Generated by kicad-footprint-generator · KiCad file format 20260206
LPC804M101JDH20J
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
LPC804M101JDH20J from NXP Semicon, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_16/ACMP_I4/ADC_3 | bidirectional | General-purpose port 0 I/O pin 16, also analog comparator common input 4 and ADC input 3; it is a 5 V tolerant digital pad with configurable pull-up/pull-down resistors and hysteresis. |
| 2 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 I/O pin 17 and ADC input 9; it is 5 V tolerant for digital I/O, but when configured as an analog input the digital section is disabled and the pin is not 5 V tolerant. |
| 3 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 I/O pin 13 and ADC input 10; it is 5 V tolerant for digital I/O, but when configured as an analog input the digital section is disabled and the pin is not 5 V tolerant. |
| 4 | PIO0_12 | bidirectional | General-purpose port 0 I/O pin 12 and high-drive output pin; a LOW level on this pin during reset starts the ISP command handler. |
| 5 | RESET/PIO0_5 | input | External active-LOW reset input; a LOW-going pulse as short as 50 ns resets the device, includes a 20 ns glitch filter, and the pin can alternatively be used as GPIO PIO0_5 when no external reset is needed. |
| 6 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 I/O pin 4 and ADC input 11; in ISP mode it is the U0_TXD pin for single supply devices, and in boundary scan mode it is TRST (Test Reset). |
| 7 | SWCLK/PIO0_3/TCK | input | Serial Wire Clock (SWCLK) input, enabled by default on this pin, which is also high-drive capable GPIO PIO0_3 and TCK (Test Clock) in boundary scan mode. |
| 8 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O (SWDIO), enabled by default on this pin, which is also high-drive capable GPIO PIO0_2 and TMS (Test Mode Select) in boundary scan mode. |
| 9 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 I/O pin 11 and ADC input 6; it can host an external clock for the self-wake-up timer, active in sleep, deep-sleep and power-down modes. |
| 10 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 I/O pin 10 and ADC input 7; it is a WAKEUP-capable pin and its reset state is input with internal pull-up. |
| 11 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 I/O pin 15 and ADC input 8; it is a 5 V tolerant digital pad with configurable pull-up/pull-down resistors and hysteresis. |
| 12 | PIO0_1/ADC_0/ACMP_I2/CLKIN | bidirectional | General-purpose port 0 I/O pin 1, ADC input 0 (higher input resistance than other ADC channels), analog comparator input 2, and CLKIN external clock input with a maximum frequency of 15 MHz; in boundary scan mode it is TDI. |
| 13 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 I/O pin 9 and ADC input 4; in ISP mode it is the U0_TXD pin for dual supply devices. |
| 14 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 I/O pin 8 and ADC input 5; in ISP mode it is the U0_RXD pin for dual supply devices. |
| 15 | VDD | power_in | Supply voltage for core and external rail, specified from 1.71 V to 3.6 V; if VDDIO is present it supplies the right-side I/Os and the core regulator, otherwise it also supplies the left-side I/Os. |
| 16 | VSS | power_in | Ground reference for the device. |
| 17 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 I/O pin 7, ADC input 1 and alternate reference voltage for the analog comparator (ACMPVREF); the digital part of this pin is 3 V tolerant. |
| 18 | VREFP | power_in | ADC positive reference voltage, which must be equal to or lower than VDD and is specified from 2.5 V to VDD for ADC operation. |
| 19 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 I/O pin 0 and analog comparator input 1; in ISP mode it is the U0_RXD pin for single supply devices, and in boundary scan mode it is TDO (Test Data Out). |
| 20 | PIO0_14/ACMP_I3/ADC_2 | bidirectional | General-purpose port 0 I/O pin 14, analog comparator common input 3 and ADC input 2; it is a 5 V tolerant digital I/O with configurable hysteresis. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (core and external rail) | VDD | 1.71 | 3.6 | V | 42 | ||
| Supply voltage for ADC operations | VDD | 2.5 | 3.6 | V | For ADC operations | 42 | |
| CPU/system clock frequency | fclk | 15 | MHz | internal CPU/system clock | 42 | ||
| ADC positive reference voltage | Vref | 2.5 | V | on pin VREFP; max is VDD | 42 | ||
| Input/output capacitance, analog and digital pins | Cio | 7.1 | pF | pins with analog and digital functions | 42 | ||
| Input/output capacitance, digital-only pins | Cio | 2.8 | pF | pins with digital functions only | 42 | ||
| Supply voltage | VDD | -0.5 | 4.6 | V | core and external rail | 39 | |
| Reference voltage on VREFP | Vref | -0.5 | V | on pin VREFP; max is VDD | 39 | ||
| Input voltage, 5 V tolerant I/O pins | VI | -0.5 | 5.4 | V | VDD >= 1.71 V | 39 | |
| Input voltage, 3 V tolerant pin ACMPVREF | VI | -0.5 | 3.6 | V | 39 | ||
| Analog input voltage on digital pins | VIA | -0.5 | 4.6 | V | configured for an analog function | 39 | |
| Supply current per supply pin (TSSOP20) | IDD | 18 | mA | per supply pin (TSSOP20) | 39 | ||
| Ground current per ground pin (TSSOP20) | ISS | 40 | mA | per ground pin (TSSOP20) | 39 | ||
| I/O latch-up current | Ilatch | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 C | 39 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 39 | ||
| Maximum junction temperature | Tj(max) | 150 | °C | 39 | |||
| Total power dissipation per package (TSSOP20), JEDEC | Ptot(pack) | 0.36 | W | TSSOP20, based on package heat transfer, JEDEC (4.5 in x 4 in); still air | 39 | ||
| Total power dissipation per package (TSSOP20), single layer | Ptot(pack) | 0.26 | W | TSSOP20, based on package heat transfer, single layer (4.5 in x 3 in); still air | 40 | ||
| Electrostatic discharge voltage | Vesd | 2000 | V | human body model; all pins | 40 | ||
| Thermal resistance junction-to-ambient (TSSOP20), JEDEC | Rth(j-a) | 108 | °C/W | JEDEC (4.5 in x 4 in); still air; ±15 % | 41 | ||
| Thermal resistance junction-to-ambient (TSSOP20), single layer | Rth(j-a) | 151 | °C/W | single-layer (4.5 in x 3 in); still air; ±15 % | 41 | ||
| Thermal resistance junction-to-case (TSSOP20) | Rth(j-c) | 24 | °C/W | ±15 % | 41 | ||
| Deep-sleep mode supply current, 25 C | IDD | 100 | 175 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| Deep-sleep mode supply current, 105 C | IDD | 240 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| Power-down mode supply current, 25 C | IDD | 6 | 14 | µA | Power-down mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| Power-down mode supply current, 105 C | IDD | 75 | µA | Power-down mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| Deep power-down mode supply current, 25 C | IDD | 0.15 | 0.5 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| Deep power-down mode supply current, 105 C | IDD | 7 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| Active mode supply current, 12 MHz | IDD | 1 | mA | Active mode; system clock = 12 MHz; VDD = 3.3 V | 43 | ||
| Active mode supply current, 15 MHz | IDD | 1.3 | mA | Active mode; system clock = 15 MHz; VDD = 3.3 V | 43 | ||
| LOW-level input current | IIL | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 47 | |
| HIGH-level input current | IIH | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 47 | |
| OFF-state output current | IOZ | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 47 | |
| Input voltage, 5 V tolerant pins | VI | 0 | 5.4 | V | VDD >= 1.71 V; 5 V tolerant pins except PIO0_7 | 47 | |
| Output voltage | VO | 0 | V | output active; max is VDD | 47 | ||
| HIGH-level input voltage | VIH | 0.7 | V | min is 0.7VDD | 47 | ||
| LOW-level input voltage | VIL | 0.3 | V | max is 0.3VDD | 47 | ||
| Hysteresis voltage | Vhys | 0.4 | V | 47 | |||
| LOW-level output voltage, 2.5 V to 3.6 V | VOL | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 47 | ||
| LOW-level output voltage, 1.71 V to 2.5 V | VOL | 0.5 | V | IOL = 3 mA; 1.71 V <= VDD < 2.5 V | 47 | ||
| HIGH-level short-circuit output current | IOHS | 45 | mA | VOH = 0 V | 47 | ||
| LOW-level short-circuit output current | IOLS | 50 | mA | VOL = VDD | 47 | ||
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 47 |
| Pull-up current, 2.0 V to 3.6 V | Ipu | 10 | 50 | 90 | µA | VI = 0 V; 2.0 V <= VDD <= 3.6 V | 47 |
| Pull-up current, 1.71 V to 2.0 V | Ipu | 7 | 50 | 85 | µA | VI = 0 V; 1.71 V <= VDD < 2.0 V | 47 |
| FRO clock frequency 12 MHz, 0 to 70 C | fosc(RC) | -1 | 12 | 1 | MHz | 0 C <= Tamb <= 70 C; min/max printed as -1 %/+1 % (tolerance in %) | 53 |
| FRO clock frequency 12 MHz, -40 to 105 C | fosc(RC) | -3.5 | 12 | 2.5 | MHz | -40 C <= Tamb <= 105 C; min/max printed as -3.5 %/+2.5 % (tolerance in %) | 53 |
| LPOsc clock frequency | fosc(RC) | -3 | 1 | 3 | MHz | min/max printed as -3 %/+3 % (tolerance in %) | 53 |
| Output rise time | tr | 3 | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 | |
| Output fall time | tf | 2.5 | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 | |
| Flash endurance | Nendu | 200000 | 500000 | cycles | 52 | ||
| Flash retention time, powered | tret | 10 | years | powered | 52 | ||
| Flash retention time, not powered | tret | 20 | years | not powered | 52 | ||
| Internal voltage reference output voltage | VO | 860 | 940 | mV | Tamb = 25 C to 105 C | 65 | |
| ADC analog input capacitance | Cia | 26 | pF | 62 | |||
| ADC sampling frequency | fs | 480 | Ksamples/s | 62 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LPC804M101JDH20J - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lpc804m101jdh20j-etched.step/lpc804m101jdh20j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc804m101jdh20j.step/lpc804m101jdh20j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (90 pp, sha256
4be3cee5e8ceae1d, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).