main
Ray Publish 0.1.0 32d4c42
{
  "slug": "lt3680edd-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3680edd#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3680edd-trpbf.kicad_sym",
    "lt3680edd-trpbf.kicad_mod",
    "lt3680edd-trpbf.glb",
    "lt3680edd-trpbf.step",
    "lt3680edd-trpbf.lbr",
    "docs/hero.png",
    "docs/lt3680edd-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3680edd-trpbf-hero.glb",
    "lt3680edd-trpbf-hero.overlay.json",
    "lt3680edd-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3680EDD#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3680.pdf",
    "parts": {
      "symbol": "lt3680edd-trpbf.kicad_sym",
      "footprint": "lt3680edd-trpbf.kicad_mod",
      "model_3d": "lt3680edd-trpbf-hero.glb",
      "model_3d_plain": "lt3680edd-trpbf-etched.glb",
      "model_3d_step": "lt3680edd-trpbf-etched.step",
      "model_3d_step_plain": "lt3680edd-trpbf.step",
      "lbr": "lt3680edd-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C671175",
      "digikey": "LT3680EDD#TRPBFTR-ND",
      "mouser": "584-LT3680EDD#TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:46:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3680EDD#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3680EDD#TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BD",
        "type": "power_in",
        "description": "Connects to the anode of the boost Schottky diode and supplies current to the internal regulator; bias from BD is used when it is driven above 3V."
      },
      {
        "number": "2",
        "name": "BOOST",
        "type": "passive",
        "description": "Provides a drive voltage higher than the input voltage to the internal bipolar NPN power switch, with BOOST pin voltage limited to 30V above the SW pin."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "output",
        "description": "Output of the internal power switch; connect to the inductor, catch diode and boost capacitor."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Supplies current to the internal regulator and the internal power switch over the 3.6V to 36V input range, and must be locally bypassed."
      },
      {
        "number": "5",
        "name": "RUN/SS",
        "type": "input",
        "description": "Tie to ground to shut down the regulator, tie to 2.5V or more for normal operation, and absolute maximum is 36V; this pin also sets the soft-start ramp."
      },
      {
        "number": "6",
        "name": "SYNC",
        "type": "input",
        "description": "External clock synchronization input that should be grounded for Burst Mode operation at low loads, with clock edges faster than 1µs and never left floating."
      },
      {
        "number": "7",
        "name": "PG",
        "type": "output",
        "description": "Open-collector power good output that remains low until the FB pin is within 9% of the final regulation voltage, with absolute maximum of 30V."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Regulates to 0.790V; connect the feedback resistor divider tap to this pin, with absolute maximum of 5V."
      },
      {
        "number": "9",
        "name": "VC",
        "type": "passive",
        "description": "Output of the internal error amplifier that controls peak switch current; tie an RC compensation network from this pin to ground, and it is clamped at 2.0V."
      },
      {
        "number": "10",
        "name": "RT",
        "type": "passive",
        "description": "Oscillator resistor input; a resistor connected from this pin to ground sets the switching frequency."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad is ground and must be soldered to the PCB for thermal and electrical connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DD (3mm x 3mm DFN) pin diagram on page 2 is garbled in the text extraction. Pin numbers and name"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0149,
        "at": "2026-10-28T15:46:23"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3680.pdf",
        "pages": 24,
        "sha256": "6b5ca341795de2de",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3680edd-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3680edd-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5d445b153e738f5e765b33aee3fc0e4f18342fa8b1e52a3d074fc7183cca27b9",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}