main
Ray
Publish 0.1.0
40d3de7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206
{
"slug": "lt3420ems-1-pbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices DC-DC Converters, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lt3420ems-1#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3420ems-1-pbf.kicad_sym",
"lt3420ems-1-pbf.kicad_mod",
"lt3420ems-1-pbf.glb",
"lt3420ems-1-pbf.step",
"lt3420ems-1-pbf.lbr",
"docs/hero.png",
"docs/lt3420ems-1-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3420ems-1-pbf-hero.glb",
"lt3420ems-1-pbf-hero.overlay.json",
"lt3420ems-1-pbf-etched.glb"
],
"component": {
"mpn": "LT3420EMS-1#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-10",
"pin_count": 10,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3420fb.pdf",
"parts": {
"symbol": "lt3420ems-1-pbf.kicad_sym",
"footprint": "lt3420ems-1-pbf.kicad_mod",
"model_3d": "lt3420ems-1-pbf-hero.glb",
"model_3d_plain": "lt3420ems-1-pbf-etched.glb",
"model_3d_step": "lt3420ems-1-pbf-etched.step",
"model_3d_step_plain": "lt3420ems-1-pbf.step",
"lbr": "lt3420ems-1-pbf.lbr"
},
"distributor_links": {
"lcsc": "C670533",
"digikey": "LT3420EMS-1#PBF-ND",
"mouser": "584-LT3420EMS-1#PBF"
},
"distributor_check": {
"checked_at": "2026-10-29T00:11:50Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LT3420EMS-1#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3420EMS-1#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "RREF",
"type": "passive",
"description": "Reference resistor pin with a 1.00V threshold (0.98V to 1.02V), 2µA to 4µA bias current while switching, and a 2.5V absolute maximum voltage."
},
{
"number": "2",
"name": "VBAT",
"type": "power_in",
"description": "Battery supply pin with a 1.6V minimum (1.8V typical) and 16V maximum operating voltage, and 275mV UVLO hysteresis."
},
{
"number": "3",
"name": "RFB",
"type": "input",
"description": "Feedback pin whose bias current flows out of the pin, with an absolute maximum current rating of ±3mA."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Supply pin with a 2.2V minimum (2.5V typical) and 16V maximum operating voltage, and 40mV UVLO hysteresis."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground reference pin for the device; the datasheet gives no electrical limit specific to this pin."
},
{
"number": "6",
"name": "SW",
"type": "output",
"description": "Power switch pin rated 38V absolute maximum on the LT3420 and 50V on the LT3420-1, with switch leakage specified at 1µA maximum at those voltages."
},
{
"number": "7",
"name": "SEC",
"type": "input",
"description": "Secondary-side sense pin with a ±200mA absolute maximum current rating."
},
{
"number": "8",
"name": "DONE",
"type": "output",
"description": "Charge-complete output that reads 3.3V high through a 100k pull-up from VCC and 200mV maximum low when sinking 33µA, with a 16V voltage rating and ±1mA current rating."
},
{
"number": "9",
"name": "CHARGE",
"type": "input",
"description": "Charge enable input with a 1.5V minimum high threshold, 0.2V maximum low threshold, and 16V absolute maximum voltage."
},
{
"number": "10",
"name": "CT",
"type": "passive",
"description": "Refresh timer pin with a 1.5V absolute maximum voltage and refresh thresholds of 0.9V to 1.1V (upper) and 0.45V to 0.55V (lower)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MS top-view text is garbled, so the pin numbering was taken from the sequence 1-5 down the left ; The datasheet has no pin-function table. Descriptions are built from the listed electrical parameter; The datasheet gives no electrical limit for GND, so the description is generic."
],
"pages_sent": 3,
"cost_usd": 0.0376,
"at": "2026-10-29T00:11:34"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3420fb.pdf",
"pages": 20,
"sha256": "3e0767ae009dbdb1",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 10,
"described": 10,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3420ems-1-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3420ems-1-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9010c6ccff1410c2dd64de574c1d57449671380c00ac896aba5b2455b19bd9ca",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}