main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmr38020fsqddarq1: viewers · Ray
lmr38020fsqddarq1-etched.glb Publish 0.1.0 · Ray
lmr38020fsqddarq1-etched.step lmr38020fsqddarq1: factory component page (tier=mfr) · Ray
lmr38020fsqddarq1-hero.glb lmr38020fsqddarq1: hero GLB from the etched model (keeps the MPN mark) · Ray
lmr38020fsqddarq1-hero.overlay.json Publish 0.1.0 · Ray
lmr38020fsqddarq1.glb Publish 0.1.0 · Ray
lmr38020fsqddarq1.kicad_mod Publish 0.1.0 · Ray
lmr38020fsqddarq1.kicad_sym Publish 0.1.0 · Ray
lmr38020fsqddarq1.lbr Publish 0.1.0 · Ray
lmr38020fsqddarq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LMR38020FSQDDARQ1

Texas Instruments · DC-DC Converters · SOP-8

LMR38020FSQDDARQ1 from Texas Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power and analog ground terminal; all electrical parameters are measured with respect to this pin, and a high-quality bypass capacitor should connect directly to this pin and VIN with short and wide traces.
2 EN input Enable input to the regulator, high = ON and low = OFF, which can be connected directly to VIN and must not be left floating.
3 VIN power_in Input supply to the regulator, which operates from 4.2 V to 80 V after start-up and requires a high-quality bypass capacitor connected directly to this pin and GND with short and wide traces.
4 RT/SYNC input Resistor timing pin that sets the switching frequency from 200 kHz to 2.2 MHz with an internal amplifier holding a fixed voltage, or an external clock input for synchronization when pulled above the PLL upper threshold.
5 FB input Feedback input connected to the tap point of the feedback voltage divider, which must not be left floating or grounded.
6 PG output Open-drain power-good flag output that is high when power is OK and low when power is bad, pulls low when EN is low, and may be left open when not used.
7 BOOT power_in Bootstrap supply voltage for the internal high-side driver, which requires a high-quality 100-nF capacitor connected from this pin to the SW pin.
8 SW power_out Regulator switch node that connects to the power inductor and swings up to approximately VIN during high-side on time, with a maximum rating of 85 V to PGND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOP-8
Category Power Management
Pins 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper • Keep switch area small. Keep the copper area connecting the SW pin to the inductor as short and wide as 28

CAD (KiCad official)

  • Symbol: LMR38020FSQDDARQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lmr38020fsqddarq1-etched.step / lmr38020fsqddarq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr38020fsqddarq1.step / lmr38020fsqddarq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 f3e217a4218c6deb, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF