main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3680edd-trpbf: viewers · Ray
lt3680edd-trpbf-etched.glb Publish 0.1.0 · Ray
lt3680edd-trpbf-etched.step lt3680edd-trpbf: factory component page (tier=mfr) · Ray
lt3680edd-trpbf-hero.glb lt3680edd-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3680edd-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt3680edd-trpbf.glb Publish 0.1.0 · Ray
lt3680edd-trpbf.kicad_mod Publish 0.1.0 · Ray
lt3680edd-trpbf.kicad_sym Publish 0.1.0 · Ray
lt3680edd-trpbf.lbr Publish 0.1.0 · Ray
lt3680edd-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT3680EDD#TRPBF

Analog Devices · DC-DC Converters · DFN-10-EP(3x3)

LT3680EDD#TRPBF from Analog Devices, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BD power_in Connects to the anode of the boost Schottky diode and supplies current to the internal regulator; bias from BD is used when it is driven above 3V.
2 BOOST passive Provides a drive voltage higher than the input voltage to the internal bipolar NPN power switch, with BOOST pin voltage limited to 30V above the SW pin.
3 SW output Output of the internal power switch; connect to the inductor, catch diode and boost capacitor.
4 VIN power_in Supplies current to the internal regulator and the internal power switch over the 3.6V to 36V input range, and must be locally bypassed.
5 RUN/SS input Tie to ground to shut down the regulator, tie to 2.5V or more for normal operation, and absolute maximum is 36V; this pin also sets the soft-start ramp.
6 SYNC input External clock synchronization input that should be grounded for Burst Mode operation at low loads, with clock edges faster than 1µs and never left floating.
7 PG output Open-collector power good output that remains low until the FB pin is within 9% of the final regulation voltage, with absolute maximum of 30V.
8 FB input Regulates to 0.790V; connect the feedback resistor divider tap to this pin, with absolute maximum of 5V.
9 VC passive Output of the internal error amplifier that controls peak switch current; tie an RC compensation network from this pin to ground, and it is clamped at 2.0V.
10 RT passive Oscillator resistor input; a resistor connected from this pin to ground sets the switching frequency.
11 GND power_in Exposed pad is ground and must be soldered to the PCB for thermal and electrical connection.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-10-EP(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Quiescent Current from VIN IQ 0.01 0.5 µA VRUN/SS = 0.2V 3
Quiescent Current from VIN IQ 30 65 µA VBD = 3V, Not Switching 3
Quiescent Current from VIN IQ 120 160 µA VBD = 0, Not Switching 3
Quiescent Current from BD IQ 0.01 0.5 µA VRUN/SS = 0.2V 3
Quiescent Current from BD IQ 90 130 µA VBD = 3V, Not Switching 3
Quiescent Current from BD IQ 1 5 µA VBD = 0, Not Switching 3
Feedback Voltage VFB 780 790 800 mV Over full operating temperature range (l) 3
Feedback Voltage VFB 775 790 805 mV 3
FB Pin Bias Current IFB 10 40 nA VFB = 0.8V, VC = 0.4V 3
FB Voltage Line Regulation 0.002 0.01 %/V 4V < VIN < 36V 3
Switching Frequency fSW 2.2 2.45 2.7 MHz RT = 8.66k 3
Switching Frequency fSW 1 1.1 1.25 MHz RT = 29.4k 3
Switching Frequency fSW 200 230 260 kHz RT = 187k 3
Minimum Input Voltage VIN(MIN) 3 3.6 V l 3
Minimum Switch Off-Time tOFF(MIN) 60 150 nS l 3
Switch Current Limit ILIM 4.6 5.4 6.6 A Duty Cycle = 5% 3
Switch VCESAT VCESAT 335 mV ISW = 3.5A 3
Boost Schottky Reverse Leakage 0.02 2 µA VBOOST = 10V, VBD = 0V 3
Minimum Boost Voltage 1.5 2 V Note 4 (l) 3
BOOST Pin Current 35 50 mA ISW = 1A 3
RUN/SS Pin Current 5 8 µA VRUN/SS = 2.5V 3
RUN/SS Input Voltage High 2.5 V 3
RUN/SS Input Voltage Low 0.2 V 3
PG Leakage 0.1 1 µA VPG = 5V 3
PG Sink Current 200 800 µA VPG = 0.4V (l) 3
SYNC Low Threshold 0.5 V 3
SYNC High Threshold 0.7 V 3
Operating Junction Temperature Range TJ -40 125 °C LT3680E 2
VIN, RUN/SS Voltage 36 V 2
BOOST Pin Above SW Pin 30 V 2
FB, RT, VC Voltage 5 V 2
PG, BD, SYNC Voltage 30 V 2
Operating Junction Temperature Range (absolute) TJ -40 125 °C LT3680E 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance Junction to Ambient θJA 45 °C/W DD package 2
Thermal Resistance Junction to Case θJC 10 °C/W DD package 2
Thermal Resistance Junction to Ambient (optimized layout) θJA 35 °C/W With thermal vias and extended ground plane per High Temperature Considerations 18

CAD (KiCad official)

  • Symbol: LT3680EDD#TRPBF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lt3680edd-trpbf-etched.step / lt3680edd-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3680edd-trpbf.step / lt3680edd-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 6b5ca341795de2de, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF