Generated by kicad-footprint-generator · KiCad file format 20260206
LP55231SQX
Texas Instruments · LED Drivers · WQFN-24-EP(4x4)
LP55231SQX from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Flying capacitor 2 positive terminal, connected to the 0.47 µF C2 flying capacitor of the charge pump. |
| 2 | C1+ | passive | Flying capacitor 1 positive terminal, connected to the 0.47 µF C1 flying capacitor of the charge pump. |
| 3 | VDD | power_in | Input power supply; recommended operating range is 2.7 V to 5.5 V and absolute maximum is 6 V. |
| 4 | GND | power_in | Ground; all device voltages are referenced to the GND pin. |
| 5 | EN | input | Enable input; VIL maximum 0.5 V and VIH minimum 1.2 V, with input delay of 2 µs. |
| 6 | CLK | input | 32-kHz clock input at 32.7 kHz clock frequency; must be connected to ground if the external clock is not used. |
| 7 | INT | output | Open-drain interrupt output to the microcontroller, active low, requiring an external pullup; leave unconnected if not used. |
| 8 | SDA | bidirectional | Open-drain I2C-compatible serial interface data line, requiring an external pullup; maximum SCL/SDA clock frequency is 400 kHz. |
| 9 | SCL | input | I2C-compatible serial interface clock input, with clock frequency up to 400 kHz. |
| 10 | TRIG | bidirectional | Open-drain trigger input/output, active low, requiring an external pullup; connect to ground if not used. |
| 11 | D9 | output | Current source output 9 (high-side LED driver, up to 25.5 mA), powered from VDD. |
| 12 | D8 | output | Current source output 8 (high-side LED driver, up to 25.5 mA), powered from VDD. |
| 13 | D7 | output | Current source output 7 (high-side LED driver, up to 25.5 mA), powered from VDD. |
| 14 | D6 | output | Current source output 6 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output. |
| 15 | D5 | output | Current source output 5 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output. |
| 16 | D4 | output | Current source output 4 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output. |
| 17 | D3 | output | Current source output 3 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output. |
| 18 | D2 | output | Current source output 2 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output. |
| 19 | D1 | output | Current source output 1 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output. |
| 20 | ASEL0 | input | Serial interface address select input; with ASEL1 it sets the I2C chip address from 32h to 35h. |
| 21 | ASEL1 | input | Serial interface address select input; with ASEL0 it sets the I2C chip address from 32h to 35h. |
| 22 | VOUT | power_out | Charge pump output, boosted to a regulated 4.5 V in 1.5× mode. |
| 23 | C2- | passive | Flying capacitor 2 negative terminal, connected to the 0.47 µF C2 flying capacitor of the charge pump. |
| 24 | C1- | passive | Flying capacitor 1 negative terminal, connected to the 0.47 µF C1 flying capacitor of the charge pump. |
| 25 | DAP | power_in | Die attach (exposed thermal) pad; must be connected to GND and soldered to the PCB for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x4) |
| Category | LED Drivers |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
LP55231SQX - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lp55231sqx-etched.step/lp55231sqx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp55231sqx.step/lp55231sqx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
e25f39a43c55f08f, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).