main
Ray lmr36510faddar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) c085271
{
  "slug": "lmr36510faddar",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lmr36510faddar",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr36510faddar.kicad_sym",
    "lmr36510faddar.kicad_mod",
    "lmr36510faddar.glb",
    "lmr36510faddar.step",
    "lmr36510faddar.lbr",
    "docs/hero.png",
    "docs/lmr36510faddar-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LMR36510FADDAR",
    "manufacturer": "Texas Instruments",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lmr36510",
    "parts": {
      "symbol": "lmr36510faddar.kicad_sym",
      "footprint": "lmr36510faddar.kicad_mod",
      "model_3d": "lmr36510faddar-etched.glb",
      "model_3d_plain": "lmr36510faddar.glb",
      "model_3d_step": "lmr36510faddar-etched.step",
      "model_3d_step_plain": "lmr36510faddar.step",
      "lbr": "lmr36510faddar.lbr"
    },
    "distributor_links": {
      "lcsc": "C1858394"
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power and analog ground terminal serving as ground reference for all electrical parameters and internal reference and logic circuits."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power supply with operating range 4.2V to 65V; requires quality bypass capacitors connected directly to this pin and PGND."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input with precision thresholds for device control: high level (≥ VEN-H = 1.157V) enables operation, low level (≤ VEN-L) disables; can connect directly to VIN but must not float."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power good flag output: high indicates normal output (FB ≥ 95%), low indicates fault or EN disabled; requires external pull-up; can be left open if unused."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input regulated to 1V ± 1.5% nominal by internal error amplifier; connect to resistive divider tap of output voltage; must not be left floating."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 5V LDO output (4.75V to 5.25V nominal) supplying control circuit power; do not connect external load; requires 1µF bypass capacitor to PGND."
      },
      {
        "number": "7",
        "name": "BOOT",
        "type": "power_out",
        "description": "Bootstrap supply voltage for internal high-side gate driver; requires 100nF quality ceramic capacitor connected between this pin and SW node."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Regulator switch node output connecting to power inductor; switches at 400kHz with voltage range 0V to VIN with maximum transient overshoot to 70.3V."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal PAD (exposed thermal pad for heat dissipation) is documented in datasheet but not formally n",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 40,
        "cost_usd": 0.3827,
        "at": "2026-09-23T03:38:34"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lmr36510",
        "pages": 40,
        "sha256": "365960058d0081b5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr36510faddar.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr36510faddar-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c5a60b3ff9c73f66a73fc709dae89f4b684be41511f1496ba43a521f9d25f7e5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}