main
Ray Publish 0.1.0 704e4e7
{
  "slug": "lmr51635xfddcr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments , SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "ic",
    "lmr51635xfddcr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr51635xfddcr.kicad_sym",
    "lmr51635xfddcr.kicad_mod",
    "lmr51635xfddcr.glb",
    "lmr51635xfddcr.step",
    "lmr51635xfddcr.lbr",
    "docs/hero.png",
    "docs/lmr51635xfddcr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmr51635xfddcr-hero.glb",
    "lmr51635xfddcr-hero.overlay.json",
    "lmr51635xfddcr-etched.glb"
  ],
  "component": {
    "mpn": "LMR51635XFDDCR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "IC",
    "subcategory": "IC",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmr51625.pdf?ts=1742888310253&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US%2526nr%253D3%2526searchTerm%253DLMR51625XDDCR",
    "parts": {
      "symbol": "lmr51635xfddcr.kicad_sym",
      "footprint": "lmr51635xfddcr.kicad_mod",
      "model_3d": "lmr51635xfddcr-hero.glb",
      "model_3d_plain": "lmr51635xfddcr-etched.glb",
      "model_3d_step": "lmr51635xfddcr-etched.step",
      "model_3d_step_plain": "lmr51635xfddcr.step",
      "lbr": "lmr51635xfddcr.lbr"
    },
    "distributor_links": {
      "lcsc": "C45262769",
      "digikey": "296-LMR51635XFDDCRTR-ND",
      "mouser": "595-LMR51635XFDDCR"
    },
    "distributor_check": {
      "checked_at": "2026-10-24T12:02:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-LMR51635XFDDCRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LMR51635XFDDCR",
        "status": "found",
        "lifecycle": "New Product"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the converter: connect a resistor divider to set the output voltage, and never short this terminal to ground during operation (recommended FB range 0 to 4.5 V)."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Precision enable input (recommended 0 V to VIN): high = on, low = off, must not be left floating, can be tied to VIN, and an external resistor divider sets an adjustable UVLO."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input to the internal bias LDO and high-side FET, operating over 4.3 V to 60 V, with input bypass capacitors CIN connected directly to this pin and GND."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground pin connected internally to the source of the low-side FET; connect to system ground and the ground side of CIN and COUT, keeping the path to CIN as short as possible."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "power_out",
        "description": "Switching output connected internally to the high-side FET source and low-side FET drain; connect to the power inductor."
      },
      {
        "number": "6",
        "name": "CB",
        "type": "passive",
        "description": "Bootstrap capacitor connection for the high-side FET driver; connect a high-quality 100 nF capacitor from this pin to the SW pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table (Table 5-1, page 3) lists pin types only as Analog, Power, or Ground. The Ki; The part is listed in the Device Comparison Table (page 3) and the package addendum (page 27) as LMR"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0509,
        "at": "2026-10-24T12:02:10"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmr51625.pdf?ts=1742888310253&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US%2526nr%253D3%2526searchTerm%253DLMR51625XDDCR",
        "pages": 34,
        "sha256": "e1f7a10d36b45dc9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr51635xfddcr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr51635xfddcr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c01926dcd66b353e52d0d1b44a341874ff8e364a2c9559e17932e708b71aec2b",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}