main
Ray Set visibility: public 1a90b4b
{
  "schema_version": 1,
  "type": "component",
  "slug": "lp55231sqx",
  "title": "LP55231SQX",
  "brief": "Texas Instruments LED Drivers, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "lp55231sqx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LP55231SQX",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lp55231.pdf",
    "parts": {
      "symbol": "lp55231sqx.kicad_sym",
      "footprint": "lp55231sqx.kicad_mod",
      "model_3d": "lp55231sqx-hero.glb",
      "model_3d_plain": "lp55231sqx-etched.glb",
      "model_3d_step": "lp55231sqx-etched.step",
      "model_3d_step_plain": "lp55231sqx.step",
      "lbr": "lp55231sqx.lbr"
    },
    "distributor_links": {
      "lcsc": "C544422",
      "digikey": "296-40354-2-ND",
      "mouser": "595-LP55231SQX/NOPB"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T05:13:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-40354-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LP55231SQX/NOPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C2+",
        "type": "passive",
        "description": "Flying capacitor 2 positive terminal, connected to the 0.47 µF C2 flying capacitor of the charge pump."
      },
      {
        "number": "2",
        "name": "C1+",
        "type": "passive",
        "description": "Flying capacitor 1 positive terminal, connected to the 0.47 µF C1 flying capacitor of the charge pump."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_in",
        "description": "Input power supply; recommended operating range is 2.7 V to 5.5 V and absolute maximum is 6 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; all device voltages are referenced to the GND pin."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable input; VIL maximum 0.5 V and VIH minimum 1.2 V, with input delay of 2 µs."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "32-kHz clock input at 32.7 kHz clock frequency; must be connected to ground if the external clock is not used."
      },
      {
        "number": "7",
        "name": "INT",
        "type": "output",
        "description": "Open-drain interrupt output to the microcontroller, active low, requiring an external pullup; leave unconnected if not used."
      },
      {
        "number": "8",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain I2C-compatible serial interface data line, requiring an external pullup; maximum SCL/SDA clock frequency is 400 kHz."
      },
      {
        "number": "9",
        "name": "SCL",
        "type": "input",
        "description": "I2C-compatible serial interface clock input, with clock frequency up to 400 kHz."
      },
      {
        "number": "10",
        "name": "TRIG",
        "type": "bidirectional",
        "description": "Open-drain trigger input/output, active low, requiring an external pullup; connect to ground if not used."
      },
      {
        "number": "11",
        "name": "D9",
        "type": "output",
        "description": "Current source output 9 (high-side LED driver, up to 25.5 mA), powered from VDD."
      },
      {
        "number": "12",
        "name": "D8",
        "type": "output",
        "description": "Current source output 8 (high-side LED driver, up to 25.5 mA), powered from VDD."
      },
      {
        "number": "13",
        "name": "D7",
        "type": "output",
        "description": "Current source output 7 (high-side LED driver, up to 25.5 mA), powered from VDD."
      },
      {
        "number": "14",
        "name": "D6",
        "type": "output",
        "description": "Current source output 6 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output."
      },
      {
        "number": "15",
        "name": "D5",
        "type": "output",
        "description": "Current source output 5 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output."
      },
      {
        "number": "16",
        "name": "D4",
        "type": "output",
        "description": "Current source output 4 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output."
      },
      {
        "number": "17",
        "name": "D3",
        "type": "output",
        "description": "Current source output 3 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output."
      },
      {
        "number": "18",
        "name": "D2",
        "type": "output",
        "description": "Current source output 2 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output."
      },
      {
        "number": "19",
        "name": "D1",
        "type": "output",
        "description": "Current source output 1 (high-side LED driver, up to 25.5 mA), internally connected to the charge-pump output."
      },
      {
        "number": "20",
        "name": "ASEL0",
        "type": "input",
        "description": "Serial interface address select input; with ASEL1 it sets the I2C chip address from 32h to 35h."
      },
      {
        "number": "21",
        "name": "ASEL1",
        "type": "input",
        "description": "Serial interface address select input; with ASEL0 it sets the I2C chip address from 32h to 35h."
      },
      {
        "number": "22",
        "name": "VOUT",
        "type": "power_out",
        "description": "Charge pump output, boosted to a regulated 4.5 V in 1.5× mode."
      },
      {
        "number": "23",
        "name": "C2-",
        "type": "passive",
        "description": "Flying capacitor 2 negative terminal, connected to the 0.47 µF C2 flying capacitor of the charge pump."
      },
      {
        "number": "24",
        "name": "C1-",
        "type": "passive",
        "description": "Flying capacitor 1 negative terminal, connected to the 0.47 µF C1 flying capacitor of the charge pump."
      },
      {
        "number": "25",
        "name": "DAP",
        "type": "power_in",
        "description": "Die attach (exposed thermal) pad; must be connected to GND and soldered to the PCB for thermal and mechanical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table on page 3 lists the exposed die attach pad as 'DAP' with no number. Pin number 25 is t; KiCad ERC has no open-drain class. INT (output), SDA and TRIG (bidirectional) are mapped to the clos; Current source outputs D1-D9 are typed as output; the datasheet classifies them as analog (A). The 2"
        ],
        "pages_sent": 59,
        "cost_usd": 0.2782,
        "at": "2026-11-11T05:13:13"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lp55231.pdf",
        "pages": 59,
        "sha256": "e25f39a43c55f08f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp55231sqx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp55231sqx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d20ded67c325acde1ee0832eb7a7cf4f57ced726d61a686d5bddbeee935ddae3",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RTW0024A",
      "source_page": 56,
      "D": {
        "nom_mm": 4,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "E1": {
        "nom_mm": 4,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.8,
        "range_mm": [
          null,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lp55231sqx.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-24-EP(4x4)",
      "Category": "LED Drivers",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lp55231sqx"
  ],
  "discovery_pitch": "LP55231SQX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp55231sqx.kicad_sym",
    "lp55231sqx.kicad_mod",
    "lp55231sqx.glb",
    "lp55231sqx.step",
    "lp55231sqx.lbr",
    "docs/hero.png",
    "docs/lp55231sqx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp55231sqx-hero.glb",
    "lp55231sqx-hero.overlay.json",
    "lp55231sqx-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}