Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT3462AEDC#TRMPBF

Analog Devices · DC-DC Converters · DFN-8-EP(2x2)

LT3462AEDC#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback pin: connect the resistive divider tap here, with R1 = R2 • (VOUT/1.265V); FB is a ground-referenced, high-impedance input.
2 GND power_in Ground pin, tie directly to the local ground plane.
3 GND power_in Ground pin, tie directly to the local ground plane.
4 SW passive Switch pin that connects to external inductor L1 and the positive terminal of the transfer cap; the SW voltage rating is 40V.
5 VIN power_in Input supply pin (2.5V to 16V operating range) that must be locally bypassed.
6 NC unconnected No connect pin, shown as NC in the DFN pin configuration and not described in the pin functions.
7 D passive Anode terminal of the integrated Schottky diode, connected to the negative terminal of the transfer cap and external inductor L2; the D voltage rating is -40V.
8 SDREF bidirectional Dual-function shutdown input and 1.265V reference output that supplies up to 80µA to the feedback divider; pull to GND with an external N-FET to shut down the regulator.
9 EP power_in Exposed pad is GND and should be soldered to the PCB ground to achieve the rated thermal performance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage (VIN) VIN 16 V 2
SW Voltage 40 V 2
D Voltage -40 V 2
SDREF, FB Voltage 2.5 V 2
Maximum Junction Temperature TJMAX 125 °C 2
Storage Temperature Range -65 150 °C 2
Operating Ambient Temperature Range -40 85 °C Note 3 2
Minimum Operating Voltage 2.5 V 3
Maximum Operating Voltage 16 V 3
SDREF Voltage 1.245 1.265 1.285 V 10µA > ISDREF ≥ -80µA; ● full operating temperature range 3
SDREF Minus FB Voltage 1.235 1.263 1.285 V 10µA > ISDREF ≥ -80µA; ● full operating temperature range 3
Error Amp Offset Voltage -12 12 mV 3
SDREF Reference Source Current 120 180 µA SDREF >1.2V; ● full operating temperature range 3
Supply Current 2.9 6.5 mA FB = -0.05V, Not Switching 3
Supply Current in shutdown 3.6 10 µA SDREF = 0V, FB = Open, VIN = 5V 3
FB Pin Bias Current 15 50 nA Note 2 3
SDREF Line Regulation 0.007 %/V 3
Switching Frequency (LT3462A) 2 2.7 3.5 MHz ● full operating temperature range 3
Maximum Duty Cycle (LT3462A) 77 % ● full operating temperature range 3
Switch Current Limit 300 420 mA 3
Switch VCESAT VCESAT 270 350 mV ISW = 250mA 3
Switch Leakage Current 0.01 1 µA VSW = 5V 3
Rectifier Leakage Current 0.03 4 µA VD = -40V 3
Rectifier Forward Drop 800 1100 mV ISCHOTTKY = 250mA 3
SDREF Voltage Low 0.2 V ● full operating temperature range 3
SDREF Off-State Pull-Up Current 1 2 3 µA 3
SDREF Turn-Off Current -300 -200 µA 3
Thermal Resistance, junction to ambient (DC package) θJA 88.5 °C/W DC8 8-lead 2mm x 2mm DFN package 2

CAD (KiCad official)

  • Symbol: LT3462AEDC#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lt3462aedc-trmpbf-etched.step / lt3462aedc-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3462aedc-trmpbf.step / lt3462aedc-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 86b1b84c8393c4c0, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF