main
Ray lmr33610bddar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) dbd51dc
{
  "slug": "lmr33610bddar",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lmr33610bddar",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr33610bddar.kicad_sym",
    "lmr33610bddar.kicad_mod",
    "lmr33610bddar.glb",
    "lmr33610bddar.step",
    "lmr33610bddar.lbr",
    "docs/hero.png",
    "docs/lmr33610bddar-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LMR33610BDDAR",
    "manufacturer": "Texas Instruments",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lmr33610",
    "parts": {
      "symbol": "lmr33610bddar.kicad_sym",
      "footprint": "lmr33610bddar.kicad_mod",
      "model_3d": "lmr33610bddar-etched.glb",
      "model_3d_plain": "lmr33610bddar.glb",
      "model_3d_step": "lmr33610bddar-etched.step",
      "model_3d_step_plain": "lmr33610bddar.step",
      "lbr": "lmr33610bddar.lbr"
    },
    "distributor_links": {
      "lcsc": "C1852153"
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin that connects to system ground and AGND with bypass capacitor using short wide traces."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to regulator rated 3.8 V to 36 V with high-quality bypass capacitor connected directly to this pin and PGND."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input to regulator where high = ON and low = OFF, can be connected directly to VIN, and must not float."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good flag output where high = power OK and low = power bad, pulls low when EN = low, and requires current limiting resistor to suitable voltage supply."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to regulator nominally 1 V for regulation, connected to tap point of feedback voltage divider, must not float or be grounded."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 5-V LDO output (4.75 V to 5.25 V) supplying internal control circuits, requires 1-µF capacitor connected from this pin to GND, and must not be loaded with external circuits."
      },
      {
        "number": "7",
        "name": "BOOT",
        "type": "power_in",
        "description": "Bootstrap supply voltage for internal high-side driver with 2.2 V undervoltage lockout threshold, requires 100-nF capacitor connected from this pin to SW."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Regulator switch node driven between GND and VIN that connects to the power inductor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 41,
        "cost_usd": 0.4282,
        "at": "2026-09-24T08:14:20"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lmr33610",
        "pages": 41,
        "sha256": "2dcad538089d5df2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr33610bddar.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr33610bddar-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7ab07d2733d405477b91eba482266cfd7e8ebb14d6e25eb46f0acad4a4301ef2",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}