← Commit history

Initial commit: component/lmr36520faddar

Ray ·196b786acf ·
2 files changed +189
README.mdadded+45
@@ -0,0 +1,45 @@+# LMR36520FADDAR++**Texas Instruments** · DC-DC Converters · SO-8++LMR36520FADDAR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGND | power_in | Power and analog ground terminal serving as ground reference for internal circuits; all electrical parameters measured relative to this pin. |+| 2 | VIN | power_in | Input power supply to regulator with recommended range 4.2V to 65V; connect quality bypass capacitors directly to this pin and PGND. |+| 3 | EN | input | Enable input; high level enables operation, low level disables operation; can connect directly to VIN but must not be left floating. |+| 4 | PG | output | Open-drain power good flag output; provides high level when power is good and low level when power is bad or EN is low; must connect through current-limiting resistor to voltage supply. |+| 5 | FB | input | Feedback input connected to tap point of feedback voltage divider for regulator output voltage setting; must not be left floating. |+| 6 | VCC | power_out | Internal 5V LDO regulated output used as power supply for internal control circuit; do not connect to external loads; requires 1µF capacitor between this pin and PGND. |+| 7 | BOOT | power_in | Bootstrap power voltage supply for internal high-side gate driver; requires 100nF quality capacitor connected between this pin and SW pin. |+| 8 | SW | output | Regulator switch node driven by internal switching MOSFETs; connect to external power inductor for energy transfer during buck conversion. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SO-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LMR36520FADDAR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)+- 3D model files: `lmr36520faddar-etched.step` / `lmr36520faddar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmr36520faddar.step` / `lmr36520faddar.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmr36520) (40 pp, sha256 `14e019f7486a9fe9`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmr36520faddar-datasheet.pdf)
page.jsonadded+144
@@ -0,0 +1,144 @@+{+  "slug": "lmr36520faddar",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lmr36520faddar",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lmr36520faddar.kicad_sym",+    "lmr36520faddar.kicad_mod",+    "lmr36520faddar.glb",+    "lmr36520faddar.step",+    "lmr36520faddar.lbr",+    "docs/hero.png",+    "docs/lmr36520faddar-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LMR36520FADDAR",+    "manufacturer": "Texas Instruments",+    "package": "SO-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lmr36520",+    "parts": {+      "symbol": "lmr36520faddar.kicad_sym",+      "footprint": "lmr36520faddar.kicad_mod",+      "model_3d": "lmr36520faddar-etched.glb",+      "model_3d_plain": "lmr36520faddar.glb",+      "model_3d_step": "lmr36520faddar-etched.step",+      "model_3d_step_plain": "lmr36520faddar.step",+      "lbr": "lmr36520faddar.lbr"+    },+    "distributor_links": {+      "lcsc": "C1858395"+    },+    "pins": [+      {+        "number": "1",+        "name": "PGND",+        "type": "power_in",+        "description": "Power and analog ground terminal serving as ground reference for internal circuits; all electrical parameters measured relative to this pin."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Input power supply to regulator with recommended range 4.2V to 65V; connect quality bypass capacitors directly to this pin and PGND."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable input; high level enables operation, low level disables operation; can connect directly to VIN but must not be left floating."+      },+      {+        "number": "4",+        "name": "PG",+        "type": "output",+        "description": "Open-drain power good flag output; provides high level when power is good and low level when power is bad or EN is low; must connect through current-limiting resistor to voltage supply."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback input connected to tap point of feedback voltage divider for regulator output voltage setting; must not be left floating."+      },+      {+        "number": "6",+        "name": "VCC",+        "type": "power_out",+        "description": "Internal 5V LDO regulated output used as power supply for internal control circuit; do not connect to external loads; requires 1µF capacitor between this pin and PGND."+      },+      {+        "number": "7",+        "name": "BOOT",+        "type": "power_in",+        "description": "Bootstrap power voltage supply for internal high-side gate driver; requires 100nF quality capacitor connected between this pin and SW pin."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "output",+        "description": "Regulator switch node driven by internal switching MOSFETs; connect to external power inductor for energy transfer during buck conversion."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal Pad (PAD) is included as listed in datasheet Table 5-1, but pinout definitions may conventio; PG pin is specified as open-drain output in datasheet description, which may warrant 'open_collector",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 40,+        "cost_usd": 0.4102,+        "at": "2026-09-23T13:33:21"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lmr36520",+        "pages": 40,+        "sha256": "14e019f7486a9fe9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file