main
Ray Publish 0.1.0 7d56998
{
  "slug": "lt3462aedc-trmpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3462aedc#trmpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3462aedc-trmpbf.kicad_sym",
    "lt3462aedc-trmpbf.kicad_mod",
    "lt3462aedc-trmpbf.glb",
    "lt3462aedc-trmpbf.step",
    "lt3462aedc-trmpbf.lbr",
    "docs/hero.png",
    "docs/lt3462aedc-trmpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3462aedc-trmpbf-hero.glb",
    "lt3462aedc-trmpbf-hero.overlay.json",
    "lt3462aedc-trmpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3462AEDC#TRMPBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-8-EP(2x2)",
    "pin_count": 9,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3462.pdf",
    "parts": {
      "symbol": "lt3462aedc-trmpbf.kicad_sym",
      "footprint": "lt3462aedc-trmpbf.kicad_mod",
      "model_3d": "lt3462aedc-trmpbf-hero.glb",
      "model_3d_plain": "lt3462aedc-trmpbf-etched.glb",
      "model_3d_step": "lt3462aedc-trmpbf-etched.step",
      "model_3d_step_plain": "lt3462aedc-trmpbf.step",
      "lbr": "lt3462aedc-trmpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C670574",
      "digikey": "LT3462AEDC#TRMPBFTR-ND",
      "mouser": "584-LT3462AEDC#TRMPB"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T20:08:30Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3462AEDC#TRMPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3462AEDC#TRMPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin: connect the resistive divider tap here, with R1 = R2 • (VOUT/1.265V); FB is a ground-referenced, high-impedance input."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, tie directly to the local ground plane."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, tie directly to the local ground plane."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "passive",
        "description": "Switch pin that connects to external inductor L1 and the positive terminal of the transfer cap; the SW voltage rating is 40V."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin (2.5V to 16V operating range) that must be locally bypassed."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect pin, shown as NC in the DFN pin configuration and not described in the pin functions."
      },
      {
        "number": "7",
        "name": "D",
        "type": "passive",
        "description": "Anode terminal of the integrated Schottky diode, connected to the negative terminal of the transfer cap and external inductor L2; the D voltage rating is -40V."
      },
      {
        "number": "8",
        "name": "SDREF",
        "type": "bidirectional",
        "description": "Dual-function shutdown input and 1.265V reference output that supplies up to 80µA to the feedback divider; pull to GND with an external N-FET to shut down the regulator."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed pad is GND and should be soldered to the PCB ground to achieve the rated thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DFN pin mapping is not printed as a single table. It was assembled from the 'Pin Functions' sect; Pin 6 is labeled NC in the page 2 pin configuration and has no function in the datasheet, so it is m; GND is on two pins (2 and 3) in the DFN package. Both are listed, as the datasheet indicates."
        ],
        "pages_sent": 12,
        "cost_usd": 0.0605,
        "at": "2026-10-28T20:08:11"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3462.pdf",
        "pages": 12,
        "sha256": "86b1b84c8393c4c0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3462aedc-trmpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6d66d1cc979ced2221ae536e0e0c72e1e12e47a452f2d8a7db307388a259dfc8",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3462aedc-trmpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "961872a09670cd9965047f1e601b639e65e769e2ba185ee876ba6b10b1d35600",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DC8",
      "source_page": 9,
      "e": {
        "nom_mm": 0.45,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          0.7,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3462aedc-trmpbf.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}