main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmh6521sqe: viewers rendered from the public page · Ray
lmh6521sqe-etched.glb Publish 0.1.0 · Ray
lmh6521sqe-etched.step lmh6521sqe: factory component page (tier=mfr) · Ray
lmh6521sqe-hero.glb lmh6521sqe: hero GLB from the etched model (keeps the MPN mark) · Ray
lmh6521sqe-hero.overlay.json Publish 0.1.0 · Ray
lmh6521sqe.glb Publish 0.1.0 · Ray
lmh6521sqe.kicad_mod Publish 0.1.0 · Ray
lmh6521sqe.kicad_sym Publish 0.1.0 · Ray
lmh6521sqe.lbr Publish 0.1.0 · Ray
lmh6521sqe.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

LMH6521SQE

Texas Instruments · Special Purpose Amplifiers · WQFN-32-EP(5x5)

LMH6521SQE from Texas Instruments, in a WQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A3/SDI/DNA input Channel A attenuation bit three (4-dB step) in parallel mode, serial data in in SPI mode, or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 2 resets gain to maximum.
2 A4/CLK/UPA input Channel A attenuation bit four (8-dB step) in parallel mode, serial clock in SPI mode, or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 1 resets gain to maximum.
3 A5 input Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, where it is connected to DC ground.
4 MOD0 input Digital mode control pin that floats to logic high if left unconnected; unused in serial mode, connect to DC ground.
5 MOD1 input Digital mode control pin that floats to logic high if left unconnected; unused in pulse mode, connect to DC ground.
6 B5 input Attenuation bit five (16-dB step) in parallel mode; unused in serial and pulse modes, connect to DC ground.
7 B4/UPB input Channel B attenuation bit four (8-dB step) in parallel mode or up pulse (logic 0 pulse increases gain one step) in pulse mode; pulsing with pin 8 resets gain to maximum, unused in serial mode (connect to DC ground).
8 B3/DNB input Channel B attenuation bit three (4-dB step) in parallel mode or down pulse (logic 0 pulse decreases gain one step) in pulse mode; pulsing with pin 7 resets gain to maximum, unused in serial mode (connect to DC ground).
9 B2/S1B input Channel B attenuation bit two (2-dB step) in parallel mode or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground.
10 B1/S0B input Channel B attenuation bit one (1-dB step) in parallel mode or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB); unused in serial mode, connect to DC ground.
11 INB+ input Channel B amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V.
12 INB- input Channel B amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V.
13 GND power_in Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them.
14 +5V power_in Power supply pin with a valid supply range of 4.75 V to 5.25 V.
15 GND power_in Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them.
16 B0 input Channel B attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground.
17 OUTB+ output Channel B amplifier noninverting output, externally biased to 0 V.
18 OUTB- output Channel B amplifier inverting output, externally biased to 0 V.
19 ENB input Channel B enable pin, logic 1 = enabled state (floats high if unconnected).
20 LATB input Channel B latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode.
21 LATA input Channel A latch pin (logic 0 = active, logic 1 = latched, gain does not change once high) used in parallel mode; connect to ground if latch is not desired or in serial mode.
22 ENA input Channel A enable pin, logic 1 = enabled state (floats high if unconnected).
23 OUTA- output Channel A amplifier inverting output, externally biased to 0 V.
24 OUTA+ output Channel A amplifier noninverting output, externally biased to 0 V.
25 A0 input Channel A attenuation bit zero (0.5-dB step, 000000 = maximum gain) in parallel mode; unused in serial and pulse modes, connect to DC ground.
26 GND power_in Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them.
27 +5V power_in Power supply pin with a valid supply range of 4.75 V to 5.25 V.
28 GND power_in Ground pin to connect to a low impedance ground plane; all pin voltages are specified with respect to these pins and the exposed pad is internally bonded to them.
29 INA- input Channel A amplifier inverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V.
30 INA+ input Channel A amplifier noninverting input, internally biased to mid supply; input voltage must not exceed V+ or go below GND by more than 0.5 V.
31 A1/SDO/S0A bidirectional Channel A attenuation bit one (1-dB step) in parallel mode, serial data out (SPI, tri-stated unless chip select asserted) in serial mode, or step size bit 0 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB).
32 A2/CS/S1A input Channel A attenuation bit two (2-dB step) in parallel mode, active-low serial chip select in SPI mode, or step size bit 1 in pulse mode ((0,0) = 0.5 dB; (0,1) = 1 dB; (1,0) = 2 dB; (1,1) = 6 dB).
33 GND power_in Exposed thermal pad, connect to a low impedance ground plane; it is internally bonded to the ground pins and must be soldered to the PCB for thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-32-EP(5x5)
Category Operational Amplifier/Comparator
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Positive supply voltage (pin 14 and 27) -0.6 5.5 V 6
Differential voltage between any two grounds 200 mV printed as < 200 mV 6
Analog input voltage -0.6 V upper limit printed as V+ 6
Digital input voltage -0.6 5.5 V 6
Soldering temperature, infrared or convection 260 °C 30 s 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage (pin 14 and 27) 4.75 5.25 V 6
Differential voltage between any two grounds 10 mV printed as < 10 mV 6
Analog input voltage, AC coupled 0 V AC coupled; upper limit printed as V+ 6
TA Ambient temperature TA -40 85 °C 6
VCC Supply voltage VCC 4.75 5 5.25 V 8
Input common mode voltage range 2 3 V Externally driven (DC coupled) 7
Channel gain matching -0.04 0.04 dB ChA, ChB, any gain setting 7
Channel phase matching -0.45 0.45 ° ChA, ChB, any gain setting 7
Cumulative gain error -0.1 0.1 dB 0 to 12 dB attenuation setting 7
Cumulative gain error -0.3 0.3 dB 0 to 24 dB attenuation setting 7
Cumulative gain error -0.5 0.5 dB 0 to 31 dB attenuation setting 7
Cumulative phase shift -0.6 0.6 ° 0 to 12 dB attenuation setting 7
Cumulative phase shift -5.3 5.3 ° 0 to 24 dB attenuation setting 7
Cumulative phase shift -16.5 16.5 ° 0 to 31 dB attenuation setting 7
Junction-to-ambient thermal resistance RθJA 45 °C/W 6
Junction-to-case (top) thermal resistance RθJC(top) 23.7 °C/W 6
Junction-to-board thermal resistance RθJB 9.1 °C/W 6
Junction-to-top characterization parameter ψJT 0.3 °C/W 6
Junction-to-board characterization parameter ψJB 9.1 °C/W 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 3.6 °C/W 6

CAD (KiCad official)

  • Symbol: LMH6521SQE
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: WQFN-32-EP(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmh6521sqe-etched.step / lmh6521sqe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmh6521sqe.step / lmh6521sqe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 40eceba984bf50bf, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF