Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMP7711MKE

Texas Instruments · Precision Op Amps · TSOT-23-6

LMP7711MKE from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Single-amplifier output, which swings within 25 mV of either rail in the application notes; load-dependent swing is given in the electrical characteristics (for example, 32 mV high and 42 mV low at 5V with RL = 2 kΩ to V+/2).
2 V- power_in Negative power supply; the datasheet tests with V- = 0V and specifies the supply as VS = V+ − V-, with a 1.8V to 5.5V range over 0°C to 125°C and 2.0V to 5.5V over −40°C to 125°C.
3 +IN input Non-inverting input; the input common-mode range extends from −0.3V to 1.5V at 2.5V supply and from −0.3V to 4V at 5V supply, with CMRR ≥ 80 dB.
4 -IN input Inverting input; it shares the same common-mode voltage range as +IN and has an input bias current of 0.1 pA typical at 5V (VCM = 2.0V, TA = 25°C).
5 V+ power_in Positive power supply, specified at 1.8V to 5.5V; the supply current is 1.15 mA typical for the LMP7711 at 5V in enable mode.
6 EN input Enable pin: drive it at or above 2.1V (2.5V supply) or 4.6V (5V supply) for enable mode, or at or below 0.4V for shutdown, where supply current drops to 0.14 µA typical.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Differential VIN -0.3 0.3 V 2
Supply Voltage (V+ - V-) VS 6 V 2
Storage Temperature Range -65 150 °C 2
Junction Temperature 150 °C 2
Operating Temperature Range -40 125 °C 2
Supply Voltage VS 1.8 5.5 V 0°C ≤ TA ≤ 125°C 2
Supply Voltage VS 2 5.5 V −40°C ≤ TA ≤ 125°C 2
Package Thermal Resistance (6-Pin SOT) θJA 170 °C/W 6-Pin SOT 2
Input Offset Voltage VOS -180 20 180 μV V+ = 2.5V; TA = 25°C 3
Input Offset Voltage (temperature extremes) VOS -480 480 μV V+ = 2.5V; boldface limit, temperature extremes 3
Input Bias Current IB 0.05 1 pA V+ = 2.5V; VCM = 1.0V; −40°C ≤ TA ≤ 85°C 3
Input Offset Current IOS 0.006 0.5 pA V+ = 2.5V; VCM = 1.0V; TA = 25°C 3
Common Mode Rejection Ratio CMRR 83 100 dB V+ = 2.5V; 0V ≤ VCM ≤ 1.4V; TA = 25°C 3
Power Supply Rejection Ratio PSRR 85 100 dB V+ = 2.5V; 2.0V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C 3
Power Supply Rejection Ratio PSRR 85 98 dB V+ = 2.5V; 1.8V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C 3
Common Mode Voltage Range CMVR -0.3 1.5 V V+ = 2.5V; CMRR ≥ 80 dB 3
Open Loop Voltage Gain AVOL 88 98 dB V+ = 2.5V; VO = 0.15 to 2.2V; RL = 2 kΩ to V+/2; TA = 25°C 3
Open Loop Voltage Gain AVOL 92 114 dB V+ = 2.5V; VO = 0.15 to 2.2V; RL = 10 kΩ to V+/2; TA = 25°C 3
Output Voltage Swing High VOUT 25 70 mV V+ = 2.5V; RL = 2 kΩ to V+/2; mV from either rail 3
Output Voltage Swing High VOUT 20 60 mV V+ = 2.5V; RL = 10 kΩ to V+/2; mV from either rail 3
Output Voltage Swing Low VOUT 30 70 mV V+ = 2.5V; RL = 2 kΩ to V+/2; mV from either rail 3
Output Voltage Swing Low VOUT 15 60 mV V+ = 2.5V; RL = 10 kΩ to V+/2; mV from either rail 3
