main
History Download
Ray Publish 0.1.0 90ab146

LP55231SQX

Texas Instruments · LED Drivers · WQFN-24-EP(4x4)

LP55231SQX from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C2+ passive Flying capacitor 2 positive terminal, connected to the 0.47 µF C2 flying capacitor of the charge pump.
2 C1+ passive Flying capacitor 1 positive terminal, connected to the 0.47 µF C1 flying capacitor of the charge pump.
3 VDD power_in Input power supply; recommended operating range is 2.7 V to 5.5 V and absolute maximum is 6 V.
4 GND power_in Ground; all device voltages are referenced to the GND pin.
5 EN input Enable input; VIL maximum 0.5 V and VIH minimum 1.2 V, with input delay of 2 µs.
6 CLK input 32-kHz clock input at 32.7 kHz clock frequency; must be connected to ground if the external clock is not used.
7 INT output Open-drain interrupt output to the microcontroller, active low, requiring an external pullup; leave unconnected if not used.
8 SDA bidirectional Open-drain I2C-compatible serial interface data line, requiring an external pullup; maximum SCL/SDA clock frequency is 400 kHz.
9 SCL input I2C-compatible serial interface clock input, with clock frequency up to 400 kHz.
10 TRIG bidirectional Open-drain trigger input/output, active low, requiring an external pullup; connect to ground if not used.
11 D9 output Current source output 9 (high-side LED driver, up to 25.5 mA), powered from VDD.
12 D8 output Current source output 8 (high-side LED driver, up to 25.5 mA), powered from VDD.
13 D7 output Current source output 7 (high-side LED driver, up to 25.5 mA), powered from VDD.
14 D6 output Current source output 6 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output.
15 D5 output Current source output 5 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output.
16 D4 output Current source output 4 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output.
17 D3 output Current source output 3 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output.
18 D2 output Current source output 2 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output.
19 D1 output Current source output 1 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output.
20 ASEL0 input Serial interface address select input; with ASEL1 it sets the I2C chip address from 32h to 35h.
21 ASEL1 input Serial interface address select input; with ASEL0 it sets the I2C chip address from 32h to 35h.
22 VOUT power_out Charge pump output, boosted to a regulated 4.5 V in 1.5× mode.
23 C2- passive Flying capacitor 2 negative terminal, connected to the 0.47 µF C2 flying capacitor of the charge pump.
24 C1- passive Flying capacitor 1 negative terminal, connected to the 0.47 µF C1 flying capacitor of the charge pump.
25 DAP power_in Die attach (exposed thermal) pad; must be connected to GND and soldered to the PCB for thermal and mechanical performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x4)
Category LED Drivers
Pins 25

CAD (KiCad official)

  • Symbol: LP55231SQX
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lp55231sqx-etched.step / lp55231sqx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp55231sqx.step / lp55231sqx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (59 pp, sha256 e25f39a43c55f08f, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF