main
Ray
Publish 0.1.0
704e4e7
LMR51635XFDDCR
Texas Instruments · IC · SOT-23-6
LMR51635XFDDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input to the converter: connect a resistor divider to set the output voltage, and never short this terminal to ground during operation (recommended FB range 0 to 4.5 V). |
| 2 | EN | input | Precision enable input (recommended 0 V to VIN): high = on, low = off, must not be left floating, can be tied to VIN, and an external resistor divider sets an adjustable UVLO. |
| 3 | VIN | power_in | Supply input to the internal bias LDO and high-side FET, operating over 4.3 V to 60 V, with input bypass capacitors CIN connected directly to this pin and GND. |
| 4 | GND | power_in | Power ground pin connected internally to the source of the low-side FET; connect to system ground and the ground side of CIN and COUT, keeping the path to CIN as short as possible. |
| 5 | SW | power_out | Switching output connected internally to the high-side FET source and low-side FET drain; connect to the power inductor. |
| 6 | CB | passive | Bootstrap capacitor connection for the high-side FET driver; connect a high-quality 100 nF capacitor from this pin to the SW pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| EN voltage rising threshold | VEN(R) | 1.103 | 1.226 | 1.349 | V | EN rising, enable switching | 5 |
| EN voltage falling threshold | VEN(F) | 0.887 | 0.985 | 1.084 | V | EN falling, disable switching | 5 |
| Reference voltage | VFB | 0.792 | 0.8 | 0.808 | V | 5 | |
| Switching frequency, CCM operation (X version) | fSW1(CCM) | 360 | 400 | 440 | kHz | CCM operation "X" version, VIN = 24V | 5 |
| High-side peak current limit (3.5A version) | IHS_PK(OC) | 4.2 | 5.1 | 6 | A | 3.5A version | 6 |
| Low-side valley current limit (3.5A version) | ILS_V(OC) | 3.2 | 4 | 4.8 | A | 3.5A version | 6 |
| VIN UVLO rising threshold | VIN_UVLO(R) | 4 | 4.25 | V | VIN rising | 5 | |
| EN pin sourcing current post EN rising threshold | IEN(P2) | 10 | 50 | nA | VEN = 3V | 5 | |
| VIN UVLO falling threshold | VIN_UVLO(F) | 3.8 | V | VIN falling | 5 | ||
| VIN UVLO hysteresis | VIN_UVLO(H) | 0.2 | V | 5 | |||
| VIN shutdown supply current | ISD(VIN) | 2 | µA | VEN = 0V | 5 | ||
| FB input leakage current | IFB(LKG) | 0.2 | nA | VFB = 0.8V | 5 | ||
| Internal fixed soft-start time | tSS | 4 | ms | Time of internal reference to increase from 0.08V to 0.72V | 5 | ||
| High-side MOSFET on-resistance | RDSON(HS) | 85 | mΩ | ISW = -100mA | 5 | ||
| Low-side MOSFET on-resistance | RDSON(LS) | 45 | mΩ | ISW = 100mA | 6 | ||
| Minimum ON pulse width | tON-MIN | 70 | ns | VIN = 24V, IOUT = 1A | 6 | ||
| Maximum ON pulse width | tON-MAX | 5 | µs | VIN = 24V, IOUT = 1A | 6 | ||
| Minimum OFF pulse width | tOFF-MIN | 200 | ns | VIN = 24V | 6 | ||
| Low-side negative current limit (FPWM, 3.5A version) | ILS(NOC) | -3 | A | FPWM option, 3.5A version | 6 | ||
| Zero-cross detection current threshold | IZC | 0 | A | 6 | |||
| FB pin voltage to trip short-circuit hiccup mode | VHICCUP | 0.32 | V | 6 | |||
| Time between current-limit hiccup burst | tHICCUP | 85 | ms | 6 | |||
| Thermal shutdown threshold | TJ(SD) | 165 | °C | Temperature rising | 6 | ||
| Thermal shutdown hysteresis | TJ(HYS) | 20 | °C | 6 | |||
| Input voltage VIN to GND | VIN | 4.3 | 60 | V | 4 | ||
| Input voltage EN | VEN | 0 | V | Maximum printed as VIN | 4 | ||
| Input voltage FB | VFB | 0 | 4.5 | V | 4 | ||
| Output voltage VOUT | VOUT | 0.8 | 30 | V | 4 | ||
| Output current IOUT (LM51635) | IOUT | 3.5 | A | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Input voltage VIN to GND | VIN | -0.3 | 63 | V | 4 | ||
| Input voltage EN to GND | VEN | -0.3 | V | Maximum printed as VIN + 0.3 V | 4 | ||
| Input voltage FB to GND | VFB | -0.3 | 5.5 | V | 4 | ||
| Output voltage SW to GND | VSW | -0.3 | 63 | V | 4 | ||
| Output voltage SW to GND, less than 10ns transients | VSW | -3.5 | 65 | V | Less than 10ns transients | 4 | |
| Output voltage CB to SW | VCB-SW | -0.3 | 5.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 105.2 | °C/W | DDC (SOT-23-THN) 6 pins | 5 | ||
| Junction-to-ambient thermal resistance with TI EVM | RθJA(effective) | 48.5 | °C/W | DDC (SOT-23-THN) 6 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 49.8 | °C/W | DDC (SOT-23-THN) 6 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 24.1 | °C/W | DDC (SOT-23-THN) 6 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 6.2 | °C/W | DDC (SOT-23-THN) 6 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 23.9 | °C/W | DDC (SOT-23-THN) 6 pins | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used | 22 |
CAD (KiCad official)
- Symbol:
LMR51635XFDDCR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmr51635xfddcr-etched.step/lmr51635xfddcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr51635xfddcr.step/lmr51635xfddcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
e1f7a10d36b45dc9, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMR51635XFDDCR
**Texas Instruments** · IC · SOT-23-6
LMR51635XFDDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input to the converter: connect a resistor divider to set the output voltage, and never short this terminal to ground during operation (recommended FB range 0 to 4.5 V). |
| 2 | EN | input | Precision enable input (recommended 0 V to VIN): high = on, low = off, must not be left floating, can be tied to VIN, and an external resistor divider sets an adjustable UVLO. |
| 3 | VIN | power_in | Supply input to the internal bias LDO and high-side FET, operating over 4.3 V to 60 V, with input bypass capacitors CIN connected directly to this pin and GND. |
| 4 | GND | power_in | Power ground pin connected internally to the source of the low-side FET; connect to system ground and the ground side of CIN and COUT, keeping the path to CIN as short as possible. |
| 5 | SW | power_out | Switching output connected internally to the high-side FET source and low-side FET drain; connect to the power inductor. |
| 6 | CB | passive | Bootstrap capacitor connection for the high-side FET driver; connect a high-quality 100 nF capacitor from this pin to the SW pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| EN voltage rising threshold | VEN(R) | 1.103 | 1.226 | 1.349 | V | EN rising, enable switching | 5 |
| EN voltage falling threshold | VEN(F) | 0.887 | 0.985 | 1.084 | V | EN falling, disable switching | 5 |
| Reference voltage | VFB | 0.792 | 0.8 | 0.808 | V | | 5 |
| Switching frequency, CCM operation (X version) | fSW1(CCM) | 360 | 400 | 440 | kHz | CCM operation "X" version, VIN = 24V | 5 |
| High-side peak current limit (3.5A version) | IHS_PK(OC) | 4.2 | 5.1 | 6 | A | 3.5A version | 6 |
| Low-side valley current limit (3.5A version) | ILS_V(OC) | 3.2 | 4 | 4.8 | A | 3.5A version | 6 |
| VIN UVLO rising threshold | VIN_UVLO(R) | 4 | | 4.25 | V | VIN rising | 5 |
| EN pin sourcing current post EN rising threshold | IEN(P2) | 10 | | 50 | nA | VEN = 3V | 5 |
| VIN UVLO falling threshold | VIN_UVLO(F) | | 3.8 | | V | VIN falling | 5 |
| VIN UVLO hysteresis | VIN_UVLO(H) | | 0.2 | | V | | 5 |
| VIN shutdown supply current | ISD(VIN) | | 2 | | µA | VEN = 0V | 5 |
| FB input leakage current | IFB(LKG) | | 0.2 | | nA | VFB = 0.8V | 5 |
| Internal fixed soft-start time | tSS | | 4 | | ms | Time of internal reference to increase from 0.08V to 0.72V | 5 |
| High-side MOSFET on-resistance | RDSON(HS) | | 85 | | mΩ | ISW = -100mA | 5 |
| Low-side MOSFET on-resistance | RDSON(LS) | | 45 | | mΩ | ISW = 100mA | 6 |
| Minimum ON pulse width | tON-MIN | | 70 | | ns | VIN = 24V, IOUT = 1A | 6 |
| Maximum ON pulse width | tON-MAX | | 5 | | µs | VIN = 24V, IOUT = 1A | 6 |
| Minimum OFF pulse width | tOFF-MIN | | 200 | | ns | VIN = 24V | 6 |
| Low-side negative current limit (FPWM, 3.5A version) | ILS(NOC) | | -3 | | A | FPWM option, 3.5A version | 6 |
| Zero-cross detection current threshold | IZC | | 0 | | A | | 6 |
| FB pin voltage to trip short-circuit hiccup mode | VHICCUP | | 0.32 | | V | | 6 |
| Time between current-limit hiccup burst | tHICCUP | | 85 | | ms | | 6 |
| Thermal shutdown threshold | TJ(SD) | | 165 | | °C | Temperature rising | 6 |
| Thermal shutdown hysteresis | TJ(HYS) | | 20 | | °C | | 6 |
| Input voltage VIN to GND | VIN | 4.3 | | 60 | V | | 4 |
| Input voltage EN | VEN | 0 | | | V | Maximum printed as VIN | 4 |
| Input voltage FB | VFB | 0 | | 4.5 | V | | 4 |
| Output voltage VOUT | VOUT | 0.8 | | 30 | V | | 4 |
| Output current IOUT (LM51635) | IOUT | | | 3.5 | A | | 4 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Input voltage VIN to GND | VIN | -0.3 | | 63 | V | | 4 |
| Input voltage EN to GND | VEN | -0.3 | | | V | Maximum printed as VIN + 0.3 V | 4 |
| Input voltage FB to GND | VFB | -0.3 | | 5.5 | V | | 4 |
| Output voltage SW to GND | VSW | -0.3 | | 63 | V | | 4 |
| Output voltage SW to GND, less than 10ns transients | VSW | -3.5 | | 65 | V | Less than 10ns transients | 4 |
| Output voltage CB to SW | VCB-SW | -0.3 | | 5.5 | V | | 4 |
| Junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 105.2 | | °C/W | DDC (SOT-23-THN) 6 pins | 5 |
| Junction-to-ambient thermal resistance with TI EVM | RθJA(effective) | | 48.5 | | °C/W | DDC (SOT-23-THN) 6 pins | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 49.8 | | °C/W | DDC (SOT-23-THN) 6 pins | 5 |
| Junction-to-board thermal resistance | RθJB | | 24.1 | | °C/W | DDC (SOT-23-THN) 6 pins | 5 |
| Junction-to-top characterization parameter | ψJT | | 6.2 | | °C/W | DDC (SOT-23-THN) 6 pins | 5 |
| Junction-to-board characterization parameter | ψJB | | 23.9 | | °C/W | DDC (SOT-23-THN) 6 pins | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used | 22 |
## CAD (KiCad official)
- Symbol: `LMR51635XFDDCR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `lmr51635xfddcr-etched.step` / `lmr51635xfddcr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmr51635xfddcr.step` / `lmr51635xfddcr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmr51625.pdf?ts=1742888310253&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US%2526nr%253D3%2526searchTerm%253DLMR51625XDDCR) (34 pp, sha256 `e1f7a10d36b45dc9`, retrieved 2026-10-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmr51635xfddcr-datasheet.pdf)