Output Current Sourcing IOUT 36 52 mA V+ = 2.5V; sourcing to V-; VIN = 200 mV 3
Output Current Sinking IOUT 7.5 15 mA V+ = 2.5V; sinking to V+; VIN = −200 mV 3
Supply Current (LMP7711) IS 0.95 1.3 mA V+ = 2.5V; enable mode, VEN ≥ 2.1V 3
Supply Current, Shutdown (per channel) IS 0.03 1 μA V+ = 2.5V; shutdown mode, VEN ≤ 0.4V 3
Enable Pin Voltage, Enable Mode VEN 2.1 V V+ = 2.5V 4
Enable Pin Voltage, Shutdown Mode VEN 0.4 V V+ = 2.5V 4
Enable Pin Input Current IEN 1.5 3 μA V+ = 2.5V; VEN = 2.5V 4
Enable Pin Input Current IEN 0.003 0.1 μA V+ = 2.5V; VEN = 0V 4
Input Offset Voltage VOS -150 10 150 μV V+ = 5V; TA = 25°C 4
Input Offset Voltage (temperature extremes) VOS -450 450 μV V+ = 5V; boldface limit, temperature extremes 4
Input Bias Current IB 0.1 1 pA V+ = 5V; VCM = 2.0V; −40°C ≤ TA ≤ 85°C 4
Input Offset Current IOS 0.01 0.5 pA V+ = 5V; VCM = 2.0V; TA = 25°C 4
Common Mode Rejection Ratio CMRR 85 100 dB V+ = 5V; 0V ≤ VCM ≤ 3.7V; TA = 25°C 4
Power Supply Rejection Ratio PSRR 85 100 dB V+ = 5V; 2.0V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C 4
Power Supply Rejection Ratio PSRR 85 98 dB V+ = 5V; 1.8V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C 4
Common Mode Voltage Range CMVR -0.3 4 V V+ = 5V; CMRR ≥ 80 dB 4
Open Loop Voltage Gain AVOL 88 107 dB V+ = 5V; VO = 0.3 to 4.7V; RL = 2 kΩ to V+/2; TA = 25°C 5
Open Loop Voltage Gain AVOL 92 114 dB V+ = 5V; VO = 0.3 to 4.7V; RL = 10 kΩ to V+/2; TA = 25°C 5
Output Voltage Swing High VOUT 32 70 mV V+ = 5V; RL = 2 kΩ to V+/2; mV from either rail 5
Output Voltage Swing High VOUT 22 60 mV V+ = 5V; RL = 10 kΩ to V+/2; mV from either rail 5
Output Voltage Swing Low (LMP7711) VOUT 42 70 mV V+ = 5V; RL = 2 kΩ to V+/2; mV from either rail 5
Output Voltage Swing Low VOUT 20 60 mV V+ = 5V; RL = 10 kΩ to V+/2; mV from either rail 5
Output Current Sourcing IOUT 46 66 mA V+ = 5V; sourcing to V-; VIN = 200 mV 5
Output Current Sinking IOUT 10.5 23 mA V+ = 5V; sinking to V+; VIN = −200 mV 5
Slew Rate Rising SR 6 9.5 V/μs V+ = 5V; AV = +1, rising (10% to 90%) 5
Slew Rate Falling SR 7.5 11.5 V/μs V+ = 5V; AV = +1, falling (90% to 10%) 5
Supply Current (LMP7711) IS 1.15 1.4 mA V+ = 5V; enable mode, VEN ≥ 4.6V 5
Supply Current, Shutdown (per channel) IS 0.14 1 μA V+ = 5V; shutdown mode, VEN ≤ 0.4V 5
Enable Pin Voltage, Enable Mode VEN 4.6 V V+ = 5V 5
Enable Pin Voltage, Shutdown Mode VEN 0.4 V V+ = 5V 5
Enable Pin Input Current IEN 5.6 10 μA V+ = 5V; VEN = 5V 5
Enable Pin Input Current IEN 0.005 0.2 μA V+ = 5V; VEN = 0V 5

CAD (KiCad official)

  • Symbol: LMP7711MKE
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmp7711mke-etched.step / lmp7711mke-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmp7711mke.step / lmp7711mke.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 6c11c68131c01f7f, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF