main
Ray
Publish 0.1.0
70a5261
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325
{
"slug": "lpc804m101jdh20j",
"version": "0.1.0",
"type": "component",
"description": "NXP Semicon Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"lpc804m101jdh20j",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lpc804m101jdh20j.kicad_sym",
"lpc804m101jdh20j.kicad_mod",
"lpc804m101jdh20j.glb",
"lpc804m101jdh20j.step",
"lpc804m101jdh20j.lbr",
"docs/hero.png",
"docs/lpc804m101jdh20j-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lpc804m101jdh20j-hero.glb",
"lpc804m101jdh20j-hero.overlay.json"
],
"component": {
"mpn": "LPC804M101JDH20J",
"manufacturer": "NXP Semicon",
"package": "TSSOP-20",
"pin_count": 20,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://www.nxp.com/docs/en/data-sheet/LPC804M101JDH20J.pdf",
"parts": {
"symbol": "lpc804m101jdh20j.kicad_sym",
"footprint": "lpc804m101jdh20j.kicad_mod",
"model_3d": "lpc804m101jdh20j-hero.glb",
"model_3d_plain": "lpc804m101jdh20j.glb",
"model_3d_step": "lpc804m101jdh20j-etched.step",
"model_3d_step_plain": "lpc804m101jdh20j.step",
"lbr": "lpc804m101jdh20j.lbr"
},
"distributor_links": {
"lcsc": "C2056857",
"digikey": "568-LPC804M101JDH20JTR-ND",
"mouser": "771-LPC804M101JDH20J"
},
"distributor_check": {
"checked_at": "2026-11-17T06:37:34Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "568-LPC804M101JDH20JTR-ND",
"status": "found"
},
"mouser": {
"pn": "771-LPC804M101JDH20J",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PIO0_16/ACMP_I4/ADC_3",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 16, also analog comparator common input 4 and ADC input 3; it is a 5 V tolerant digital pad with configurable pull-up/pull-down resistors and hysteresis."
},
{
"number": "2",
"name": "PIO0_17/ADC_9",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 17 and ADC input 9; it is 5 V tolerant for digital I/O, but when configured as an analog input the digital section is disabled and the pin is not 5 V tolerant."
},
{
"number": "3",
"name": "PIO0_13/ADC_10",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 13 and ADC input 10; it is 5 V tolerant for digital I/O, but when configured as an analog input the digital section is disabled and the pin is not 5 V tolerant."
},
{
"number": "4",
"name": "PIO0_12",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 12 and high-drive output pin; a LOW level on this pin during reset starts the ISP command handler."
},
{
"number": "5",
"name": "RESET/PIO0_5",
"type": "input",
"description": "External active-LOW reset input; a LOW-going pulse as short as 50 ns resets the device, includes a 20 ns glitch filter, and the pin can alternatively be used as GPIO PIO0_5 when no external reset is needed."
},
{
"number": "6",
"name": "PIO0_4/ADC_11/TRSTN",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 4 and ADC input 11; in ISP mode it is the U0_TXD pin for single supply devices, and in boundary scan mode it is TRST (Test Reset)."
},
{
"number": "7",
"name": "SWCLK/PIO0_3/TCK",
"type": "input",
"description": "Serial Wire Clock (SWCLK) input, enabled by default on this pin, which is also high-drive capable GPIO PIO0_3 and TCK (Test Clock) in boundary scan mode."
},
{
"number": "8",
"name": "SWDIO/PIO0_2/TMS",
"type": "bidirectional",
"description": "Serial Wire Debug I/O (SWDIO), enabled by default on this pin, which is also high-drive capable GPIO PIO0_2 and TMS (Test Mode Select) in boundary scan mode."
},
{
"number": "9",
"name": "PIO0_11/ADC_6/WKTCLKIN",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 11 and ADC input 6; it can host an external clock for the self-wake-up timer, active in sleep, deep-sleep and power-down modes."
},
{
"number": "10",
"name": "PIO0_10/ADC_7",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 10 and ADC input 7; it is a WAKEUP-capable pin and its reset state is input with internal pull-up."
},
{
"number": "11",
"name": "PIO0_15/ADC_8",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 15 and ADC input 8; it is a 5 V tolerant digital pad with configurable pull-up/pull-down resistors and hysteresis."
},
{
"number": "12",
"name": "PIO0_1/ADC_0/ACMP_I2/CLKIN",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 1, ADC input 0 (higher input resistance than other ADC channels), analog comparator input 2, and CLKIN external clock input with a maximum frequency of 15 MHz; in boundary scan mode it is TDI."
},
{
"number": "13",
"name": "PIO0_9/ADC_4",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 9 and ADC input 4; in ISP mode it is the U0_TXD pin for dual supply devices."
},
{
"number": "14",
"name": "PIO0_8/ADC_5",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 8 and ADC input 5; in ISP mode it is the U0_RXD pin for dual supply devices."
},
{
"number": "15",
"name": "VDD",
"type": "power_in",
"description": "Supply voltage for core and external rail, specified from 1.71 V to 3.6 V; if VDDIO is present it supplies the right-side I/Os and the core regulator, otherwise it also supplies the left-side I/Os."
},
{
"number": "16",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "17",
"name": "PIO0_7/ADC_1/ACMPVREF",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 7, ADC input 1 and alternate reference voltage for the analog comparator (ACMPVREF); the digital part of this pin is 3 V tolerant."
},
{
"number": "18",
"name": "VREFP",
"type": "power_in",
"description": "ADC positive reference voltage, which must be equal to or lower than VDD and is specified from 2.5 V to VDD for ADC operation."
},
{
"number": "19",
"name": "PIO0_0/ACMP_I1/TDO",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 0 and analog comparator input 1; in ISP mode it is the U0_RXD pin for single supply devices, and in boundary scan mode it is TDO (Test Data Out)."
},
{
"number": "20",
"name": "PIO0_14/ACMP_I3/ADC_2",
"type": "bidirectional",
"description": "General-purpose port 0 I/O pin 14, analog comparator common input 3 and ADC input 2; it is a 5 V tolerant digital I/O with configurable hysteresis."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN LPC804M101JDH20J has a trailing 'J' suffix that does not appear in the datasheet ordering ta; Pin types are KiCad-class judgments for multiplexed pins. The datasheet gives an I/O type per functi; Pin 12 (PIO0_1) CLKIN and pin 19 (PIO0_0) TDO/TDI roles are boundary-scan or alternate functions sel"
],
"pages_sent": 90,
"cost_usd": 0.0417,
"at": "2026-11-17T06:37:17"
},
"datasheet": {
"url": "https://www.nxp.com/docs/en/data-sheet/LPC804M101JDH20J.pdf",
"pages": 90,
"sha256": "4be3cee5e8ceae1d",
"source_tier": "mfr"
},
"cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "TSSOP",
"height_mm": 1.1,
"height_basis": "datasheet A, max",
"standoff_mm": 0.1,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.24,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.65 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.128,
"lead_thickness_basis": "default for pitch 0.65 mm, height 1.1 mm (no datasheet c read)"
},
"pins": {
"total": 20,
"described": 20,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lpc804m101jdh20j.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5be3b324874d6dd7e4b95886ff9253b960b9c35070b17a53012f9b87ee0781f5",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lpc804m101jdh20j-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "040e4ec9bea9370102315c750eb9d7f6430aa8a125e066ac1f9a2bb6941f464d",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOT360-1 (TSSOP20)",
"source_page": 72,
"D": {
"nom_mm": 6.5,
"range_mm": [
6.4,
6.6
]
},
"E1": {
"nom_mm": 4.4,
"range_mm": [
4.3,
4.5
]
},
"E": {
"nom_mm": 6.4,
"range_mm": [
6.2,
6.6
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.1,
"range_mm": [
null,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lpc804m101jdh20j.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}