main
Ray Publish 0.1.0 70a5261

LPC804M101JDH20J

NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20

LPC804M101JDH20J from NXP Semicon, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 PIO0_16/ACMP_I4/ADC_3 bidirectional General-purpose port 0 I/O pin 16, also analog comparator common input 4 and ADC input 3; it is a 5 V tolerant digital pad with configurable pull-up/pull-down resistors and hysteresis.
2 PIO0_17/ADC_9 bidirectional General-purpose port 0 I/O pin 17 and ADC input 9; it is 5 V tolerant for digital I/O, but when configured as an analog input the digital section is disabled and the pin is not 5 V tolerant.
3 PIO0_13/ADC_10 bidirectional General-purpose port 0 I/O pin 13 and ADC input 10; it is 5 V tolerant for digital I/O, but when configured as an analog input the digital section is disabled and the pin is not 5 V tolerant.
4 PIO0_12 bidirectional General-purpose port 0 I/O pin 12 and high-drive output pin; a LOW level on this pin during reset starts the ISP command handler.
5 RESET/PIO0_5 input External active-LOW reset input; a LOW-going pulse as short as 50 ns resets the device, includes a 20 ns glitch filter, and the pin can alternatively be used as GPIO PIO0_5 when no external reset is needed.
6 PIO0_4/ADC_11/TRSTN bidirectional General-purpose port 0 I/O pin 4 and ADC input 11; in ISP mode it is the U0_TXD pin for single supply devices, and in boundary scan mode it is TRST (Test Reset).
7 SWCLK/PIO0_3/TCK input Serial Wire Clock (SWCLK) input, enabled by default on this pin, which is also high-drive capable GPIO PIO0_3 and TCK (Test Clock) in boundary scan mode.
8 SWDIO/PIO0_2/TMS bidirectional Serial Wire Debug I/O (SWDIO), enabled by default on this pin, which is also high-drive capable GPIO PIO0_2 and TMS (Test Mode Select) in boundary scan mode.
9 PIO0_11/ADC_6/WKTCLKIN bidirectional General-purpose port 0 I/O pin 11 and ADC input 6; it can host an external clock for the self-wake-up timer, active in sleep, deep-sleep and power-down modes.
10 PIO0_10/ADC_7 bidirectional General-purpose port 0 I/O pin 10 and ADC input 7; it is a WAKEUP-capable pin and its reset state is input with internal pull-up.
11 PIO0_15/ADC_8 bidirectional General-purpose port 0 I/O pin 15 and ADC input 8; it is a 5 V tolerant digital pad with configurable pull-up/pull-down resistors and hysteresis.
12 PIO0_1/ADC_0/ACMP_I2/CLKIN bidirectional General-purpose port 0 I/O pin 1, ADC input 0 (higher input resistance than other ADC channels), analog comparator input 2, and CLKIN external clock input with a maximum frequency of 15 MHz; in boundary scan mode it is TDI.
13 PIO0_9/ADC_4 bidirectional General-purpose port 0 I/O pin 9 and ADC input 4; in ISP mode it is the U0_TXD pin for dual supply devices.
14 PIO0_8/ADC_5 bidirectional General-purpose port 0 I/O pin 8 and ADC input 5; in ISP mode it is the U0_RXD pin for dual supply devices.
15 VDD power_in Supply voltage for core and external rail, specified from 1.71 V to 3.6 V; if VDDIO is present it supplies the right-side I/Os and the core regulator, otherwise it also supplies the left-side I/Os.
16 VSS power_in Ground reference for the device.
17 PIO0_7/ADC_1/ACMPVREF bidirectional General-purpose port 0 I/O pin 7, ADC input 1 and alternate reference voltage for the analog comparator (ACMPVREF); the digital part of this pin is 3 V tolerant.
18 VREFP power_in ADC positive reference voltage, which must be equal to or lower than VDD and is specified from 2.5 V to VDD for ADC operation.
19 PIO0_0/ACMP_I1/TDO bidirectional General-purpose port 0 I/O pin 0 and analog comparator input 1; in ISP mode it is the U0_RXD pin for single supply devices, and in boundary scan mode it is TDO (Test Data Out).
20 PIO0_14/ACMP_I3/ADC_2 bidirectional General-purpose port 0 I/O pin 14, analog comparator common input 3 and ADC input 2; it is a 5 V tolerant digital I/O with configurable hysteresis.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package TSSOP-20
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (core and external rail) VDD 1.71 3.6 V 42
Supply voltage for ADC operations VDD 2.5 3.6 V For ADC operations 42
CPU/system clock frequency fclk 15 MHz internal CPU/system clock 42
ADC positive reference voltage Vref 2.5 V on pin VREFP; max is VDD 42
Input/output capacitance, analog and digital pins Cio 7.1 pF pins with analog and digital functions 42
Input/output capacitance, digital-only pins Cio 2.8 pF pins with digital functions only 42
