main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmr51635xfddcr: viewers · Ray
lmr51635xfddcr-etched.glb Publish 0.1.0 · Ray
lmr51635xfddcr-etched.step lmr51635xfddcr: factory component page (tier=lcsc) · Ray
lmr51635xfddcr-hero.glb lmr51635xfddcr: hero GLB from the etched model (keeps the MPN mark) · Ray
lmr51635xfddcr-hero.overlay.json Publish 0.1.0 · Ray
lmr51635xfddcr.glb Publish 0.1.0 · Ray
lmr51635xfddcr.kicad_mod Publish 0.1.0 · Ray
lmr51635xfddcr.kicad_sym Publish 0.1.0 · Ray
lmr51635xfddcr.lbr Publish 0.1.0 · Ray
lmr51635xfddcr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LMR51635XFDDCR

Texas Instruments · IC · SOT-23-6

LMR51635XFDDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input to the converter: connect a resistor divider to set the output voltage, and never short this terminal to ground during operation (recommended FB range 0 to 4.5 V).
2 EN input Precision enable input (recommended 0 V to VIN): high = on, low = off, must not be left floating, can be tied to VIN, and an external resistor divider sets an adjustable UVLO.
3 VIN power_in Supply input to the internal bias LDO and high-side FET, operating over 4.3 V to 60 V, with input bypass capacitors CIN connected directly to this pin and GND.
4 GND power_in Power ground pin connected internally to the source of the low-side FET; connect to system ground and the ground side of CIN and COUT, keeping the path to CIN as short as possible.
5 SW power_out Switching output connected internally to the high-side FET source and low-side FET drain; connect to the power inductor.
6 CB passive Bootstrap capacitor connection for the high-side FET driver; connect a high-quality 100 nF capacitor from this pin to the SW pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
EN voltage rising threshold VEN(R) 1.103 1.226 1.349 V EN rising, enable switching 5
EN voltage falling threshold VEN(F) 0.887 0.985 1.084 V EN falling, disable switching 5
Reference voltage VFB 0.792 0.8 0.808 V 5
Switching frequency, CCM operation (X version) fSW1(CCM) 360 400 440 kHz CCM operation "X" version, VIN = 24V 5
High-side peak current limit (3.5A version) IHS_PK(OC) 4.2 5.1 6 A 3.5A version 6
Low-side valley current limit (3.5A version) ILS_V(OC) 3.2 4 4.8 A 3.5A version 6
VIN UVLO rising threshold VIN_UVLO(R) 4 4.25 V VIN rising 5
EN pin sourcing current post EN rising threshold IEN(P2) 10 50 nA VEN = 3V 5
VIN UVLO falling threshold VIN_UVLO(F) 3.8 V VIN falling 5
VIN UVLO hysteresis VIN_UVLO(H) 0.2 V 5
VIN shutdown supply current ISD(VIN) 2 µA VEN = 0V 5
FB input leakage current IFB(LKG) 0.2 nA VFB = 0.8V 5
Internal fixed soft-start time tSS 4 ms Time of internal reference to increase from 0.08V to 0.72V 5
High-side MOSFET on-resistance RDSON(HS) 85 mΩ ISW = -100mA 5
Low-side MOSFET on-resistance RDSON(LS) 45 mΩ ISW = 100mA 6
Minimum ON pulse width tON-MIN 70 ns VIN = 24V, IOUT = 1A 6
Maximum ON pulse width tON-MAX 5 µs VIN = 24V, IOUT = 1A 6
Minimum OFF pulse width tOFF-MIN 200 ns VIN = 24V 6
Low-side negative current limit (FPWM, 3.5A version) ILS(NOC) -3 A FPWM option, 3.5A version 6
Zero-cross detection current threshold IZC 0 A 6
FB pin voltage to trip short-circuit hiccup mode VHICCUP 0.32 V 6
Time between current-limit hiccup burst tHICCUP 85 ms 6
Thermal shutdown threshold TJ(SD) 165 °C Temperature rising 6
Thermal shutdown hysteresis TJ(HYS) 20 °C 6
Input voltage VIN to GND VIN 4.3 60 V 4
Input voltage EN VEN 0 V Maximum printed as VIN 4
Input voltage FB VFB 0 4.5 V 4
Output voltage VOUT VOUT 0.8 30 V 4
Output current IOUT (LM51635) IOUT 3.5 A 4
Operating junction temperature TJ -40 150 °C 4
Input voltage VIN to GND VIN -0.3 63 V 4
Input voltage EN to GND VEN -0.3 V Maximum printed as VIN + 0.3 V 4
Input voltage FB to GND VFB -0.3 5.5 V 4
Output voltage SW to GND VSW -0.3 63 V 4
Output voltage SW to GND, less than 10ns transients VSW -3.5 65 V Less than 10ns transients 4
Output voltage CB to SW VCB-SW -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
Junction-to-ambient thermal resistance RθJA 105.2 °C/W DDC (SOT-23-THN) 6 pins 5
Junction-to-ambient thermal resistance with TI EVM RθJA(effective) 48.5 °C/W DDC (SOT-23-THN) 6 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 49.8 °C/W DDC (SOT-23-THN) 6 pins 5
Junction-to-board thermal resistance RθJB 24.1 °C/W DDC (SOT-23-THN) 6 pins 5
Junction-to-top characterization parameter ψJT 6.2 °C/W DDC (SOT-23-THN) 6 pins 5
Junction-to-board characterization parameter ψJB 23.9 °C/W DDC (SOT-23-THN) 6 pins 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used 22

CAD (KiCad official)

  • Symbol: LMR51635XFDDCR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmr51635xfddcr-etched.step / lmr51635xfddcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr51635xfddcr.step / lmr51635xfddcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 e1f7a10d36b45dc9, retrieved 2026-10-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF