component
LMR36520FADDAR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lmr36520faddar
196b786
LMR36520FADDAR
Texas Instruments · DC-DC Converters · SO-8
LMR36520FADDAR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power and analog ground terminal serving as ground reference for internal circuits; all electrical parameters measured relative to this pin. |
| 2 | VIN | power_in | Input power supply to regulator with recommended range 4.2V to 65V; connect quality bypass capacitors directly to this pin and PGND. |
| 3 | EN | input | Enable input; high level enables operation, low level disables operation; can connect directly to VIN but must not be left floating. |
| 4 | PG | output | Open-drain power good flag output; provides high level when power is good and low level when power is bad or EN is low; must connect through current-limiting resistor to voltage supply. |
| 5 | FB | input | Feedback input connected to tap point of feedback voltage divider for regulator output voltage setting; must not be left floating. |
| 6 | VCC | power_out | Internal 5V LDO regulated output used as power supply for internal control circuit; do not connect to external loads; requires 1µF capacitor between this pin and PGND. |
| 7 | BOOT | power_in | Bootstrap power voltage supply for internal high-side gate driver; requires 100nF quality capacitor connected between this pin and SW pin. |
| 8 | SW | output | Regulator switch node driven by internal switching MOSFETs; connect to external power inductor for energy transfer during buck conversion. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LMR36520FADDAR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lmr36520faddar-etched.step/lmr36520faddar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr36520faddar.step/lmr36520faddar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
14e019f7486a9fe9, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMR36520FADDAR
**Texas Instruments** · DC-DC Converters · SO-8
LMR36520FADDAR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power and analog ground terminal serving as ground reference for internal circuits; all electrical parameters measured relative to this pin. |
| 2 | VIN | power_in | Input power supply to regulator with recommended range 4.2V to 65V; connect quality bypass capacitors directly to this pin and PGND. |
| 3 | EN | input | Enable input; high level enables operation, low level disables operation; can connect directly to VIN but must not be left floating. |
| 4 | PG | output | Open-drain power good flag output; provides high level when power is good and low level when power is bad or EN is low; must connect through current-limiting resistor to voltage supply. |
| 5 | FB | input | Feedback input connected to tap point of feedback voltage divider for regulator output voltage setting; must not be left floating. |
| 6 | VCC | power_out | Internal 5V LDO regulated output used as power supply for internal control circuit; do not connect to external loads; requires 1µF capacitor between this pin and PGND. |
| 7 | BOOT | power_in | Bootstrap power voltage supply for internal high-side gate driver; requires 100nF quality capacitor connected between this pin and SW pin. |
| 8 | SW | output | Regulator switch node driven by internal switching MOSFETs; connect to external power inductor for energy transfer during buck conversion. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LMR36520FADDAR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lmr36520faddar-etched.step` / `lmr36520faddar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmr36520faddar.step` / `lmr36520faddar.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmr36520) (40 pp, sha256 `14e019f7486a9fe9`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmr36520faddar-datasheet.pdf)