Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMR36520FADDAR

Texas Instruments · DC-DC Converters · SO-8

LMR36520FADDAR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power and analog ground terminal serving as ground reference for internal circuits; all electrical parameters measured relative to this pin.
2 VIN power_in Input power supply to regulator with recommended range 4.2V to 65V; connect quality bypass capacitors directly to this pin and PGND.
3 EN input Enable input; high level enables operation, low level disables operation; can connect directly to VIN but must not be left floating.
4 PG output Open-drain power good flag output; provides high level when power is good and low level when power is bad or EN is low; must connect through current-limiting resistor to voltage supply.
5 FB input Feedback input connected to tap point of feedback voltage divider for regulator output voltage setting; must not be left floating.
6 VCC power_out Internal 5V LDO regulated output used as power supply for internal control circuit; do not connect to external loads; requires 1µF capacitor between this pin and PGND.
7 BOOT power_in Bootstrap power voltage supply for internal high-side gate driver; requires 100nF quality capacitor connected between this pin and SW pin.
8 SW output Regulator switch node driven by internal switching MOSFETs; connect to external power inductor for energy transfer during buck conversion.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LMR36520FADDAR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lmr36520faddar-etched.step / lmr36520faddar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr36520faddar.step / lmr36520faddar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 14e019f7486a9fe9, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF