main
Ray
Publish 0.1.0
ed9fe5c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248
{
"slug": "lt3761emse-pbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices LED Drivers, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"display modules - led drivers - display drivers",
"lt3761emse#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3761emse-pbf.kicad_sym",
"lt3761emse-pbf.kicad_mod",
"lt3761emse-pbf.glb",
"lt3761emse-pbf.step",
"lt3761emse-pbf.lbr",
"docs/hero.png",
"docs/lt3761emse-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3761emse-pbf-hero.glb",
"lt3761emse-pbf-hero.overlay.json",
"lt3761emse-pbf-etched.glb"
],
"component": {
"mpn": "LT3761EMSE#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-16-EP",
"pin_count": 17,
"category": "Display Modules / LED Drivers / Display Drivers",
"subcategory": "LED Drivers",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/37611fb.pdf",
"parts": {
"symbol": "lt3761emse-pbf.kicad_sym",
"footprint": "lt3761emse-pbf.kicad_mod",
"model_3d": "lt3761emse-pbf-hero.glb",
"model_3d_plain": "lt3761emse-pbf-etched.glb",
"model_3d_step": "lt3761emse-pbf-etched.step",
"model_3d_step_plain": "lt3761emse-pbf.step",
"lbr": "lt3761emse-pbf.lbr"
},
"distributor_links": {
"lcsc": "C117376",
"digikey": "505-LT3761EMSE#PBF-ND",
"mouser": "584-LT3761EMSE#PBF"
},
"distributor_check": {
"checked_at": "2026-10-28T16:41:47Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT3761EMSE#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3761EMSE#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PWMOUT",
"type": "output",
"description": "Buffered PWM signal driven from INTVCC for an LED load disconnect NMOS or level shift, toggling if FB exceeds VFB plus 60mV (typical)."
},
{
"number": "2",
"name": "FB",
"type": "input",
"description": "Voltage loop feedback regulated to 1.25V (nominal) that must not be left open and must be connected to GND if unused, with FB overvoltage threshold of VFB plus 60mV (typical)."
},
{
"number": "3",
"name": "ISN",
"type": "input",
"description": "Negative terminal connection of the current feedback resistor, with input bias current typically 20µA flowing into the pin when ISN is greater than INTVCC."
},
{
"number": "4",
"name": "ISP",
"type": "input",
"description": "Positive terminal connection of the current feedback resistor, where an ISP-ISN difference above 600mV (typical) triggers an overcurrent event that drives GATE and PWMOUT low."
},
{
"number": "5",
"name": "VC",
"type": "passive",
"description": "Transconductance error amplifier output that requires a capacitor to GND with a series resistor recommended for fast transient response, and is high impedance when PWM is low."
},
{
"number": "6",
"name": "CTRL",
"type": "input",
"description": "Current sense threshold adjustment input that must not be left open, with VISP-ISN reaching the full-scale 250mV for CTRL above 1.2V."
},
{
"number": "7",
"name": "VREF",
"type": "power_in",
"description": "Voltage reference output, typically 2V, that can supply up to 185µA (typical) to a resistor divider for the CTRL pin."
},
{
"number": "8",
"name": "PWM",
"type": "input",
"description": "PWM input where a signal low turns off the switcher, and which must be connected to INTVCC if not used, with a capacitor to GND invoking a self-driving oscillator."
},
{
"number": "9",
"name": "OPENLED",
"type": "output",
"description": "Open-drain pull-down output (LT3761 only) that asserts when FB is above VFB minus 50mV (typical) and ISP-ISN is below 25mV, and requires an external pull-up, usually to INTVCC."
},
{
"number": "10",
"name": "DIM/SS",
"type": "passive",
"description": "Soft-start and PWMOUT dimming signal generator programming pin with a 12µA (typical) internal pull-up and a capacitor to GND of minimum 560pF when the PWMOUT generator is used."
},
{
"number": "11",
"name": "RT",
"type": "passive",
"description": "Switching frequency adjustment pin set by a resistor to GND, which must not be left open and should be placed close to the IC."
},
{
"number": "12",
"name": "EN/UVLO",
"type": "input",
"description": "Enable and undervoltage detect pin with a 1.22V falling threshold and 1.24V (typical) rising enable threshold, which must be tied to 0.4V or less to disable the device."
},
{
"number": "13",
"name": "INTVCC",
"type": "power_out",
"description": "Current limited low dropout linear regulator output regulating to 7.85V (typical) from VIN, which must be bypassed with a 1µF ceramic capacitor placed close to the pin and exposed pad GND."
},
{
"number": "14",
"name": "VIN",
"type": "power_in",
"description": "Power supply input for internal loads and the INTVCC regulator, which must be locally bypassed with a 0.22µF (or larger) low ESR capacitor placed close to the pin."
},
{
"number": "15",
"name": "SENSE",
"type": "input",
"description": "Current sense input for the switch control loop that must be Kelvin connected to the positive terminal of the switch current sense resistor in the source of the external NFET."
},
{
"number": "16",
"name": "GATE",
"type": "output",
"description": "N-channel FET gate driver output that switches between INTVCC and GND and is driven to GND during shutdown, fault or idle states."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Exposed pad ground that must be soldered directly to the ground plane and also serves as the sense return for the switch current sense resistor."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN LT3761EMSE is the LT3761 (not -1) option, so pin 9 is OPENLED per the datasheet; the SYNC fu"
],
"pages_sent": 7,
"cost_usd": 0.0217,
"at": "2026-10-28T16:41:36"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/37611fb.pdf",
"pages": 32,
"sha256": "733340007eac0a67",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3761emse-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3761emse-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "91fd0c3143cc52142460e74b2e747a5f289953922fc0f9d6c5232a54d5961297",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}