main
Ray Publish 0.1.0 ce4e986
{
  "slug": "lmh6881sq",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Differential OpAmps, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "operational amplifier-comparator",
    "lmh6881sq",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmh6881sq.kicad_sym",
    "lmh6881sq.kicad_mod",
    "lmh6881sq.glb",
    "lmh6881sq.step",
    "lmh6881sq.lbr",
    "docs/hero.png",
    "docs/lmh6881sq-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmh6881sq-hero.glb",
    "lmh6881sq-hero.overlay.json",
    "lmh6881sq-etched.glb"
  ],
  "component": {
    "mpn": "LMH6881SQ",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Operational Amplifier/Comparator",
    "subcategory": "Differential OpAmps",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmh6881.pdf",
    "parts": {
      "symbol": "lmh6881sq.kicad_sym",
      "footprint": "lmh6881sq.kicad_mod",
      "model_3d": "lmh6881sq-hero.glb",
      "model_3d_plain": "lmh6881sq-etched.glb",
      "model_3d_step": "lmh6881sq-etched.step",
      "model_3d_step_plain": "lmh6881sq.step",
      "lbr": "lmh6881sq.lbr"
    },
    "distributor_links": {
      "lcsc": "C701929",
      "mouser": "926-LMH6881SQ/NOPB"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T08:47:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 967 calls left today"
      },
      "mouser": {
        "pn": "926-LMH6881SQ/NOPB",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet gives no function for this pin."
      },
      {
        "number": "2",
        "name": "OCM",
        "type": "input",
        "description": "Output common-mode control with a gain of 2; OCM should be 1 V to 1.5 V to set the output common mode at 2 V to 3 V, must be driven from a low-noise external source, and must not be left floating."
      },
      {
        "number": "3",
        "name": "D1, SDI",
        "type": "input",
        "description": "In parallel mode it is attenuator control bit 1 (weight 2); in serial mode it is the SPI serial data input (SDI), with logic levels of VIL 0.4 V max and VIH 2.0 V to 5.0 V."
      },
      {
        "number": "4",
        "name": "D0, SDO",
        "type": "bidirectional",
        "description": "In parallel mode it is attenuator control bit 0 (internally biased low); in serial mode it is the open-emitter SPI serial data output (SDO), which requires an external bias resistor of 180 Ω to 400 Ω."
      },
      {
        "number": "5",
        "name": "SPI",
        "type": "input",
        "description": "Mode select: logic 0 (or left open, via internal weak pulldown) selects parallel mode and logic 1 selects serial SPI mode."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect to a low-impedance ground plane, as all pin voltages are referenced to the ground pins."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect to a low-impedance ground plane, as all pin voltages are referenced to the ground pins."
      },
      {
        "number": "8",
        "name": "INMS",
        "type": "input",
        "description": "Single-ended input minus (negative) with 50 Ω termination; an external 50-Ω resistor is required for single-ended signals and the differential inputs must be left disconnected in that case."
      },
      {
        "number": "9",
        "name": "INMD",
        "type": "input",
        "description": "Differential input minus (negative) with an internal 100-Ω resistive termination; single-ended inputs must be left disconnected when used."
      },
      {
        "number": "10",
        "name": "INPD",
        "type": "input",
        "description": "Differential input plus (positive) with an internal 100-Ω resistive termination; single-ended inputs must be left disconnected when used."
      },
      {
        "number": "11",
        "name": "INPS",
        "type": "input",
        "description": "Single-ended input plus (positive) with 50 Ω termination; an external 50-Ω resistor is required for single-ended signals and the differential inputs must be left disconnected in that case."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect to a low-impedance ground plane, as all pin voltages are referenced to the ground pins."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect to a low-impedance ground plane, as all pin voltages are referenced to the ground pins."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet gives no function for this pin."
      },
      {
        "number": "15",
        "name": "D2, CLK",
        "type": "input",
        "description": "In parallel mode it is attenuator control bit 2 (weight 2); in serial mode it is the SPI serial clock (CLK), which registers SDI on the rising edge."
      },
      {
        "number": "16",
        "name": "D3, CS",
        "type": "input",
        "description": "In parallel mode it is attenuator control bit 3 (weight 2); in serial mode it is the active-low SPI chip select (CS), with each write being 16 bits."
      },
      {
        "number": "17",
        "name": "SD",
        "type": "input",
        "description": "Shutdown in parallel mode: 0 = amplifier on, 1 = amplifier off; the pin is disabled in serial mode."
      },
      {
        "number": "18",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet gives no function for this pin."
      },
      {
        "number": "19",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; valid supply range is 4.75 V to 5.25 V (nominal 5 V)."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; valid supply range is 4.75 V to 5.25 V (nominal 5 V)."
      },
      {
        "number": "21",
        "name": "OUTM",
        "type": "output",
        "description": "Differential output minus (negative) with low impedance; the output common mode is set by the OCM pin."
      },
      {
        "number": "22",
        "name": "OUTP",
        "type": "output",
        "description": "Differential output plus (positive) with low impedance; the output common mode is set by the OCM pin."
      },
      {
        "number": "23",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; valid supply range is 4.75 V to 5.25 V (nominal 5 V)."
      },
      {
        "number": "24",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; valid supply range is 4.75 V to 5.25 V (nominal 5 V)."
      },
      {
        "number": "25",
        "name": "GND (exposed thermal pad)",
        "type": "power_in",
        "description": "Exposed thermal pad, internally bonded to the ground pins, which is the primary heat path and should be soldered to the PCB."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed pad is not in the pin table. Its number 25 comes from the package drawing (page 34 label; These pins have dual functions depending on SPI mode. The pin table lists them as I/O or input; the ; The datasheet lists VCC and GND as I/O in the pin table. They are typed power_in here, per the KiCad"
        ],
        "pages_sent": 37,
        "cost_usd": 0.161,
        "at": "2026-11-10T08:47:22"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmh6881.pdf",
        "pages": 37,
        "sha256": "8ca06ef36842f1bc",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmh6881sq.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmh6881sq-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "06d19bdae3f2ad1b6d1f08c6aca26cc9e6f53f49a86917abc9d0ded4f5744aad",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RTW0024A",
      "source_page": 34,
      "D": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "E1": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.8,
        "range_mm": [
          null,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lmh6881sq.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}