Generated by kicad-footprint-generator · KiCad file format 20260206
LMP7711MKE
Texas Instruments · Precision Op Amps · TSOT-23-6
LMP7711MKE from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Single-amplifier output, which swings within 25 mV of either rail in the application notes; load-dependent swing is given in the electrical characteristics (for example, 32 mV high and 42 mV low at 5V with RL = 2 kΩ to V+/2). |
| 2 | V- | power_in | Negative power supply; the datasheet tests with V- = 0V and specifies the supply as VS = V+ − V-, with a 1.8V to 5.5V range over 0°C to 125°C and 2.0V to 5.5V over −40°C to 125°C. |
| 3 | +IN | input | Non-inverting input; the input common-mode range extends from −0.3V to 1.5V at 2.5V supply and from −0.3V to 4V at 5V supply, with CMRR ≥ 80 dB. |
| 4 | -IN | input | Inverting input; it shares the same common-mode voltage range as +IN and has an input bias current of 0.1 pA typical at 5V (VCM = 2.0V, TA = 25°C). |
| 5 | V+ | power_in | Positive power supply, specified at 1.8V to 5.5V; the supply current is 1.15 mA typical for the LMP7711 at 5V in enable mode. |
| 6 | EN | input | Enable pin: drive it at or above 2.1V (2.5V supply) or 4.6V (5V supply) for enable mode, or at or below 0.4V for shutdown, where supply current drops to 0.14 µA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Differential | VIN | -0.3 | 0.3 | V | 2 | ||
| Supply Voltage (V+ - V-) | VS | 6 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Supply Voltage | VS | 1.8 | 5.5 | V | 0°C ≤ TA ≤ 125°C | 2 | |
| Supply Voltage | VS | 2 | 5.5 | V | −40°C ≤ TA ≤ 125°C | 2 | |
| Package Thermal Resistance (6-Pin SOT) | θJA | 170 | °C/W | 6-Pin SOT | 2 | ||
| Input Offset Voltage | VOS | -180 | 20 | 180 | μV | V+ = 2.5V; TA = 25°C | 3 |
| Input Offset Voltage (temperature extremes) | VOS | -480 | 480 | μV | V+ = 2.5V; boldface limit, temperature extremes | 3 | |
| Input Bias Current | IB | 0.05 | 1 | pA | V+ = 2.5V; VCM = 1.0V; −40°C ≤ TA ≤ 85°C | 3 | |
| Input Offset Current | IOS | 0.006 | 0.5 | pA | V+ = 2.5V; VCM = 1.0V; TA = 25°C | 3 | |
| Common Mode Rejection Ratio | CMRR | 83 | 100 | dB | V+ = 2.5V; 0V ≤ VCM ≤ 1.4V; TA = 25°C | 3 | |
| Power Supply Rejection Ratio | PSRR | 85 | 100 | dB | V+ = 2.5V; 2.0V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C | 3 | |
| Power Supply Rejection Ratio | PSRR | 85 | 98 | dB | V+ = 2.5V; 1.8V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C | 3 | |
| Common Mode Voltage Range | CMVR | -0.3 | 1.5 | V | V+ = 2.5V; CMRR ≥ 80 dB | 3 | |
| Open Loop Voltage Gain | AVOL | 88 | 98 | dB | V+ = 2.5V; VO = 0.15 to 2.2V; RL = 2 kΩ to V+/2; TA = 25°C | 3 | |
| Open Loop Voltage Gain | AVOL | 92 | 114 | dB | V+ = 2.5V; VO = 0.15 to 2.2V; RL = 10 kΩ to V+/2; TA = 25°C | 3 | |
| Output Voltage Swing High | VOUT | 25 | 70 | mV | V+ = 2.5V; RL = 2 kΩ to V+/2; mV from either rail | 3 | |
| Output Voltage Swing High | VOUT | 20 | 60 | mV | V+ = 2.5V; RL = 10 kΩ to V+/2; mV from either rail | 3 | |
| Output Voltage Swing Low | VOUT | 30 | 70 | mV | V+ = 2.5V; RL = 2 kΩ to V+/2; mV from either rail | 3 | |
| Output Voltage Swing Low | VOUT | 15 | 60 | mV | V+ = 2.5V; RL = 10 kΩ to V+/2; mV from either rail | 3 | |
| Output Current Sourcing | IOUT | 36 | 52 | mA | V+ = 2.5V; sourcing to V-; VIN = 200 mV | 3 | |
