Generated by kicad-footprint-generator · KiCad file format 20260206
LT3420EMS-1#PBF
Analog Devices · DC-DC Converters · MSOP-10
LT3420EMS-1#PBF from Analog Devices, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RREF | passive | Reference resistor pin with a 1.00V threshold (0.98V to 1.02V), 2µA to 4µA bias current while switching, and a 2.5V absolute maximum voltage. |
| 2 | VBAT | power_in | Battery supply pin with a 1.6V minimum (1.8V typical) and 16V maximum operating voltage, and 275mV UVLO hysteresis. |
| 3 | RFB | input | Feedback pin whose bias current flows out of the pin, with an absolute maximum current rating of ±3mA. |
| 4 | VCC | power_in | Supply pin with a 2.2V minimum (2.5V typical) and 16V maximum operating voltage, and 40mV UVLO hysteresis. |
| 5 | GND | power_in | Ground reference pin for the device; the datasheet gives no electrical limit specific to this pin. |
| 6 | SW | output | Power switch pin rated 38V absolute maximum on the LT3420 and 50V on the LT3420-1, with switch leakage specified at 1µA maximum at those voltages. |
| 7 | SEC | input | Secondary-side sense pin with a ±200mA absolute maximum current rating. |
| 8 | DONE | output | Charge-complete output that reads 3.3V high through a 100k pull-up from VCC and 200mV maximum low when sinking 33µA, with a 16V voltage rating and ±1mA current rating. |
| 9 | CHARGE | input | Charge enable input with a 1.5V minimum high threshold, 0.2V maximum low threshold, and 16V absolute maximum voltage. |
| 10 | CT | passive | Refresh timer pin with a 1.5V absolute maximum voltage and refresh thresholds of 0.9V to 1.1V (upper) and 0.45V to 0.55V (lower). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-10 |
| Category | Power Supply Chip |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Operating Voltage, VCC | VCC | 2.2 | 2.5 | V | ● full operating temperature range | 2 | |
| Maximum Operating Voltage, VCC | VCC | 16 | V | 2 | |||
| Minimum VBAT Voltage | VBAT | 1.6 | 1.8 | V | 2 | ||
| Maximum VBAT Voltage | VBAT | 16 | V | 2 | |||
| RREF Threshold Voltage | 0.98 | 1 | 1.02 | V | 2 | ||
| RREF Threshold Voltage | 0.975 | 1.025 | V | ● full operating temperature range | 2 | ||
| RREF Pin Bias Current | 2 | 4 | µA | VRREF = 0V, Switching | 2 | ||
| Quiescent Current | IQ | 90 | 130 | µA | VRREF = 1.1V, Not Switching | 2 | |
| Quiescent Current in Shutdown | IQ | 0.01 | 1 | µA | VCHARGE = 0V, VIN = 3.3V | 2 | |
| Primary Side Current Limit LT3420-1 | 0.75 | 0.9 | 1.05 | A | Note 5 | 3 | |
| Secondary Side Current Limit LT3420-1 | 5 | 15 | 25 | mA | Note 5 | 3 | |
| Refresh Timer Charge/Discharge Current | 1.5 | 2.5 | 3.5 | µA | VCT = 0.75V | 3 | |
| Refresh Timer Upper Threshold | 0.9 | 1 | 1.1 | V | 3 | ||
| Refresh Timer Lower Threshold | 0.45 | 0.5 | 0.55 | V | 3 | ||
| Switch VCESAT LT3420-1 | VCESAT | 130 | 230 | mV | SW = 0.5A (Note 5) | 3 | |
| Switch Leakage Current | 0.01 | 1 | µA | VSW = 50V (LT3420-1) | 3 | ||
| CHARGE Input Voltage High | 1.5 | V | 3 | ||||
| CHARGE Input Voltage Low | 0.2 | V | 3 | ||||
| CHARGE Pin Bias Current | 4.5 | 15 | µA | VCHARGE = 3V | 3 | ||
| CHARGE Pin Bias Current | 0.01 | 0.1 | µA | VCHARGE = 0V | 3 | ||
| DONE Output Signal Low | 100 | 200 | mV | 33µA into DONE Pin | 3 | ||
| VCC Voltage | VCC | 16 | V | 2 | |||
| VBAT Voltage | VBAT | 16 | V | 2 | |||
| SW Voltage LT3420-1 | SW | 50 | V | Note 2 | 2 | ||
| SEC Current | -200 | 200 | mA | 2 | |||
| RFB Current | -3 | 3 | mA | 2 | |||
| RREF Voltage | 2.5 | V | 2 | ||||
| CHARGE Voltage | 16 | V | 2 | ||||
| CT Voltage | 1.5 | V | 2 | ||||
| DONE Voltage | 16 | V | 2 | ||||
| Current into DONE Pin | -1 | 1 | mA | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | Note 3; specifications guaranteed 0°C to 70°C | 2 | |
| Storage Temperature Range | TSTG | -40 | 125 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | For MS Package only | 2 | |||
| VCC UVLO Hysteresis | 40 | mV | 2 | ||||
| VBAT UVLO Hysteresis | 275 | mV | 2 | ||||
| Thermal resistance junction-to-ambient | θJA | 100 | °C/W | (4-LAYER BOARD) | 2 | ||
| Thermal resistance junction-to-case | θJC | 45 | °C/W | (4-LAYER BOARD) | 2 |
CAD (KiCad official)
- Symbol:
LT3420EMS-1#PBF - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
lt3420ems-1-pbf-etched.step/lt3420ems-1-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3420ems-1-pbf.step/lt3420ems-1-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
3e0767ae009dbdb1, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).