← Commit history

lmr36510faddar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·c0852717d4 · ·parent 17b40d0
2 files changed +88−8
package.json+46−6
@@ -65,25 +65,25 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable input with precision thresholds for device control: high level (\u2265 VEN-H = 1.157V) enables operation, low level (\u2264 VEN-L) disables; can connect directly to VIN but must not float."+        "description": "Enable input with precision thresholds for device control: high level (≥ VEN-H = 1.157V) enables operation, low level (≤ VEN-L) disables; can connect directly to VIN but must not float."       },       {         "number": "4",         "name": "PG",         "type": "output",-        "description": "Open-drain power good flag output: high indicates normal output (FB \u2265 95%), low indicates fault or EN disabled; requires external pull-up; can be left open if unused."+        "description": "Open-drain power good flag output: high indicates normal output (FB ≥ 95%), low indicates fault or EN disabled; requires external pull-up; can be left open if unused."       },       {         "number": "5",         "name": "FB",         "type": "input",-        "description": "Feedback input regulated to 1V \u00b1 1.5% nominal by internal error amplifier; connect to resistive divider tap of output voltage; must not be left floating."+        "description": "Feedback input regulated to 1V ± 1.5% nominal by internal error amplifier; connect to resistive divider tap of output voltage; must not be left floating."       },       {         "number": "6",         "name": "VCC",         "type": "power_out",-        "description": "Internal 5V LDO output (4.75V to 5.25V nominal) supplying control circuit power; do not connect external load; requires 1\u00b5F bypass capacitor to PGND."+        "description": "Internal 5V LDO output (4.75V to 5.25V nominal) supplying control circuit power; do not connect external load; requires 1µF bypass capacitor to PGND."       },       {         "number": "7",@@ -139,6 +139,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lmr36510faddar.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.9,+          4.9,+          1.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lmr36510faddar-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.9,+          4.9,+          1.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "c5a60b3ff9c73f66a73fc709dae89f4b684be41511f1496ba43a521f9d25f7e5",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -124,7 +124,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lmr36510faddar.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.9,+          4.9,+          1.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lmr36510faddar-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.9,+          4.9,+          1.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "c5a60b3ff9c73f66a73fc709dae89f4b684be41511f1496ba43a521f9d25f7e5",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -172,4 +212,4 @@     "public": true   },   "updated_at": "2026-09-28T17:23:54.770Z"-}\ No newline at end of file+}