| Output Current Sinking | IOUT | 7.5 | 15 | mA | V+ = 2.5V; sinking to V+; VIN = −200 mV | 3 | |
| Supply Current (LMP7711) | IS | 0.95 | 1.3 | mA | V+ = 2.5V; enable mode, VEN ≥ 2.1V | 3 | |
| Supply Current, Shutdown (per channel) | IS | 0.03 | 1 | μA | V+ = 2.5V; shutdown mode, VEN ≤ 0.4V | 3 | |
| Enable Pin Voltage, Enable Mode | VEN | 2.1 | V | V+ = 2.5V | 4 | ||
| Enable Pin Voltage, Shutdown Mode | VEN | 0.4 | V | V+ = 2.5V | 4 | ||
| Enable Pin Input Current | IEN | 1.5 | 3 | μA | V+ = 2.5V; VEN = 2.5V | 4 | |
| Enable Pin Input Current | IEN | 0.003 | 0.1 | μA | V+ = 2.5V; VEN = 0V | 4 | |
| Input Offset Voltage | VOS | -150 | 10 | 150 | μV | V+ = 5V; TA = 25°C | 4 |
| Input Offset Voltage (temperature extremes) | VOS | -450 | 450 | μV | V+ = 5V; boldface limit, temperature extremes | 4 | |
| Input Bias Current | IB | 0.1 | 1 | pA | V+ = 5V; VCM = 2.0V; −40°C ≤ TA ≤ 85°C | 4 | |
| Input Offset Current | IOS | 0.01 | 0.5 | pA | V+ = 5V; VCM = 2.0V; TA = 25°C | 4 | |
| Common Mode Rejection Ratio | CMRR | 85 | 100 | dB | V+ = 5V; 0V ≤ VCM ≤ 3.7V; TA = 25°C | 4 | |
| Power Supply Rejection Ratio | PSRR | 85 | 100 | dB | V+ = 5V; 2.0V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C | 4 | |
| Power Supply Rejection Ratio | PSRR | 85 | 98 | dB | V+ = 5V; 1.8V ≤ V+ ≤ 5.5V; V- = 0V, VCM = 0; TA = 25°C | 4 | |
| Common Mode Voltage Range | CMVR | -0.3 | 4 | V | V+ = 5V; CMRR ≥ 80 dB | 4 | |
| Open Loop Voltage Gain | AVOL | 88 | 107 | dB | V+ = 5V; VO = 0.3 to 4.7V; RL = 2 kΩ to V+/2; TA = 25°C | 5 | |
| Open Loop Voltage Gain | AVOL | 92 | 114 | dB | V+ = 5V; VO = 0.3 to 4.7V; RL = 10 kΩ to V+/2; TA = 25°C | 5 | |
| Output Voltage Swing High | VOUT | 32 | 70 | mV | V+ = 5V; RL = 2 kΩ to V+/2; mV from either rail | 5 | |
| Output Voltage Swing High | VOUT | 22 | 60 | mV | V+ = 5V; RL = 10 kΩ to V+/2; mV from either rail | 5 | |
| Output Voltage Swing Low (LMP7711) | VOUT | 42 | 70 | mV | V+ = 5V; RL = 2 kΩ to V+/2; mV from either rail | 5 | |
| Output Voltage Swing Low | VOUT | 20 | 60 | mV | V+ = 5V; RL = 10 kΩ to V+/2; mV from either rail | 5 | |
| Output Current Sourcing | IOUT | 46 | 66 | mA | V+ = 5V; sourcing to V-; VIN = 200 mV | 5 | |
| Output Current Sinking | IOUT | 10.5 | 23 | mA | V+ = 5V; sinking to V+; VIN = −200 mV | 5 | |
| Slew Rate Rising | SR | 6 | 9.5 | V/μs | V+ = 5V; AV = +1, rising (10% to 90%) | 5 | |
| Slew Rate Falling | SR | 7.5 | 11.5 | V/μs | V+ = 5V; AV = +1, falling (90% to 10%) | 5 | |
| Supply Current (LMP7711) | IS | 1.15 | 1.4 | mA | V+ = 5V; enable mode, VEN ≥ 4.6V | 5 | |
| Supply Current, Shutdown (per channel) | IS | 0.14 | 1 | μA | V+ = 5V; shutdown mode, VEN ≤ 0.4V | 5 | |
| Enable Pin Voltage, Enable Mode | VEN | 4.6 | V | V+ = 5V | 5 | ||
| Enable Pin Voltage, Shutdown Mode | VEN | 0.4 | V | V+ = 5V | 5 | ||
| Enable Pin Input Current | IEN | 5.6 | 10 | μA | V+ = 5V; VEN = 5V | 5 | |
| Enable Pin Input Current | IEN | 0.005 | 0.2 | μA | V+ = 5V; VEN = 0V | 5 |
CAD (KiCad official)
- Symbol:
LMP7711MKE - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmp7711mke-etched.step/lmp7711mke-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmp7711mke.step/lmp7711mke.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
6c11c68131c01f7f, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).