Supply voltage VDD -0.5 4.6 V core and external rail 39
Reference voltage on VREFP Vref -0.5 V on pin VREFP; max is VDD 39
Input voltage, 5 V tolerant I/O pins VI -0.5 5.4 V VDD >= 1.71 V 39
Input voltage, 3 V tolerant pin ACMPVREF VI -0.5 3.6 V 39
Analog input voltage on digital pins VIA -0.5 4.6 V configured for an analog function 39
Supply current per supply pin (TSSOP20) IDD 18 mA per supply pin (TSSOP20) 39
Ground current per ground pin (TSSOP20) ISS 40 mA per ground pin (TSSOP20) 39
I/O latch-up current Ilatch 100 mA (0.5VDD) < VI < (1.5VDD); Tj < 125 C 39
Storage temperature Tstg -65 150 °C 39
Maximum junction temperature Tj(max) 150 °C 39
Total power dissipation per package (TSSOP20), JEDEC Ptot(pack) 0.36 W TSSOP20, based on package heat transfer, JEDEC (4.5 in x 4 in); still air 39
Total power dissipation per package (TSSOP20), single layer Ptot(pack) 0.26 W TSSOP20, based on package heat transfer, single layer (4.5 in x 3 in); still air 40
Electrostatic discharge voltage Vesd 2000 V human body model; all pins 40
Thermal resistance junction-to-ambient (TSSOP20), JEDEC Rth(j-a) 108 °C/W JEDEC (4.5 in x 4 in); still air; ±15 % 41
Thermal resistance junction-to-ambient (TSSOP20), single layer Rth(j-a) 151 °C/W single-layer (4.5 in x 3 in); still air; ±15 % 41
Thermal resistance junction-to-case (TSSOP20) Rth(j-c) 24 °C/W ±15 % 41
Deep-sleep mode supply current, 25 C IDD 100 175 µA Deep-sleep mode; VDD = 3.3 V; Tamb = 25 C 43
Deep-sleep mode supply current, 105 C IDD 240 µA Deep-sleep mode; VDD = 3.3 V; Tamb = 105 C 43
Power-down mode supply current, 25 C IDD 6 14 µA Power-down mode; VDD = 3.3 V; Tamb = 25 C 43
Power-down mode supply current, 105 C IDD 75 µA Power-down mode; VDD = 3.3 V; Tamb = 105 C 43
Deep power-down mode supply current, 25 C IDD 0.15 0.5 µA Deep power-down mode; VDD = 3.3 V; Tamb = 25 C 43
Deep power-down mode supply current, 105 C IDD 7 µA Deep power-down mode; VDD = 3.3 V; Tamb = 105 C 43
Active mode supply current, 12 MHz IDD 1 mA Active mode; system clock = 12 MHz; VDD = 3.3 V 43
Active mode supply current, 15 MHz IDD 1.3 mA Active mode; system clock = 15 MHz; VDD = 3.3 V 43
LOW-level input current IIL 0.5 10 nA VI = 0 V; on-chip pull-up resistor disabled 47
HIGH-level input current IIH 0.5 10 nA VI = VDD; on-chip pull-down resistor disabled 47
OFF-state output current IOZ 0.5 10 nA VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled 47
Input voltage, 5 V tolerant pins VI 0 5.4 V VDD >= 1.71 V; 5 V tolerant pins except PIO0_7 47
Output voltage VO 0 V output active; max is VDD 47
HIGH-level input voltage VIH 0.7 V min is 0.7VDD 47
LOW-level input voltage VIL 0.3 V max is 0.3VDD 47
Hysteresis voltage Vhys 0.4 V 47
LOW-level output voltage, 2.5 V to 3.6 V VOL 0.5 V IOL = 4 mA; 2.5 V <= VDD <= 3.6 V 47
LOW-level output voltage, 1.71 V to 2.5 V VOL 0.5 V IOL = 3 mA; 1.71 V <= VDD < 2.5 V 47
HIGH-level short-circuit output current IOHS 45 mA VOH = 0 V 47
LOW-level short-circuit output current IOLS 50 mA VOL = VDD 47
Pull-down current Ipd 10 50 150 µA VI = 5 V 47
Pull-up current, 2.0 V to 3.6 V Ipu 10 50 90 µA VI = 0 V; 2.0 V <= VDD <= 3.6 V 47
Pull-up current, 1.71 V to 2.0 V Ipu 7 50 85 µA VI = 0 V; 1.71 V <= VDD < 2.0 V 47
FRO clock frequency 12 MHz, 0 to 70 C fosc(RC) -1 12 1 MHz 0 C <= Tamb <= 70 C; min/max printed as -1 %/+1 % (tolerance in %) 53
FRO clock frequency 12 MHz, -40 to 105 C fosc(RC) -3.5 12 2.5 MHz -40 C <= Tamb <= 105 C; min/max printed as -3.5 %/+2.5 % (tolerance in %) 53
LPOsc clock frequency fosc(RC) -3 1 3 MHz min/max printed as -3 %/+3 % (tolerance in %) 53
Output rise time tr 3 5 ns pin configured as output; 3.0 V <= VDD <= 3.6 V 53
Output fall time tf 2.5 5 ns pin configured as output; 3.0 V <= VDD <= 3.6 V 53
Flash endurance Nendu 200000 500000 cycles 52
Flash retention time, powered tret 10 years powered 52
Flash retention time, not powered tret 20 years not powered 52
Internal voltage reference output voltage VO 860 940 mV Tamb = 25 C to 105 C 65
ADC analog input capacitance Cia 26 pF 62
ADC sampling frequency fs 480 Ksamples/s 62

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LPC804M101JDH20J
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lpc804m101jdh20j-etched.step / lpc804m101jdh20j-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpc804m101jdh20j.step / lpc804m101jdh20j.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (90 pp, sha256 4be3cee5e8ceae1d, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF