Generated by kicad-footprint-generator · KiCad file format 20260206
LT3462AEDC#TRMPBF
Analog Devices · DC-DC Converters · DFN-8-EP(2x2)
LT3462AEDC#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback pin: connect the resistive divider tap here, with R1 = R2 • (VOUT/1.265V); FB is a ground-referenced, high-impedance input. |
| 2 | GND | power_in | Ground pin, tie directly to the local ground plane. |
| 3 | GND | power_in | Ground pin, tie directly to the local ground plane. |
| 4 | SW | passive | Switch pin that connects to external inductor L1 and the positive terminal of the transfer cap; the SW voltage rating is 40V. |
| 5 | VIN | power_in | Input supply pin (2.5V to 16V operating range) that must be locally bypassed. |
| 6 | NC | unconnected | No connect pin, shown as NC in the DFN pin configuration and not described in the pin functions. |
| 7 | D | passive | Anode terminal of the integrated Schottky diode, connected to the negative terminal of the transfer cap and external inductor L2; the D voltage rating is -40V. |
| 8 | SDREF | bidirectional | Dual-function shutdown input and 1.265V reference output that supplies up to 80µA to the feedback divider; pull to GND with an external N-FET to shut down the regulator. |
| 9 | EP | power_in | Exposed pad is GND and should be soldered to the PCB ground to achieve the rated thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage (VIN) | VIN | 16 | V | 2 | |||
| SW Voltage | 40 | V | 2 | ||||
| D Voltage | -40 | V | 2 | ||||
| SDREF, FB Voltage | 2.5 | V | 2 | ||||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Ambient Temperature Range | -40 | 85 | °C | Note 3 | 2 | ||
| Minimum Operating Voltage | 2.5 | V | 3 | ||||
| Maximum Operating Voltage | 16 | V | 3 | ||||
| SDREF Voltage | 1.245 | 1.265 | 1.285 | V | 10µA > ISDREF ≥ -80µA; ● full operating temperature range | 3 | |
| SDREF Minus FB Voltage | 1.235 | 1.263 | 1.285 | V | 10µA > ISDREF ≥ -80µA; ● full operating temperature range | 3 | |
| Error Amp Offset Voltage | -12 | 12 | mV | 3 | |||
| SDREF Reference Source Current | 120 | 180 | µA | SDREF >1.2V; ● full operating temperature range | 3 | ||
| Supply Current | 2.9 | 6.5 | mA | FB = -0.05V, Not Switching | 3 | ||
| Supply Current in shutdown | 3.6 | 10 | µA | SDREF = 0V, FB = Open, VIN = 5V | 3 | ||
| FB Pin Bias Current | 15 | 50 | nA | Note 2 | 3 | ||
| SDREF Line Regulation | 0.007 | %/V | 3 | ||||
| Switching Frequency (LT3462A) | 2 | 2.7 | 3.5 | MHz | ● full operating temperature range | 3 | |
| Maximum Duty Cycle (LT3462A) | 77 | % | ● full operating temperature range | 3 | |||
| Switch Current Limit | 300 | 420 | mA | 3 | |||
| Switch VCESAT | VCESAT | 270 | 350 | mV | ISW = 250mA | 3 | |
| Switch Leakage Current | 0.01 | 1 | µA | VSW = 5V | 3 | ||
| Rectifier Leakage Current | 0.03 | 4 | µA | VD = -40V | 3 | ||
| Rectifier Forward Drop | 800 | 1100 | mV | ISCHOTTKY = 250mA | 3 | ||
| SDREF Voltage Low | 0.2 | V | ● full operating temperature range | 3 | |||
| SDREF Off-State Pull-Up Current | 1 | 2 | 3 | µA | 3 | ||
| SDREF Turn-Off Current | -300 | -200 | µA | 3 | |||
| Thermal Resistance, junction to ambient (DC package) | θJA | 88.5 | °C/W | DC8 8-lead 2mm x 2mm DFN package | 2 |
CAD (KiCad official)
- Symbol:
LT3462AEDC#TRMPBF - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lt3462aedc-trmpbf-etched.step/lt3462aedc-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3462aedc-trmpbf.step/lt3462aedc-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
86b1b84c8393c4c0, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).