main
Ray Publish 0.1.0 6e2674f
{
  "slug": "lmp7711mke",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Precision Op Amps, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "lmp7711mke",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmp7711mke.kicad_sym",
    "lmp7711mke.kicad_mod",
    "lmp7711mke.glb",
    "lmp7711mke.step",
    "lmp7711mke.lbr",
    "docs/hero.png",
    "docs/lmp7711mke-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmp7711mke-hero.glb",
    "lmp7711mke-hero.overlay.json",
    "lmp7711mke-etched.glb"
  ],
  "component": {
    "mpn": "LMP7711MKE",
    "manufacturer": "Texas Instruments",
    "package": "TSOT-23-6",
    "pin_count": 6,
    "category": "Amplifiers/Comparators",
    "subcategory": "Precision Op Amps",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmp7711.pdf",
    "parts": {
      "symbol": "lmp7711mke.kicad_sym",
      "footprint": "lmp7711mke.kicad_mod",
      "model_3d": "lmp7711mke-hero.glb",
      "model_3d_plain": "lmp7711mke-etched.glb",
      "model_3d_step": "lmp7711mke-etched.step",
      "model_3d_step_plain": "lmp7711mke.step",
      "lbr": "lmp7711mke.lbr"
    },
    "distributor_links": {
      "lcsc": "C2871365",
      "digikey": "LMP7711MKE/NOPBTR-ND",
      "mouser": "926-LMP7711MKE/NOPB"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T04:41:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LMP7711MKE/NOPBTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "926-LMP7711MKE/NOPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "output",
        "description": "Single-amplifier output, which swings within 25 mV of either rail in the application notes; load-dependent swing is given in the electrical characteristics (for example, 32 mV high and 42 mV low at 5V with RL = 2 kΩ to V+/2)."
      },
      {
        "number": "2",
        "name": "V-",
        "type": "power_in",
        "description": "Negative power supply; the datasheet tests with V- = 0V and specifies the supply as VS = V+ − V-, with a 1.8V to 5.5V range over 0°C to 125°C and 2.0V to 5.5V over −40°C to 125°C."
      },
      {
        "number": "3",
        "name": "+IN",
        "type": "input",
        "description": "Non-inverting input; the input common-mode range extends from −0.3V to 1.5V at 2.5V supply and from −0.3V to 4V at 5V supply, with CMRR ≥ 80 dB."
      },
      {
        "number": "4",
        "name": "-IN",
        "type": "input",
        "description": "Inverting input; it shares the same common-mode voltage range as +IN and has an input bias current of 0.1 pA typical at 5V (VCM = 2.0V, TA = 25°C)."
      },
      {
        "number": "5",
        "name": "V+",
        "type": "power_in",
        "description": "Positive power supply, specified at 1.8V to 5.5V; the supply current is 1.15 mA typical for the LMP7711 at 5V in enable mode."
      },
      {
        "number": "6",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: drive it at or above 2.1V (2.5V supply) or 4.6V (5V supply) for enable mode, or at or below 0.4V for shutdown, where supply current drops to 0.14 µA typical."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The connection diagram (Figure 3, page 6) is garbled in the extracted text. Pin numbers were matched; The datasheet gives no separate per-pin functional description. The descriptions are built from the "
        ],
        "pages_sent": 26,
        "cost_usd": 0.1169,
        "at": "2026-11-11T04:41:19"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmp7711.pdf",
        "pages": 26,
        "sha256": "6c11c68131c01f7f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmp7711mke.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmp7711mke-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "629cbc27fec052bd57c38874d27b51a530d08372dd1dca7de9876ff11c0ef829",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}