage 350 mV ISW = 1A 3
Non Overlap Time 70 ns 3
Switch Base Drive Current 35 mA ISW = 1A 3
SYNC Voltage Threshold 1.5 V 3
SYNC Pin Input Resistance 200 kΩ 3
ILIM/SS Pin Current 10 μA 3
Thermal resistance, junction-to-ambient (MSE 10-lead MSOP) θJA 40 °C/W MSE package, exposed pad must be soldered to PCB; single value printed 2
Thermal resistance, junction-to-case (MSE 10-lead MSOP) θJC 10 °C/W MSE package; single value printed 2

CAD (KiCad official)

  • Symbol: LT3999EMSE#PBF
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: lt3999emse-pbf-etched.step / lt3999emse-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3999emse-pbf.step / lt3999emse-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 54786508677d16b6, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF