main
Ray Publish 0.1.1 32c680e
{
  "slug": "lmr38020fsqddarq1",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "lmr38020fsqddarq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr38020fsqddarq1.kicad_sym",
    "lmr38020fsqddarq1.kicad_mod",
    "lmr38020fsqddarq1.glb",
    "lmr38020fsqddarq1.step",
    "lmr38020fsqddarq1.lbr",
    "docs/hero.png",
    "docs/lmr38020fsqddarq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmr38020fsqddarq1-hero.glb",
    "lmr38020fsqddarq1-hero.overlay.json",
    "lmr38020fsqddarq1-etched.glb",
    "lmr38020fsqddarq1-etched.step"
  ],
  "component": {
    "mpn": "LMR38020FSQDDARQ1",
    "manufacturer": "Texas Instruments",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Management",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmr38020-q1.pdf?ts=1695215350757&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US%2526searchTerm%253DLMR38020FSQDDARQ1%2526nr%253D4",
    "parts": {
      "symbol": "lmr38020fsqddarq1.kicad_sym",
      "footprint": "lmr38020fsqddarq1.kicad_mod",
      "model_3d": "lmr38020fsqddarq1-hero.glb",
      "model_3d_plain": "lmr38020fsqddarq1.glb",
      "model_3d_step": "lmr38020fsqddarq1-etched.step",
      "model_3d_step_plain": "lmr38020fsqddarq1.step",
      "lbr": "lmr38020fsqddarq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C20345530",
      "digikey": "296-LMR38020FSQDDARQ1TR-ND",
      "mouser": "595-MR38020FSQDDARQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T16:31:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-LMR38020FSQDDARQ1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-MR38020FSQDDARQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Power and analog ground terminal; all electrical parameters are measured with respect to this pin, and a high-quality bypass capacitor should connect directly to this pin and VIN with short and wide traces."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input to the regulator, high = ON and low = OFF, which can be connected directly to VIN and must not be left floating."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the regulator, which operates from 4.2 V to 80 V after start-up and requires a high-quality bypass capacitor connected directly to this pin and GND with short and wide traces."
      },
      {
        "number": "4",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Resistor timing pin that sets the switching frequency from 200 kHz to 2.2 MHz with an internal amplifier holding a fixed voltage, or an external clock input for synchronization when pulled above the PLL upper threshold."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input connected to the tap point of the feedback voltage divider, which must not be left floating or grounded."
      },
      {
        "number": "6",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good flag output that is high when power is OK and low when power is bad, pulls low when EN is low, and may be left open when not used."
      },
      {
        "number": "7",
        "name": "BOOT",
        "type": "power_in",
        "description": "Bootstrap supply voltage for the internal high-side driver, which requires a high-quality 100-nF capacitor connected from this pin to the SW pin."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "power_out",
        "description": "Regulator switch node that connects to the power inductor and swings up to approximately VIN during high-side on time, with a maximum rating of 85 V to PGND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 5-1 does not number the exposed thermal pad; it is printed as EP and is listed here with its p"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0151,
        "at": "2026-11-02T16:31:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmr38020-q1.pdf?ts=1695215350757&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US%2526searchTerm%253DLMR38020FSQDDARQ1%2526nr%253D4",
        "pages": 43,
        "sha256": "f3e217a4218c6deb",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr38020fsqddarq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr38020fsqddarq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "304f1fd479b5ee7389372cac1b9b7ab85841fceabf338625b33da66a3a1a9209",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "LMR38020FSQDDARQ1",
  "brief": "Texas Instruments DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOP-8",
      "Category": "Power Management",
      "Pins": "8"
    },
    "appearance": {
      "contacts": {
        "quote": "• Keep switch area small. Keep the copper area connecting the SW pin to the inductor as short and wide as",
        "page": 28,
        "doc": "ds.pdf",
        "material": "copper"
      },
      "version": 1,
      "datasheet_sha256": "f3e217a4218c6deba1328f115d1656f50e993aa73eec31cffbd024afca903f65"
    }
  },
  "discovery_triggers": [
    "lmr38020fsqddarq1"
  ],
  "discovery_pitch": "LMR38020FSQDDARQ1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}